Commit 5309498a authored by Uwe Kleine-König's avatar Uwe Kleine-König Committed by Sascha Hauer

ARM: imx: use imx_add_gpio_keys to register "gpio-keys" devices

LAKML-Reference: 1302207841-12450-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: default avatarUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 9c97f662
......@@ -129,6 +129,7 @@ choice
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
......@@ -254,6 +255,7 @@ config MACH_MX27_3DS
config MACH_IMX27_VISSTRIM_M10
bool "Vista Silicon i.MX27 Visstrim_m10"
select SOC_IMX27
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
......
......@@ -22,7 +22,6 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <video/platform_lcd.h>
......@@ -208,23 +207,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
},
};
static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
static const struct gpio_keys_platform_data
eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device eukrea_mbimxsd_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &eukrea_mbimxsd_button_data,
}
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_button_device,
&eukrea_mbimxsd_lcd_powerdev,
};
......@@ -299,4 +289,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
......@@ -27,7 +27,6 @@
#include <linux/mtd/physmap.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
......@@ -130,19 +129,12 @@ static struct gpio_keys_button visstrim_gpio_keys[] = {
}
};
static struct gpio_keys_platform_data visstrim_gpio_keys_platform_data = {
static const struct gpio_keys_platform_data
visstrim_gpio_keys_platform_data __initconst = {
.buttons = visstrim_gpio_keys,
.nbuttons = ARRAY_SIZE(visstrim_gpio_keys),
};
static struct platform_device visstrim_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &visstrim_gpio_keys_platform_data,
},
};
/* Visstrim_SM10 has a microSD slot connected to sdhc1 */
static int visstrim_m10_sdhc1_init(struct device *dev,
irq_handler_t detect_irq, void *data)
......@@ -186,7 +178,6 @@ static struct platform_device visstrim_m10_nor_mtd_device = {
};
static struct platform_device *platform_devices[] __initdata = {
&visstrim_gpio_keys_device,
&visstrim_m10_nor_mtd_device,
};
......@@ -255,6 +246,7 @@ static void __init visstrim_m10_board_init(void)
imx27_add_mxc_mmc(0, &visstrim_m10_sdhc_pdata);
imx27_add_mxc_ehci_otg(&visstrim_m10_usbotg_pdata);
imx27_add_fec(NULL);
imx_add_gpio_keys(&visstrim_gpio_keys_platform_data);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......
......@@ -68,6 +68,7 @@ config MACH_PCM037
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_SPI_IMX
help
Add support for PCM037 EET baseboard extensions. If you are using the
......@@ -168,6 +169,7 @@ config MACH_PCM043
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select SOC_IMX31
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
......@@ -233,6 +235,7 @@ choice
config MACH_EUKREA_MBIMXSD35_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
help
This adds board specific devices that can be found on Eukrea's
......@@ -244,6 +247,7 @@ config MACH_VPR200
bool "Support VPR200 platform"
select SOC_IMX35
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IMX_I2C
......
......@@ -26,7 +26,6 @@
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <video/platform_lcd.h>
#include <linux/i2c.h>
......@@ -223,23 +222,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
},
};
static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
static const struct gpio_keys_platform_data
eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device eukrea_mbimxsd_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &eukrea_mbimxsd_button_data,
}
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_button_device,
&eukrea_mbimxsd_lcd_powerdev,
};
......@@ -315,4 +305,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
......@@ -34,7 +34,6 @@
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/i2c.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
......@@ -280,20 +279,12 @@ static struct gpio_keys_button armadillo5x0_buttons[] = {
}
};
static struct gpio_keys_platform_data armadillo5x0_button_data = {
static const struct gpio_keys_platform_data
armadillo5x0_button_data __initconst = {
.buttons = armadillo5x0_buttons,
.nbuttons = ARRAY_SIZE(armadillo5x0_buttons),
};
static struct platform_device armadillo5x0_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &armadillo5x0_button_data,
}
};
/*
* NAND Flash
*/
......@@ -496,7 +487,6 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
static struct platform_device *devices[] __initdata = {
&armadillo5x0_smc911x_device,
&armadillo5x0_button_device,
};
/*
......@@ -508,6 +498,7 @@ static void __init armadillo5x0_init(void)
ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
platform_add_devices(devices, ARRAY_SIZE(devices));
imx_add_gpio_keys(&armadillo5x0_button_data);
imx31_add_imx_i2c1(NULL);
/* Register UART */
......
......@@ -7,7 +7,6 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
......@@ -156,20 +155,13 @@ static struct gpio_keys_button pcm037_gpio_keys[] = {
},
};
static struct gpio_keys_platform_data pcm037_gpio_keys_platform_data = {
static const struct gpio_keys_platform_data
pcm037_gpio_keys_platform_data __initconst = {
.buttons = pcm037_gpio_keys,
.nbuttons = ARRAY_SIZE(pcm037_gpio_keys),
.rep = 0, /* No auto-repeat */
};
static struct platform_device pcm037_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &pcm037_gpio_keys_platform_data,
},
};
static int __init eet_init_devices(void)
{
if (!machine_is_pcm037() || pcm037_variant() != PCM037_EET)
......@@ -182,9 +174,8 @@ static int __init eet_init_devices(void)
spi_register_board_info(pcm037_spi_dev, ARRAY_SIZE(pcm037_spi_dev));
imx31_add_spi_imx0(&pcm037_spi1_pdata);
platform_device_register(&pcm037_gpio_keys_device);
imx_add_gpio_keys(&pcm037_gpio_keys_platform_data);
return 0;
}
late_initcall(eet_init_devices);
......@@ -141,18 +141,12 @@ static struct gpio_keys_button vpr200_gpio_keys_table[] = {
{KEY_F9, GPIO_BUTTON8, 1, "vpr-keys: F9", 1, VPR_KEY_DEBOUNCE},
};
static struct gpio_keys_platform_data vpr200_gpio_keys_data = {
static const struct gpio_keys_platform_data
vpr200_gpio_keys_data __initconst = {
.buttons = vpr200_gpio_keys_table,
.nbuttons = ARRAY_SIZE(vpr200_gpio_keys_table),
};
static struct platform_device vpr200_device_gpiokeys = {
.name = "gpio-keys",
.dev = {
.platform_data = &vpr200_gpio_keys_data,
}
};
static struct mc13xxx_platform_data vpr200_pmic = {
.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
};
......@@ -271,7 +265,6 @@ static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
static struct platform_device *devices[] __initdata = {
&vpr200_flash,
&vpr200_device_gpiokeys,
};
/*
......@@ -283,6 +276,7 @@ static void __init vpr200_board_init(void)
imx35_add_fec(NULL);
imx35_add_imx2_wdt(NULL);
imx_add_gpio_keys(&vpr200_gpio_keys_data);
platform_add_devices(devices, ARRAY_SIZE(devices));
......
......@@ -27,7 +27,6 @@
#include <linux/irq.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/i2c.h>
......@@ -108,23 +107,14 @@ static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
},
};
static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
static const struct gpio_keys_platform_data
eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device eukrea_mbimxsd_button_device = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &eukrea_mbimxsd_button_data,
}
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_leds_gpio,
&eukrea_mbimxsd_button_device,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
......@@ -166,4 +156,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment