mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@vger.kernel.org
Fixes: 7a1e3f14 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.plSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-of-at91.c

@@ -132,7 +132,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
 
 	sdhci_reset(host, mask);
 
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	if (priv->cal_always_on && (mask & SDHCI_RESET_ALL))
@@ -427,8 +428,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
 	 * detection procedure using the SDMCC_CD signal is bypassed.
 	 * This bit is reset when a software reset for all command is performed
 	 * so we need to implement our own reset function to set back this bit.
+	 *
+	 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
 	 */
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	pm_runtime_put_autosuspend(&pdev->dev);