Commit 53c1b192 authored by Sergei Shtylyov's avatar Sergei Shtylyov Committed by Ralf Baechle

[MIPS] Au1xx0 code sets incorrect mips_hpt_frequency

Alchemy CPU counter ticks at the full CPU clock speed.
Signed-off-by: default avatarSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent be609f35
......@@ -231,7 +231,6 @@ wakeup_counter0_set(int ticks)
*/
unsigned long cal_r4koff(void)
{
unsigned long count;
unsigned long cpu_speed;
unsigned long flags;
unsigned long counter;
......@@ -258,7 +257,7 @@ unsigned long cal_r4koff(void)
#if defined(CONFIG_AU1000_USE32K)
{
unsigned long start, end;
unsigned long start, end, count;
start = au_readl(SYS_RTCREAD);
start += 2;
......@@ -282,7 +281,6 @@ unsigned long cal_r4koff(void)
#else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) *
AU1000_SRC_CLK;
count = cpu_speed / 2;
#endif
}
else {
......@@ -291,10 +289,9 @@ unsigned long cal_r4koff(void)
* NOTE: some old silicon doesn't allow reading the PLL.
*/
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
count = cpu_speed / 2;
no_au1xxx_32khz = 1;
}
mips_hpt_frequency = count;
mips_hpt_frequency = cpu_speed;
// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment