Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits)
  OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC
  OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store()
  OMAP: DSS2: Fix error path in omap_dsi_update()
  OMAP: DSS2: TDO35S: fix video signaling
  OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes
  OMAP: DSS2: OMAPFB: Fix probe error path
  OMAP3EVM: Replace vdvi regulator supply with vdds_dsi
  OMAP: DSS2: Remove extra return statement
  OMAP: DSS2: adjust YUV overlay width to be even
  OMAP: DSS2: OMAPFB: Fix sysfs mirror input check
  OMAP: DSS2: OMAPFB: Remove redundant color register range check
  OMAP: DSS2: OMAPFB: Remove redundant rotate range check
  OMAP: DSS2: OMAPFB: Check fb2display() return value
  OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged
  OMAP: DSS2: DSI: detect unsupported update requests
  OMAP: DSS2: DSI: increase FIFO low threshold
  OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO
  OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size
  OMAP: DSS2: change manual update scaling setup
  OMAP: DSS2: DSI: use BTA to end the frame transfer
  ...

arch/arm/mach-omap2/board-omap3evm.c

@@ -514,14 +514,11 @@ static struct regulator_init_data omap3_evm_vdac = {
 };
 
 /* VPLL2 for digital video outputs */
-static struct regulator_consumer_supply omap3_evm_vpll2_supply = {
-	.supply		= "vdvi",
-	.dev		= &omap3_evm_lcd_device.dev,
-};
+static struct regulator_consumer_supply omap3_evm_vpll2_supply =
+	REGULATOR_SUPPLY("vdds_dsi", "omapdss");
 
 static struct regulator_init_data omap3_evm_vpll2 = {
 	.constraints = {
-		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
 		.apply_uV		= true,

arch/arm/plat-omap/include/plat/display.h

@@ -238,7 +238,7 @@ int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param);
 int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
 int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
 int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data);
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data);
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2);
 int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
 int dsi_vc_send_null(int channel);
 int dsi_vc_send_bta_sync(int channel);
@@ -277,8 +277,8 @@ struct omap_video_timings {
  * identify the mode, and does not actually use the configs
  * itself. However, the configs should be something that
  * a normal monitor can also show */
-const extern struct omap_video_timings omap_dss_pal_timings;
-const extern struct omap_video_timings omap_dss_ntsc_timings;
+extern const struct omap_video_timings omap_dss_pal_timings;
+extern const struct omap_video_timings omap_dss_ntsc_timings;
 #endif
 
 struct omap_overlay_info {
@@ -560,7 +560,8 @@ void omapdss_dsi_vc_enable_hs(int channel, bool enable);
 int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable);
 
 int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
-				    u16 *x, u16 *y, u16 *w, u16 *h);
+				    u16 *x, u16 *y, u16 *w, u16 *h,
+				    bool enlarge_update_area);
 int omap_dsi_update(struct omap_dss_device *dssdev,
 		int channel,
 		u16 x, u16 y, u16 w, u16 h,

arch/arm/plat-omap/include/plat/nokia-dsi-panel.h

+#ifndef __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+#define __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H
+
+#include "display.h"
+
+/**
+ * struct nokia_dsi_panel_data - Nokia DSI panel driver configuration
+ * @name: panel name
+ * @use_ext_te: use external TE
+ * @ext_te_gpio: external TE GPIO
+ * @use_esd_check: perform ESD checks
+ * @max_backlight_level: maximum backlight level
+ * @set_backlight: pointer to backlight set function
+ * @get_backlight: pointer to backlight get function
+ */
+struct nokia_dsi_panel_data {
+	const char *name;
+
+	int reset_gpio;
+
+	bool use_ext_te;
+	int ext_te_gpio;
+
+	bool use_esd_check;
+
+	int max_backlight_level;
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+#endif /* __ARCH_ARM_PLAT_OMAP_NOKIA_DSI_PANEL_H */

drivers/video/omap2/displays/panel-toppoly-tdo35s.c

@@ -73,8 +73,12 @@ static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
 
 static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
 {
-	dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
-		OMAP_DSS_LCD_IHS;
+	dssdev->panel.config = OMAP_DSS_LCD_TFT |
+			       OMAP_DSS_LCD_IVS |
+			       OMAP_DSS_LCD_IHS |
+			       OMAP_DSS_LCD_IPC |
+			       OMAP_DSS_LCD_ONOFF;
+
 	dssdev->panel.timings = toppoly_tdo_panel_timings;
 
 	return 0;

drivers/video/omap2/dss/dispc.c

@@ -31,6 +31,7 @@
 #include <linux/seq_file.h>
 #include <linux/delay.h>
 #include <linux/workqueue.h>
+#include <linux/hardirq.h>
 
 #include <plat/sram.h>
 #include <plat/clock.h>
@@ -335,7 +336,7 @@ void dispc_save_context(void)
 void dispc_restore_context(void)
 {
 	RR(SYSCONFIG);
-	RR(IRQENABLE);
+	/*RR(IRQENABLE);*/
 	/*RR(CONTROL);*/
 	RR(CONFIG);
 	RR(DEFAULT_COLOR0);
@@ -472,6 +473,15 @@ void dispc_restore_context(void)
 
 	/* enable last, because LCD & DIGIT enable are here */
 	RR(CONTROL);
+
+	/* clear spurious SYNC_LOST_DIGIT interrupts */
+	dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
+
+	/*
+	 * enable last so IRQs won't trigger before
+	 * the context is fully restored
+	 */
+	RR(IRQENABLE);
 }
 
 #undef SR
@@ -3019,7 +3029,7 @@ void dispc_fake_vsync_irq(void)
 	u32 irqstatus = DISPC_IRQ_VSYNC;
 	int i;
 
-	local_irq_disable();
+	WARN_ON(!in_interrupt());
 
 	for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
 		struct omap_dispc_isr_data *isr_data;
@@ -3031,8 +3041,6 @@ void dispc_fake_vsync_irq(void)
 		if (isr_data->mask & irqstatus)
 			isr_data->isr(isr_data->arg, irqstatus);
 	}
-
-	local_irq_enable();
 }
 #endif
 

drivers/video/omap2/dss/display.c

@@ -82,6 +82,9 @@ static ssize_t display_upd_mode_store(struct device *dev,
 	int val, r;
 	enum omap_dss_update_mode mode;
 
+	if (!dssdev->driver->set_update_mode)
+		return -EINVAL;
+
 	val = simple_strtoul(buf, NULL, 10);
 
 	switch (val) {
@@ -343,7 +346,6 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
 	case OMAP_DISPLAY_TYPE_VENC:
 	case OMAP_DISPLAY_TYPE_SDI:
 		return 24;
-		return 24;
 	default:
 		BUG();
 	}

drivers/video/omap2/dss/dss.c

@@ -265,6 +265,9 @@ void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI1_PLL_FCLK)
+		dsi_wait_dsi1_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 0, 0);	/* DISPC_CLK_SWITCH */
 
 	dss.dispc_clk_source = clk_src;
@@ -279,6 +282,9 @@ void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
 
 	b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
 
+	if (clk_src == DSS_SRC_DSI2_PLL_FCLK)
+		dsi_wait_dsi2_pll_active();
+
 	REG_FLD_MOD(DSS_CONTROL, b, 1, 1);	/* DSI_CLK_SWITCH */
 
 	dss.dsi_clk_source = clk_src;

drivers/video/omap2/dss/dss.h

@@ -199,7 +199,8 @@ int dss_init_overlay_managers(struct platform_device *pdev);
 void dss_uninit_overlay_managers(struct platform_device *pdev);
 int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-				u16 *x, u16 *y, u16 *w, u16 *h);
+				u16 *x, u16 *y, u16 *w, u16 *h,
+				bool enlarge_update_area);
 void dss_start_update(struct omap_dss_device *dssdev);
 
 /* overlay */
@@ -281,6 +282,8 @@ void dsi_pll_uninit(void);
 void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
 		u32 fifo_size, enum omap_burst_size *burst_size,
 		u32 *fifo_low, u32 *fifo_high);
+void dsi_wait_dsi1_pll_active(void);
+void dsi_wait_dsi2_pll_active(void);
 #else
 static inline int dsi_init(struct platform_device *pdev)
 {
@@ -289,6 +292,12 @@ static inline int dsi_init(struct platform_device *pdev)
 static inline void dsi_exit(void)
 {
 }
+static inline void dsi_wait_dsi1_pll_active(void)
+{
+}
+static inline void dsi_wait_dsi2_pll_active(void)
+{
+}
 #endif
 
 /* DPI */

drivers/video/omap2/dss/manager.c

@@ -440,6 +440,10 @@ struct manager_cache_data {
 
 	/* manual update region */
 	u16 x, y, w, h;
+
+	/* enlarge the update area if the update area contains scaled
+	 * overlays */
+	bool enlarge_update_area;
 };
 
 static struct {
@@ -525,7 +529,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
 	int i;
 	struct omap_dss_device *dssdev = mgr->device;
 
-	if (!dssdev)
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
 		return 0;
 
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
@@ -596,11 +600,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
 	int r;
 	int i;
 
-	if (!ovl->manager || !ovl->manager->device)
+	if (!ovl->manager)
 		return 0;
 
 	dssdev = ovl->manager->device;
 
+	if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
 	if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
 		irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
 		channel = OMAP_DSS_CHANNEL_DIGIT;
@@ -718,6 +725,7 @@ static int configure_overlay(enum omap_plane plane)
 	u16 x, y, w, h;
 	u32 paddr;
 	int r;
+	u16 orig_w, orig_h, orig_outw, orig_outh;
 
 	DSSDBGF("%d", plane);
 
@@ -738,8 +746,16 @@ static int configure_overlay(enum omap_plane plane)
 	outh = c->out_height == 0 ? c->height : c->out_height;
 	paddr = c->paddr;
 
+	orig_w = w;
+	orig_h = h;
+	orig_outw = outw;
+	orig_outh = outh;
+
 	if (c->manual_update && mc->do_manual_update) {
 		unsigned bpp;
+		unsigned scale_x_m = w, scale_x_d = outw;
+		unsigned scale_y_m = h, scale_y_d = outh;
+
 		/* If the overlay is outside the update region, disable it */
 		if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
 					x, y, outw, outh)) {
@@ -770,38 +786,47 @@ static int configure_overlay(enum omap_plane plane)
 			BUG();
 		}
 
-		if (dispc_is_overlay_scaled(c)) {
-			/* If the overlay is scaled, the update area has
-			 * already been enlarged to cover the whole overlay. We
-			 * only need to adjust x/y here */
-			x = c->pos_x - mc->x;
-			y = c->pos_y - mc->y;
+		if (mc->x > c->pos_x) {
+			x = 0;
+			outw -= (mc->x - c->pos_x);
+			paddr += (mc->x - c->pos_x) *
+				scale_x_m / scale_x_d * bpp / 8;
 		} else {
-			if (mc->x > c->pos_x) {
-				x = 0;
-				w -= (mc->x - c->pos_x);
-				paddr += (mc->x - c->pos_x) * bpp / 8;
-			} else {
-				x = c->pos_x - mc->x;
-			}
-
-			if (mc->y > c->pos_y) {
-				y = 0;
-				h -= (mc->y - c->pos_y);
-				paddr += (mc->y - c->pos_y) * c->screen_width *
-					bpp / 8;
-			} else {
-				y = c->pos_y - mc->y;
-			}
-
-			if (mc->w < (x+w))
-				w -= (x+w) - (mc->w);
+			x = c->pos_x - mc->x;
+		}
 
-			if (mc->h < (y+h))
-				h -= (y+h) - (mc->h);
+		if (mc->y > c->pos_y) {
+			y = 0;
+			outh -= (mc->y - c->pos_y);
+			paddr += (mc->y - c->pos_y) *
+				scale_y_m / scale_y_d *
+				c->screen_width * bpp / 8;
+		} else {
+			y = c->pos_y - mc->y;
+		}
 
-			outw = w;
-			outh = h;
+		if (mc->w < (x + outw))
+			outw -= (x + outw) - (mc->w);
+
+		if (mc->h < (y + outh))
+			outh -= (y + outh) - (mc->h);
+
+		w = w * outw / orig_outw;
+		h = h * outh / orig_outh;
+
+		/* YUV mode overlay's input width has to be even and the
+		 * algorithm above may adjust the width to be odd.
+		 *
+		 * Here we adjust the width if needed, preferring to increase
+		 * the width if the original width was bigger.
+		 */
+		if ((w & 1) &&
+				(c->color_mode == OMAP_DSS_COLOR_YUV2 ||
+				 c->color_mode == OMAP_DSS_COLOR_UYVY)) {
+			if (orig_w > w)
+				w += 1;
+			else
+				w -= 1;
 		}
 	}
 
@@ -960,7 +985,7 @@ static void make_even(u16 *x, u16 *w)
 /* Configure dispc for partial update. Return possibly modified update
  * area */
 void dss_setup_partial_planes(struct omap_dss_device *dssdev,
-		u16 *xi, u16 *yi, u16 *wi, u16 *hi)
+		u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area)
 {
 	struct overlay_cache_data *oc;
 	struct manager_cache_data *mc;
@@ -969,6 +994,7 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 	int i;
 	u16 x, y, w, h;
 	unsigned long flags;
+	bool area_changed;
 
 	x = *xi;
 	y = *yi;
@@ -989,73 +1015,91 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
 
 	spin_lock_irqsave(&dss_cache.lock, flags);
 
-	/* We need to show the whole overlay if it is scaled. So look for
-	 * those, and make the update area larger if found.
-	 * Also mark the overlay cache dirty */
-	for (i = 0; i < num_ovls; ++i) {
-		unsigned x1, y1, x2, y2;
-		unsigned outw, outh;
+	/*
+	 * Execute the outer loop until the inner loop has completed
+	 * once without increasing the update area. This will ensure that
+	 * all scaled overlays end up completely within the update area.
+	 */
+	do {
+		area_changed = false;
 
-		oc = &dss_cache.overlay_cache[i];
+		/* We need to show the whole overlay if it is scaled. So look
+		 * for those, and make the update area larger if found.
+		 * Also mark the overlay cache dirty */
+		for (i = 0; i < num_ovls; ++i) {
+			unsigned x1, y1, x2, y2;
+			unsigned outw, outh;
 
-		if (oc->channel != mgr->id)
-			continue;
+			oc = &dss_cache.overlay_cache[i];
 
-		oc->dirty = true;
+			if (oc->channel != mgr->id)
+				continue;
 
-		if (!oc->enabled)
-			continue;
+			oc->dirty = true;
 
-		if (!dispc_is_overlay_scaled(oc))
-			continue;
+			if (!enlarge_update_area)
+				continue;
 
-		outw = oc->out_width == 0 ? oc->width : oc->out_width;
-		outh = oc->out_height == 0 ? oc->height : oc->out_height;
+			if (!oc->enabled)
+				continue;
 
-		/* is the overlay outside the update region? */
-		if (!rectangle_intersects(x, y, w, h,
-					oc->pos_x, oc->pos_y,
-					outw, outh))
-			continue;
+			if (!dispc_is_overlay_scaled(oc))
+				continue;
 
-		/* if the overlay totally inside the update region? */
-		if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
-					x, y, w, h))
-			continue;
+			outw = oc->out_width == 0 ?
+				oc->width : oc->out_width;
+			outh = oc->out_height == 0 ?
+				oc->height : oc->out_height;
+
+			/* is the overlay outside the update region? */
+			if (!rectangle_intersects(x, y, w, h,
+						oc->pos_x, oc->pos_y,
+						outw, outh))
+				continue;
 
-		if (x > oc->pos_x)
-			x1 = oc->pos_x;
-		else
-			x1 = x;
+			/* if the overlay totally inside the update region? */
+			if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
+						x, y, w, h))
+				continue;
 
-		if (y > oc->pos_y)
-			y1 = oc->pos_y;
-		else
-			y1 = y;
+			if (x > oc->pos_x)
+				x1 = oc->pos_x;
+			else
+				x1 = x;
 
-		if ((x + w) < (oc->pos_x + outw))
-			x2 = oc->pos_x + outw;
-		else
-			x2 = x + w;
+			if (y > oc->pos_y)
+				y1 = oc->pos_y;
+			else
+				y1 = y;
 
-		if ((y + h) < (oc->pos_y + outh))
-			y2 = oc->pos_y + outh;
-		else
-			y2 = y + h;
+			if ((x + w) < (oc->pos_x + outw))
+				x2 = oc->pos_x + outw;
+			else
+				x2 = x + w;
 
-		x = x1;
-		y = y1;
-		w = x2 - x1;
-		h = y2 - y1;
+			if ((y + h) < (oc->pos_y + outh))
+				y2 = oc->pos_y + outh;
+			else
+				y2 = y + h;
 
-		make_even(&x, &w);
+			x = x1;
+			y = y1;
+			w = x2 - x1;
+			h = y2 - y1;
 
-		DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
+			make_even(&x, &w);
+
+			DSSDBG("changing upd area due to ovl(%d) "
+			       "scaling %d,%d %dx%d\n",
 				i, x, y, w, h);
-	}
+
+			area_changed = true;
+		}
+	} while (area_changed);
 
 	mc = &dss_cache.manager_cache[mgr->id];
 	mc->do_manual_update = true;
+	mc->enlarge_update_area = enlarge_update_area;
 	mc->x = x;
 	mc->y = y;
 	mc->w = w;

drivers/video/omap2/dss/overlay.c

@@ -65,7 +65,7 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
 		for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
 			mgr = omap_dss_get_overlay_manager(i);
 
-			if (strncmp(buf, mgr->name, len) == 0)
+			if (sysfs_streq(buf, mgr->name))
 				break;
 
 			mgr = NULL;

drivers/video/omap2/dss/rfbi.c

@@ -886,7 +886,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
 		return -EINVAL;
 
 	if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
-		dss_setup_partial_planes(dssdev, x, y, w, h);
+		dss_setup_partial_planes(dssdev, x, y, w, h, true);
 		dispc_set_lcd_size(*w, *h);
 	}
 

drivers/video/omap2/omapfb/omapfb-ioctl.c

@@ -34,12 +34,37 @@
 
 #include "omapfb.h"
 
+static u8 get_mem_idx(struct omapfb_info *ofbi)
+{
+	if (ofbi->id == ofbi->region->id)
+		return 0;
+
+	return OMAPFB_MEM_IDX_ENABLED | ofbi->region->id;
+}
+
+static struct omapfb2_mem_region *get_mem_region(struct omapfb_info *ofbi,
+						 u8 mem_idx)
+{
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+
+	if (mem_idx & OMAPFB_MEM_IDX_ENABLED)
+		mem_idx &= OMAPFB_MEM_IDX_MASK;
+	else
+		mem_idx = ofbi->id;
+
+	if (mem_idx >= fbdev->num_fbs)
+		return NULL;
+
+	return &fbdev->regions[mem_idx];
+}
+
 static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 {
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omap_overlay *ovl;
-	struct omap_overlay_info info;
+	struct omap_overlay_info old_info;
+	struct omapfb2_mem_region *old_rg, *new_rg;
 	int r = 0;
 
 	DBG("omapfb_setup_plane\n");
@@ -52,36 +77,106 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	/* XXX uses only the first overlay */
 	ovl = ofbi->overlays[0];
 
-	if (pi->enabled && !ofbi->region.size) {
+	old_rg = ofbi->region;
+	new_rg = get_mem_region(ofbi, pi->mem_idx);
+	if (!new_rg) {
+		r = -EINVAL;
+		goto out;
+	}
+
+	/* Take the locks in a specific order to keep lockdep happy */
+	if (old_rg->id < new_rg->id) {
+		omapfb_get_mem_region(old_rg);
+		omapfb_get_mem_region(new_rg);
+	} else if (new_rg->id < old_rg->id) {
+		omapfb_get_mem_region(new_rg);
+		omapfb_get_mem_region(old_rg);
+	} else
+		omapfb_get_mem_region(old_rg);
+
+	if (pi->enabled && !new_rg->size) {
 		/*
 		 * This plane's memory was freed, can't enable it
 		 * until it's reallocated.
 		 */
 		r = -EINVAL;
-		goto out;
+		goto put_mem;
 	}
 
-	ovl->get_overlay_info(ovl, &info);
+	ovl->get_overlay_info(ovl, &old_info);
 
-	info.pos_x = pi->pos_x;
-	info.pos_y = pi->pos_y;
-	info.out_width = pi->out_width;
-	info.out_height = pi->out_height;
-	info.enabled = pi->enabled;
+	if (old_rg != new_rg) {
+		ofbi->region = new_rg;
+		set_fb_fix(fbi);
+	}
 
-	r = ovl->set_overlay_info(ovl, &info);
-	if (r)
-		goto out;
+	if (pi->enabled) {
+		struct omap_overlay_info info;
 
-	if (ovl->manager) {
-		r = ovl->manager->apply(ovl->manager);
+		r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
+			pi->out_width, pi->out_height);
 		if (r)
-			goto out;
+			goto undo;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		if (!info.enabled) {
+			info.enabled = pi->enabled;
+			r = ovl->set_overlay_info(ovl, &info);
+			if (r)
+				goto undo;
+		}
+	} else {
+		struct omap_overlay_info info;
+
+		ovl->get_overlay_info(ovl, &info);
+
+		info.enabled = pi->enabled;
+		info.pos_x = pi->pos_x;
+		info.pos_y = pi->pos_y;
+		info.out_width = pi->out_width;
+		info.out_height = pi->out_height;
+
+		r = ovl->set_overlay_info(ovl, &info);
+		if (r)
+			goto undo;
 	}
 
-out:
-	if (r)
-		dev_err(fbdev->dev, "setup_plane failed\n");
+	if (ovl->manager)
+		ovl->manager->apply(ovl->manager);
+
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+
+	return 0;
+
+ undo:
+	if (old_rg != new_rg) {
+		ofbi->region = old_rg;
+		set_fb_fix(fbi);
+	}
+
+	ovl->set_overlay_info(ovl, &old_info);
+ put_mem:
+	/* Release the locks in a specific order to keep lockdep happy */
+	if (old_rg->id > new_rg->id) {
+		omapfb_put_mem_region(old_rg);
+		omapfb_put_mem_region(new_rg);
+	} else if (new_rg->id > old_rg->id) {
+		omapfb_put_mem_region(new_rg);
+		omapfb_put_mem_region(old_rg);
+	} else
+		omapfb_put_mem_region(old_rg);
+ out:
+	dev_err(fbdev->dev, "setup_plane failed\n");
+
 	return r;
 }
 
@@ -92,8 +187,8 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 	if (ofbi->num_overlays != 1) {
 		memset(pi, 0, sizeof(*pi));
 	} else {
-		struct omap_overlay_info *ovli;
 		struct omap_overlay *ovl;
+		struct omap_overlay_info *ovli;
 
 		ovl = ofbi->overlays[0];
 		ovli = &ovl->info;
@@ -103,6 +198,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
 		pi->enabled = ovli->enabled;
 		pi->channel_out = 0; /* xxx */
 		pi->mirror = 0;
+		pi->mem_idx = get_mem_idx(ofbi);
 		pi->out_width = ovli->out_width;
 		pi->out_height = ovli->out_height;
 	}
@@ -115,7 +211,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_device *fbdev = ofbi->fbdev;
 	struct omapfb2_mem_region *rg;
-	int r, i;
+	int r = 0, i;
 	size_t size;
 
 	if (mi->type > OMAPFB_MEMTYPE_MAX)
@@ -123,22 +219,44 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 
 	size = PAGE_ALIGN(mi->size);
 
-	rg = &ofbi->region;
+	rg = ofbi->region;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled)
-			return -EBUSY;
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
+		}
 	}
 
 	if (rg->size != size || rg->type != mi->type) {
 		r = omapfb_realloc_fbmem(fbi, size, mi->type);
 		if (r) {
 			dev_err(fbdev->dev, "realloc fbmem failed\n");
-			return r;
+			goto out;
 		}
 	}
 
-	return 0;
+ out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
+	return r;
 }
 
 static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
@@ -146,12 +264,14 @@ static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 	struct omapfb2_mem_region *rg;
 
-	rg = &ofbi->region;
+	rg = omapfb_get_mem_region(ofbi->region);
 	memset(mi, 0, sizeof(*mi));
 
 	mi->size = rg->size;
 	mi->type = rg->type;
 
+	omapfb_put_mem_region(rg);
+
 	return 0;
 }
 
@@ -490,6 +610,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 		struct omapfb_vram_info		vram_info;
 		struct omapfb_tearsync_info	tearsync_info;
 		struct omapfb_display_info	display_info;
+		u32				crt;
 	} p;
 
 	int r = 0;
@@ -648,6 +769,17 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			r = -EFAULT;
 		break;
 
+	case FBIO_WAITFORVSYNC:
+		if (get_user(p.crt, (__u32 __user *)arg)) {
+			r = -EFAULT;
+			break;
+		}
+		if (p.crt != 0) {
+			r = -ENODEV;
+			break;
+		}
+		/* FALLTHROUGH */
+
 	case OMAPFB_WAITFORVSYNC:
 		DBG("ioctl WAITFORVSYNC\n");
 		if (!display) {
@@ -738,7 +870,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
 			break;
 		}
 
-		if (!display->driver->enable_te) {
+		if (!display || !display->driver->enable_te) {
 			r = -ENODEV;
 			break;
 		}

drivers/video/omap2/omapfb/omapfb-sysfs.c

@@ -49,6 +49,7 @@ static ssize_t store_rotate_type(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_mem_region *rg;
 	enum omap_dss_rotation_type rot_type;
 	int r;
 
@@ -64,9 +65,11 @@ static ssize_t store_rotate_type(struct device *dev,
 	if (rot_type == ofbi->rotation_type)
 		goto out;
 
-	if (ofbi->region.size) {
+	rg = omapfb_get_mem_region(ofbi->region);
+
+	if (rg->size) {
 		r = -EBUSY;
-		goto out;
+		goto put_region;
 	}
 
 	ofbi->rotation_type = rot_type;
@@ -75,6 +78,8 @@ static ssize_t store_rotate_type(struct device *dev,
 	 * Since the VRAM for this FB is not allocated at the moment we don't
 	 * need to do any further parameter checking at this point.
 	 */
+put_region:
+	omapfb_put_mem_region(rg);
 out:
 	unlock_fb_info(fbi);
 
@@ -97,7 +102,7 @@ static ssize_t store_mirror(struct device *dev,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
-	bool mirror;
+	unsigned long mirror;
 	int r;
 	struct fb_var_screeninfo new_var;
 
@@ -111,6 +116,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	ofbi->mirror = mirror;
 
+	omapfb_get_mem_region(ofbi->region);
+
 	memcpy(&new_var, &fbi->var, sizeof(new_var));
 	r = check_fb_var(fbi, &new_var);
 	if (r)
@@ -125,6 +132,8 @@ static ssize_t store_mirror(struct device *dev,
 
 	r = count;
 out:
+	omapfb_put_mem_region(ofbi->region);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -263,11 +272,15 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 
 		DBG("detaching %d\n", ofbi->overlays[i]->id);
 
+		omapfb_get_mem_region(ofbi->region);
+
 		omapfb_overlay_enable(ovl, 0);
 
 		if (ovl->manager)
 			ovl->manager->apply(ovl->manager);
 
+		omapfb_put_mem_region(ofbi->region);
+
 		for (t = i + 1; t < ofbi->num_overlays; t++) {
 			ofbi->rotation[t-1] = ofbi->rotation[t];
 			ofbi->overlays[t-1] = ofbi->overlays[t];
@@ -300,7 +313,12 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
 	}
 
 	if (added) {
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 	}
@@ -388,7 +406,12 @@ static ssize_t store_overlays_rotate(struct device *dev,
 		for (i = 0; i < num_ovls; ++i)
 			ofbi->rotation[i] = rotation[i];
 
+		omapfb_get_mem_region(ofbi->region);
+
 		r = omapfb_apply_changes(fbi, 0);
+
+		omapfb_put_mem_region(ofbi->region);
+
 		if (r)
 			goto out;
 
@@ -408,7 +431,7 @@ static ssize_t show_size(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
+	return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region->size);
 }
 
 static ssize_t store_size(struct device *dev, struct device_attribute *attr,
@@ -416,6 +439,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 {
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
+	struct omapfb2_device *fbdev = ofbi->fbdev;
+	struct omapfb2_mem_region *rg;
 	unsigned long size;
 	int r;
 	int i;
@@ -425,15 +450,33 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 	if (!lock_fb_info(fbi))
 		return -ENODEV;
 
-	for (i = 0; i < ofbi->num_overlays; i++) {
-		if (ofbi->overlays[i]->info.enabled) {
-			r = -EBUSY;
-			goto out;
+	rg = ofbi->region;
+
+	down_write_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+
+	if (atomic_read(&rg->map_count)) {
+		r = -EBUSY;
+		goto out;
+	}
+
+	for (i = 0; i < fbdev->num_fbs; i++) {
+		struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+		int j;
+
+		if (ofbi2->region != rg)
+			continue;
+
+		for (j = 0; j < ofbi2->num_overlays; j++) {
+			if (ofbi2->overlays[j]->info.enabled) {
+				r = -EBUSY;
+				goto out;
+			}
 		}
 	}
 
-	if (size != ofbi->region.size) {
-		r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
+	if (size != ofbi->region->size) {
+		r = omapfb_realloc_fbmem(fbi, size, ofbi->region->type);
 		if (r) {
 			dev_err(dev, "realloc fbmem failed\n");
 			goto out;
@@ -442,6 +485,9 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
 
 	r = count;
 out:
+	atomic_dec(&rg->lock_count);
+	up_write(&rg->lock);
+
 	unlock_fb_info(fbi);
 
 	return r;
@@ -453,7 +499,7 @@ static ssize_t show_phys(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
+	return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region->paddr);
 }
 
 static ssize_t show_virt(struct device *dev,
@@ -462,7 +508,7 @@ static ssize_t show_virt(struct device *dev,
 	struct fb_info *fbi = dev_get_drvdata(dev);
 	struct omapfb_info *ofbi = FB2OFB(fbi);
 
-	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
+	return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region->vaddr);
 }
 
 static struct device_attribute omapfb_attrs[] = {

drivers/video/omap2/omapfb/omapfb.h

@@ -27,6 +27,8 @@
 #define DEBUG
 #endif
 
+#include <linux/rwsem.h>
+
 #include <plat/display.h>
 
 #ifdef DEBUG
@@ -44,6 +46,7 @@ extern unsigned int omapfb_debug;
 #define OMAPFB_MAX_OVL_PER_FB 3
 
 struct omapfb2_mem_region {
+	int             id;
 	u32		paddr;
 	void __iomem	*vaddr;
 	struct vrfb	vrfb;
@@ -51,13 +54,15 @@ struct omapfb2_mem_region {
 	u8		type;		/* OMAPFB_PLANE_MEM_* */
 	bool		alloc;		/* allocated by the driver */
 	bool		map;		/* kernel mapped by the driver */
+	atomic_t	map_count;
+	struct rw_semaphore lock;
+	atomic_t	lock_count;
 };
 
 /* appended to fb_info */
 struct omapfb_info {
 	int id;
-	struct omapfb2_mem_region region;
-	atomic_t map_count;
+	struct omapfb2_mem_region *region;
 	int num_overlays;
 	struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
 	struct omapfb2_device *fbdev;
@@ -76,6 +81,7 @@ struct omapfb2_device {
 
 	unsigned num_fbs;
 	struct fb_info *fbs[10];
+	struct omapfb2_mem_region regions[10];
 
 	unsigned num_displays;
 	struct omap_dss_device *displays[10];
@@ -117,6 +123,9 @@ int omapfb_update_window(struct fb_info *fbi,
 int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
 			struct fb_var_screeninfo *var);
 
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+		u16 posx, u16 posy, u16 outw, u16 outh);
+
 /* find the display connected to this fb, if any */
 static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
 {
@@ -148,8 +157,24 @@ static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
 	struct omap_overlay_info info;
 
 	ovl->get_overlay_info(ovl, &info);
+	if (info.enabled == enable)
+		return 0;
 	info.enabled = enable;
 	return ovl->set_overlay_info(ovl, &info);
 }
 
+static inline struct omapfb2_mem_region *
+omapfb_get_mem_region(struct omapfb2_mem_region *rg)
+{
+	down_read_nested(&rg->lock, rg->id);
+	atomic_inc(&rg->lock_count);
+	return rg;
+}
+
+static inline void omapfb_put_mem_region(struct omapfb2_mem_region *rg)
+{
+	atomic_dec(&rg->lock_count);
+	up_read(&rg->lock);
+}
+
 #endif

include/linux/omapfb.h

@@ -85,6 +85,9 @@
 #define OMAPFB_MEMTYPE_SRAM		1
 #define OMAPFB_MEMTYPE_MAX		1
 
+#define OMAPFB_MEM_IDX_ENABLED	0x80
+#define OMAPFB_MEM_IDX_MASK	0x7f
+
 enum omapfb_color_format {
 	OMAPFB_COLOR_RGB565 = 0,
 	OMAPFB_COLOR_YUV422,
@@ -136,7 +139,7 @@ struct omapfb_plane_info {
 	__u8  enabled;
 	__u8  channel_out;
 	__u8  mirror;
-	__u8  reserved1;
+	__u8  mem_idx;
 	__u32 out_width;
 	__u32 out_height;
 	__u32 reserved2[12];