arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection

On boards where the only peripheral connected to PL0/PL1 is an X-Powers
PMIC, configure the connection to use the RSB bus rather than the I2C
bus. Compared to the I2C controller that shares the pins, the RSB
controller allows a higher bus frequency, and it is more CPU-efficient.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210103100007.32867-5-samuel@sholland.org

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -150,12 +150,28 @@ &pio {
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_i2c {
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * FIXME: We can't add that supply for now since it would
+	 * create a circular dependency between pinctrl, the regulator
+	 * and the RSB Bus.
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic@36 {
+	axp805: pmic@745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -273,22 +289,6 @@ sw {
 	};
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * PL0 and PL1 are used for PMIC I2C
-	 * don't enable the pl-supply else
-	 * it will fail at boot
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
 &rtc {
 	clocks = <&ext_osc32k>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -175,12 +175,16 @@ &pio {
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_i2c {
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic@36 {
+	axp805: pmic@745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -291,10 +295,6 @@ sw {
 	};
 };
 
-&r_ir {
-	status = "okay";
-};
-
 &rtc {
 	clocks = <&ext_osc32k>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -112,12 +112,20 @@ &pio {
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_i2c {
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
+&r_rsb {
 	status = "okay";
 
-	axp805: pmic@36 {
+	axp805: pmic@745 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x36>;
+		reg = <0x745>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -232,14 +240,6 @@ sw {
 	};
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
 &rtc {
 	clocks = <&ext_osc32k>;
 };