Commit 53e07424 authored by Stephen Boyd's avatar Stephen Boyd

Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and...

Merge branches 'clk-actions', 'clk-rockchip', 'clk-iproc', 'clk-intel' and 'clk-debugfs' into clk-next

 - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs

* clk-actions:
  MAINTAINERS: Add reset binding entry for Actions Semi Owl SoCs
  clk: actions: Add Actions S500 SoC Reset Management Unit support
  dt-bindings: reset: Add binding constants for Actions S500 RMU
  clk: actions: Add APB, DMAC, GPIO clock support for Actions S500 SoC
  dt-bindings: clock: Add APB, DMAC, GPIO bindings for Actions S500 SoC
  clk: actions: Fix h_clk for Actions S500 SoC

* clk-rockchip:
  clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
  clk: rockchip: Revert "fix wrong mmc sample phase shift for rk3328"
  clk: rockchip: use separate compatibles for rk3288w-cru
  dt-bindings: clocks: add rk3288w variant compatible
  clk: rockchip: Handle clock tree for rk3288w variant
  clk: rockchip: convert rk3036 pll type to use internal lock status
  clk: rockchip: convert basic pll lock_wait to use regmap_read_poll_timeout
  clk: rockchip: convert rk3399 pll type to use readl_relaxed_poll_timeout

* clk-iproc:
  clk: iproc: round clock rate to the closest

* clk-intel:
  clk: intel: Avoid unnecessary memset by improving code
  clk: intel: Improve locking in the driver
  clk: intel: Use devm_clk_hw_register() instead of clk_hw_register()

* clk-debugfs:
  clk: Add support for enabling/disabling clocks from debugfs
......@@ -4,9 +4,15 @@ The RK3288 clock controller generates and supplies clock to various
controllers within the SoC and also implements a reset controller for SoC
peripherals.
A revision of this SoC is available: rk3288w. The clock tree is a bit
different so another dt-compatible is available. Noticed that it is only
setting the difference but there is no automatic revision detection. This
should be performed by bootloaders.
Required Properties:
- compatible: should be "rockchip,rk3288-cru"
- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
case of this revision of Rockchip rk3288.
- reg: physical base address of the controller and length of memory mapped
region.
- #clock-cells: should be 1.
......
......@@ -1533,6 +1533,7 @@ F: drivers/mmc/host/owl-mmc.c
F: drivers/pinctrl/actions/*
F: drivers/soc/actions/
F: include/dt-bindings/power/owl-*
F: include/dt-bindings/reset/actions,*
F: include/linux/soc/actions/
N: owl
......
......@@ -23,8 +23,10 @@
#include "owl-gate.h"
#include "owl-mux.h"
#include "owl-pll.h"
#include "owl-reset.h"
#include <dt-bindings/clock/actions,s500-cmu.h>
#include <dt-bindings/reset/actions,s500-reset.h>
#define CMU_COREPLL (0x0000)
#define CMU_DEVPLL (0x0004)
......@@ -175,6 +177,8 @@ static OWL_MUX(dev_clk, "dev_clk", dev_clk_mux_p, CMU_DEVPLL, 12, 1, CLK_SET_RAT
static OWL_MUX(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p, CMU_BUSCLK1, 8, 3, CLK_SET_RATE_PARENT);
/* gate clocks */
static OWL_GATE(gpio_clk, "gpio_clk", "apb_clk", CMU_DEVCLKEN0, 18, 0, 0);
static OWL_GATE(dmac_clk, "dmac_clk", "h_clk", CMU_DEVCLKEN0, 1, 0, 0);
static OWL_GATE(spi0_clk, "spi0_clk", "ahb_clk", CMU_DEVCLKEN1, 10, 0, CLK_IGNORE_UNUSED);
static OWL_GATE(spi1_clk, "spi1_clk", "ahb_clk", CMU_DEVCLKEN1, 11, 0, CLK_IGNORE_UNUSED);
static OWL_GATE(spi2_clk, "spi2_clk", "ahb_clk", CMU_DEVCLKEN1, 12, 0, CLK_IGNORE_UNUSED);
......@@ -183,7 +187,8 @@ static OWL_GATE(timer_clk, "timer_clk", "hosc", CMU_DEVCLKEN1, 27, 0, 0);
static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
/* divider clocks */
static OWL_DIVIDER(h_clk, "h_clk", "ahbprevdiv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 12, 2, NULL, 0, 0);
static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
/* factor clocks */
......@@ -428,6 +433,9 @@ static struct owl_clk_common *s500_clks[] = {
&spdif_clk.common,
&nand_clk.common,
&ecc_clk.common,
&apb_clk.common,
&dmac_clk.common,
&gpio_clk.common,
};
static struct clk_hw_onecell_data s500_hw_clks = {
......@@ -484,24 +492,103 @@ static struct clk_hw_onecell_data s500_hw_clks = {
[CLK_SPDIF] = &spdif_clk.common.hw,
[CLK_NAND] = &nand_clk.common.hw,
[CLK_ECC] = &ecc_clk.common.hw,
[CLK_APB] = &apb_clk.common.hw,
[CLK_DMAC] = &dmac_clk.common.hw,
[CLK_GPIO] = &gpio_clk.common.hw,
},
.num = CLK_NR_CLKS,
};
static const struct owl_reset_map s500_resets[] = {
[RESET_DMAC] = { CMU_DEVRST0, BIT(0) },
[RESET_NORIF] = { CMU_DEVRST0, BIT(1) },
[RESET_DDR] = { CMU_DEVRST0, BIT(2) },
[RESET_NANDC] = { CMU_DEVRST0, BIT(3) },
[RESET_SD0] = { CMU_DEVRST0, BIT(4) },
[RESET_SD1] = { CMU_DEVRST0, BIT(5) },
[RESET_PCM1] = { CMU_DEVRST0, BIT(6) },
[RESET_DE] = { CMU_DEVRST0, BIT(7) },
[RESET_LCD] = { CMU_DEVRST0, BIT(8) },
[RESET_SD2] = { CMU_DEVRST0, BIT(9) },
[RESET_DSI] = { CMU_DEVRST0, BIT(10) },
[RESET_CSI] = { CMU_DEVRST0, BIT(11) },
[RESET_BISP] = { CMU_DEVRST0, BIT(12) },
[RESET_KEY] = { CMU_DEVRST0, BIT(14) },
[RESET_GPIO] = { CMU_DEVRST0, BIT(15) },
[RESET_AUDIO] = { CMU_DEVRST0, BIT(17) },
[RESET_PCM0] = { CMU_DEVRST0, BIT(18) },
[RESET_VDE] = { CMU_DEVRST0, BIT(19) },
[RESET_VCE] = { CMU_DEVRST0, BIT(20) },
[RESET_GPU3D] = { CMU_DEVRST0, BIT(22) },
[RESET_NIC301] = { CMU_DEVRST0, BIT(23) },
[RESET_LENS] = { CMU_DEVRST0, BIT(26) },
[RESET_PERIPHRESET] = { CMU_DEVRST0, BIT(27) },
[RESET_USB2_0] = { CMU_DEVRST1, BIT(0) },
[RESET_TVOUT] = { CMU_DEVRST1, BIT(1) },
[RESET_HDMI] = { CMU_DEVRST1, BIT(2) },
[RESET_HDCP2TX] = { CMU_DEVRST1, BIT(3) },
[RESET_UART6] = { CMU_DEVRST1, BIT(4) },
[RESET_UART0] = { CMU_DEVRST1, BIT(5) },
[RESET_UART1] = { CMU_DEVRST1, BIT(6) },
[RESET_UART2] = { CMU_DEVRST1, BIT(7) },
[RESET_SPI0] = { CMU_DEVRST1, BIT(8) },
[RESET_SPI1] = { CMU_DEVRST1, BIT(9) },
[RESET_SPI2] = { CMU_DEVRST1, BIT(10) },
[RESET_SPI3] = { CMU_DEVRST1, BIT(11) },
[RESET_I2C0] = { CMU_DEVRST1, BIT(12) },
[RESET_I2C1] = { CMU_DEVRST1, BIT(13) },
[RESET_USB3] = { CMU_DEVRST1, BIT(14) },
[RESET_UART3] = { CMU_DEVRST1, BIT(15) },
[RESET_UART4] = { CMU_DEVRST1, BIT(16) },
[RESET_UART5] = { CMU_DEVRST1, BIT(17) },
[RESET_I2C2] = { CMU_DEVRST1, BIT(18) },
[RESET_I2C3] = { CMU_DEVRST1, BIT(19) },
[RESET_ETHERNET] = { CMU_DEVRST1, BIT(20) },
[RESET_CHIPID] = { CMU_DEVRST1, BIT(21) },
[RESET_USB2_1] = { CMU_DEVRST1, BIT(22) },
[RESET_WD0RESET] = { CMU_DEVRST1, BIT(24) },
[RESET_WD1RESET] = { CMU_DEVRST1, BIT(25) },
[RESET_WD2RESET] = { CMU_DEVRST1, BIT(26) },
[RESET_WD3RESET] = { CMU_DEVRST1, BIT(27) },
[RESET_DBG0RESET] = { CMU_DEVRST1, BIT(28) },
[RESET_DBG1RESET] = { CMU_DEVRST1, BIT(29) },
[RESET_DBG2RESET] = { CMU_DEVRST1, BIT(30) },
[RESET_DBG3RESET] = { CMU_DEVRST1, BIT(31) },
};
static struct owl_clk_desc s500_clk_desc = {
.clks = s500_clks,
.num_clks = ARRAY_SIZE(s500_clks),
.hw_clks = &s500_hw_clks,
.resets = s500_resets,
.num_resets = ARRAY_SIZE(s500_resets),
};
static int s500_clk_probe(struct platform_device *pdev)
{
struct owl_clk_desc *desc;
struct owl_reset *reset;
int ret;
desc = &s500_clk_desc;
owl_clk_regmap_init(pdev, desc);
reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
if (!reset)
return -ENOMEM;
reset->rcdev.of_node = pdev->dev.of_node;
reset->rcdev.ops = &owl_reset_ops;
reset->rcdev.nr_resets = desc->num_resets;
reset->reset_map = desc->resets;
reset->regmap = desc->regmap;
ret = devm_reset_controller_register(&pdev->dev, &reset->rcdev);
if (ret)
dev_err(&pdev->dev, "Failed to register reset controller\n");
return owl_clk_probe(&pdev->dev, desc->hw_clks);
}
......
......@@ -119,7 +119,7 @@ static long iproc_asiu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
if (rate == *parent_rate)
return *parent_rate;
div = DIV_ROUND_UP(*parent_rate, rate);
div = DIV_ROUND_CLOSEST(*parent_rate, rate);
if (div < 2)
return *parent_rate;
......@@ -145,7 +145,7 @@ static int iproc_asiu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
return 0;
}
div = DIV_ROUND_UP(parent_rate, rate);
div = DIV_ROUND_CLOSEST(parent_rate, rate);
if (div < 2)
return -EINVAL;
......
......@@ -3054,6 +3054,31 @@ static int clk_rate_set(void *data, u64 val)
}
#define clk_rate_mode 0644
static int clk_prepare_enable_set(void *data, u64 val)
{
struct clk_core *core = data;
int ret = 0;
if (val)
ret = clk_prepare_enable(core->hw->clk);
else
clk_disable_unprepare(core->hw->clk);
return ret;
}
static int clk_prepare_enable_get(void *data, u64 *val)
{
struct clk_core *core = data;
*val = core->enable_count && core->prepare_count;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(clk_prepare_enable_fops, clk_prepare_enable_get,
clk_prepare_enable_set, "%llu\n");
#else
#define clk_rate_set NULL
#define clk_rate_mode 0444
......@@ -3231,6 +3256,10 @@ static void clk_debug_create_one(struct clk_core *core, struct dentry *pdentry)
debugfs_create_u32("clk_notifier_count", 0444, root, &core->notifier_count);
debugfs_create_file("clk_duty_cycle", 0444, root, core,
&clk_duty_cycle_fops);
#ifdef CLOCK_ALLOW_WRITE_DEBUGFS
debugfs_create_file("clk_prepare_enable", 0644, root, core,
&clk_prepare_enable_fops);
#endif
if (core->num_parents > 0)
debugfs_create_file("clk_parent", 0444, root, core,
......
......@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/clk-provider.h>
#include <linux/iopoll.h>
#include <linux/regmap.h>
#include <linux/clk.h>
#include "clk.h"
......@@ -86,23 +87,14 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
{
struct regmap *grf = pll->ctx->grf;
unsigned int val;
int delay = 24000000, ret;
while (delay > 0) {
ret = regmap_read(grf, pll->lock_offset, &val);
if (ret) {
pr_err("%s: failed to read pll lock status: %d\n",
__func__, ret);
return ret;
}
int ret;
if (val & BIT(pll->lock_shift))
return 0;
delay--;
}
ret = regmap_read_poll_timeout(grf, pll->lock_offset, val,
val & BIT(pll->lock_shift), 0, 1000);
if (ret)
pr_err("%s: timeout waiting for pll to lock\n", __func__);
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return -ETIMEDOUT;
return ret;
}
/**
......@@ -118,12 +110,31 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll *pll)
#define RK3036_PLLCON1_REFDIV_SHIFT 0
#define RK3036_PLLCON1_POSTDIV2_MASK 0x7
#define RK3036_PLLCON1_POSTDIV2_SHIFT 6
#define RK3036_PLLCON1_LOCK_STATUS BIT(10)
#define RK3036_PLLCON1_DSMPD_MASK 0x1
#define RK3036_PLLCON1_DSMPD_SHIFT 12
#define RK3036_PLLCON1_PWRDOWN BIT(13)
#define RK3036_PLLCON2_FRAC_MASK 0xffffff
#define RK3036_PLLCON2_FRAC_SHIFT 0
#define RK3036_PLLCON1_PWRDOWN (1 << 13)
static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
{
u32 pllcon;
int ret;
/*
* Lock time typical 250, max 500 input clock cycles @24MHz
* So define a very safe maximum of 1000us, meaning 24000 cycles.
*/
ret = readl_relaxed_poll_timeout(pll->reg_base + RK3036_PLLCON(1),
pllcon,
pllcon & RK3036_PLLCON1_LOCK_STATUS,
0, 1000);
if (ret)
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return ret;
}
static void rockchip_rk3036_pll_get_params(struct rockchip_clk_pll *pll,
struct rockchip_pll_rate_table *rate)
......@@ -221,7 +232,7 @@ static int rockchip_rk3036_pll_set_params(struct rockchip_clk_pll *pll,
writel_relaxed(pllcon, pll->reg_base + RK3036_PLLCON(2));
/* wait for the pll to lock */
ret = rockchip_pll_wait_lock(pll);
ret = rockchip_rk3036_pll_wait_lock(pll);
if (ret) {
pr_warn("%s: pll update unsuccessful, trying to restore old params\n",
__func__);
......@@ -260,7 +271,7 @@ static int rockchip_rk3036_pll_enable(struct clk_hw *hw)
writel(HIWORD_UPDATE(0, RK3036_PLLCON1_PWRDOWN, 0),
pll->reg_base + RK3036_PLLCON(1));
rockchip_pll_wait_lock(pll);
rockchip_rk3036_pll_wait_lock(pll);
return 0;
}
......@@ -589,19 +600,20 @@ static const struct clk_ops rockchip_rk3066_pll_clk_ops = {
static int rockchip_rk3399_pll_wait_lock(struct rockchip_clk_pll *pll)
{
u32 pllcon;
int delay = 24000000;
/* poll check the lock status in rk3399 xPLLCON2 */
while (delay > 0) {
pllcon = readl_relaxed(pll->reg_base + RK3399_PLLCON(2));
if (pllcon & RK3399_PLLCON2_LOCK_STATUS)
return 0;
int ret;
delay--;
}
/*
* Lock time typical 250, max 500 input clock cycles @24MHz
* So define a very safe maximum of 1000us, meaning 24000 cycles.
*/
ret = readl_relaxed_poll_timeout(pll->reg_base + RK3399_PLLCON(2),
pllcon,
pllcon & RK3399_PLLCON2_LOCK_STATUS,
0, 1000);
if (ret)
pr_err("%s: timeout waiting for pll to lock\n", __func__);
pr_err("%s: timeout waiting for pll to lock\n", __func__);
return -ETIMEDOUT;
return ret;
}
static void rockchip_rk3399_pll_get_params(struct rockchip_clk_pll *pll,
......
......@@ -751,6 +751,7 @@ static const char *const rk3188_critical_clocks[] __initconst = {
"pclk_peri",
"hclk_cpubus",
"hclk_vio_bus",
"sclk_mac_lbtest",
};
static struct rockchip_clk_provider *__init rk3188_common_clk_init(struct device_node *np)
......
......@@ -15,6 +15,11 @@
#define RK3288_GRF_SOC_CON(x) (0x244 + x * 4)
#define RK3288_GRF_SOC_STATUS1 0x284
enum rk3288_variant {
RK3288_CRU,
RK3288W_CRU,
};
enum rk3288_plls {
apll, dpll, cpll, gpll, npll,
};
......@@ -425,8 +430,6 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
COMPOSITE(0, "aclk_vio0", mux_pll_src_cpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
RK3288_CLKSEL_CON(31), 6, 2, MFLAGS, 0, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 0, GFLAGS),
DIV(0, "hclk_vio", "aclk_vio0", 0,
RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
COMPOSITE(0, "aclk_vio1", mux_pll_src_cpll_gpll_usb480m_p, CLK_IGNORE_UNUSED,
RK3288_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
RK3288_CLKGATE_CON(3), 2, GFLAGS),
......@@ -819,6 +822,16 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
INVERTER(0, "pclk_isp", "pclk_isp_in", RK3288_CLKSEL_CON(29), 3, IFLAGS),
};
static struct rockchip_clk_branch rk3288w_hclkvio_branch[] __initdata = {
DIV(0, "hclk_vio", "aclk_vio1", 0,
RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
};
static struct rockchip_clk_branch rk3288_hclkvio_branch[] __initdata = {
DIV(0, "hclk_vio", "aclk_vio0", 0,
RK3288_CLKSEL_CON(28), 8, 5, DFLAGS),
};
static const char *const rk3288_critical_clocks[] __initconst = {
"aclk_cpu",
"aclk_peri",
......@@ -914,7 +927,8 @@ static struct syscore_ops rk3288_clk_syscore_ops = {
.resume = rk3288_clk_resume,
};
static void __init rk3288_clk_init(struct device_node *np)
static void __init rk3288_common_init(struct device_node *np,
enum rk3288_variant soc)
{
struct rockchip_clk_provider *ctx;
......@@ -936,6 +950,14 @@ static void __init rk3288_clk_init(struct device_node *np)
RK3288_GRF_SOC_STATUS1);
rockchip_clk_register_branches(ctx, rk3288_clk_branches,
ARRAY_SIZE(rk3288_clk_branches));
if (soc == RK3288W_CRU)
rockchip_clk_register_branches(ctx, rk3288w_hclkvio_branch,
ARRAY_SIZE(rk3288w_hclkvio_branch));
else
rockchip_clk_register_branches(ctx, rk3288_hclkvio_branch,
ARRAY_SIZE(rk3288_hclkvio_branch));
rockchip_clk_protect_critical(rk3288_critical_clocks,
ARRAY_SIZE(rk3288_critical_clocks));
......@@ -954,4 +976,15 @@ static void __init rk3288_clk_init(struct device_node *np)
rockchip_clk_of_add_provider(np, ctx);
}
static void __init rk3288_clk_init(struct device_node *np)
{
rk3288_common_init(np, RK3288_CRU);
}
CLK_OF_DECLARE(rk3288_cru, "rockchip,rk3288-cru", rk3288_clk_init);
static void __init rk3288w_clk_init(struct device_node *np)
{
rk3288_common_init(np, RK3288W_CRU);
}
CLK_OF_DECLARE(rk3288w_cru, "rockchip,rk3288w-cru", rk3288w_clk_init);
......@@ -808,22 +808,22 @@ static struct rockchip_clk_branch rk3328_clk_branches[] __initdata = {
MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc",
RK3328_SDMMC_CON0, 1),
MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc",
RK3328_SDMMC_CON1, 0),
RK3328_SDMMC_CON1, 1),
MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio",
RK3328_SDIO_CON0, 1),
MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio",
RK3328_SDIO_CON1, 0),
RK3328_SDIO_CON1, 1),
MMC(SCLK_EMMC_DRV, "emmc_drv", "clk_emmc",
RK3328_EMMC_CON0, 1),
MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "clk_emmc",
RK3328_EMMC_CON1, 0),
RK3328_EMMC_CON1, 1),
MMC(SCLK_SDMMC_EXT_DRV, "sdmmc_ext_drv", "clk_sdmmc_ext",
RK3328_SDMMC_EXT_CON0, 1),
MMC(SCLK_SDMMC_EXT_SAMPLE, "sdmmc_ext_sample", "clk_sdmmc_ext",
RK3328_SDMMC_EXT_CON1, 0),
RK3328_SDMMC_EXT_CON1, 1),
};
static const char *const rk3328_critical_clocks[] __initconst = {
......
......@@ -128,7 +128,7 @@ lgm_clk_register_pll(struct lgm_clk_provider *ctx,
pll->hw.init = &init;
hw = &pll->hw;
ret = clk_hw_register(dev, hw);
ret = devm_clk_hw_register(dev, hw);
if (ret)
return ERR_PTR(ret);
......
......@@ -119,7 +119,7 @@ lgm_clk_register_mux(struct lgm_clk_provider *ctx,
mux->hw.init = &init;
hw = &mux->hw;
ret = clk_hw_register(dev, hw);
ret = devm_clk_hw_register(dev, hw);
if (ret)
return ERR_PTR(ret);
......@@ -247,7 +247,7 @@ lgm_clk_register_divider(struct lgm_clk_provider *ctx,
div->hw.init = &init;
hw = &div->hw;
ret = clk_hw_register(dev, hw);
ret = devm_clk_hw_register(dev, hw);
if (ret)
return ERR_PTR(ret);
......@@ -361,7 +361,7 @@ lgm_clk_register_gate(struct lgm_clk_provider *ctx,
gate->hw.init = &init;
hw = &gate->hw;
ret = clk_hw_register(dev, hw);
ret = devm_clk_hw_register(dev, hw);
if (ret)
return ERR_PTR(ret);
......@@ -420,18 +420,14 @@ lgm_clk_ddiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
{
struct lgm_clk_ddiv *ddiv = to_lgm_clk_ddiv(hw);
unsigned int div0, div1, exdiv;
unsigned long flags;
u64 prate;
spin_lock_irqsave(&ddiv->lock, flags);
div0 = lgm_get_clk_val(ddiv->membase, ddiv->reg,
ddiv->shift0, ddiv->width0) + 1;
div1 = lgm_get_clk_val(ddiv->membase, ddiv->reg,
ddiv->shift1, ddiv->width1) + 1;
exdiv = lgm_get_clk_val(ddiv->membase, ddiv->reg,
ddiv->shift2, ddiv->width2);
spin_unlock_irqrestore(&ddiv->lock, flags);
prate = (u64)parent_rate;
do_div(prate, div0);
do_div(prate, div1);
......@@ -548,24 +544,21 @@ lgm_clk_ddiv_round_rate(struct clk_hw *hw, unsigned long rate,
div = div * 2;
div = DIV_ROUND_CLOSEST_ULL((u64)div, 5);
}
spin_unlock_irqrestore(&ddiv->lock, flags);
if (div <= 0) {
spin_unlock_irqrestore(&ddiv->lock, flags);
if (div <= 0)
return *prate;
}
if (lgm_clk_get_ddiv_val(div, &ddiv1, &ddiv2) != 0) {
if (lgm_clk_get_ddiv_val(div + 1, &ddiv1, &ddiv2) != 0) {
spin_unlock_irqrestore(&ddiv->lock, flags);
if (lgm_clk_get_ddiv_val(div, &ddiv1, &ddiv2) != 0)
if (lgm_clk_get_ddiv_val(div + 1, &ddiv1, &ddiv2) != 0)
return -EINVAL;
}
}
rate64 = *prate;
do_div(rate64, ddiv1);
do_div(rate64, ddiv2);
/* if predivide bit is enabled, modify rounded rate by factor of 2.5 */
spin_lock_irqsave(&ddiv->lock, flags);
if (lgm_get_clk_val(ddiv->membase, ddiv->reg, ddiv->shift2, 1)) {
rate64 = rate64 * 2;
rate64 = DIV_ROUND_CLOSEST_ULL(rate64, 5);
......@@ -588,19 +581,18 @@ int lgm_clk_register_ddiv(struct lgm_clk_provider *ctx,
unsigned int nr_clk)
{
struct device *dev = ctx->dev;
struct clk_init_data init = {};
struct lgm_clk_ddiv *ddiv;
struct clk_hw *hw;
unsigned int idx;
int ret;
for (idx = 0; idx < nr_clk; idx++, list++) {
ddiv = NULL;
struct clk_init_data init = {};
struct lgm_clk_ddiv *ddiv;
ddiv = devm_kzalloc(dev, sizeof(*ddiv), GFP_KERNEL);
if (!ddiv)
return -ENOMEM;
memset(&init, 0, sizeof(init));
init.name = list->name;
init.ops = &lgm_clk_ddiv_ops;
init.flags = list->flags;
......@@ -624,7 +616,7 @@ int lgm_clk_register_ddiv(struct lgm_clk_provider *ctx,
ddiv->hw.init = &init;
hw = &ddiv->hw;
ret = clk_hw_register(dev, hw);
ret = devm_clk_hw_register(dev, hw);
if (ret) {
dev_err(dev, "register clk: %s failed!\n", list->name);
return ret;
......
......@@ -72,7 +72,12 @@
#define CLK_NAND 52
#define CLK_ECC 53
#define CLK_RMII_REF 54
#define CLK_GPIO 55
#define CLK_NR_CLKS (CLK_RMII_REF + 1)
/* system clock (part 2) */
#define CLK_APB 56
#define CLK_DMAC 57
#define CLK_NR_CLKS (CLK_DMAC + 1)
#endif /* __DT_BINDINGS_CLOCK_S500_CMU_H */
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Device Tree binding constants for Actions Semi S500 Reset Management Unit
*
* Copyright (c) 2014 Actions Semi Inc.
* Copyright (c) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
*/
#ifndef __DT_BINDINGS_ACTIONS_S500_RESET_H
#define __DT_BINDINGS_ACTIONS_S500_RESET_H
#define RESET_DMAC 0
#define RESET_NORIF 1
#define RESET_DDR 2
#define RESET_NANDC 3
#define RESET_SD0 4
#define RESET_SD1 5
#define RESET_PCM1 6
#define RESET_DE 7
#define RESET_LCD 8
#define RESET_SD2 9
#define RESET_DSI 10
#define RESET_CSI 11
#define RESET_BISP 12
#define RESET_KEY 13
#define RESET_GPIO 14
#define RESET_AUDIO 15
#define RESET_PCM0 16
#define RESET_VDE 17
#define RESET_VCE 18
#define RESET_GPU3D 19
#define RESET_NIC301 20
#define RESET_LENS 21
#define RESET_PERIPHRESET 22
#define RESET_USB2_0 23
#define RESET_TVOUT 24
#define RESET_HDMI 25
#define RESET_HDCP2TX 26
#define RESET_UART6 27
#define RESET_UART0 28
#define RESET_UART1 29
#define RESET_UART2 30
#define RESET_SPI0 31
#define RESET_SPI1 32
#define RESET_SPI2 33
#define RESET_SPI3 34
#define RESET_I2C0 35
#define RESET_I2C1 36
#define RESET_USB3 37
#define RESET_UART3 38
#define RESET_UART4 39
#define RESET_UART5 40
#define RESET_I2C2 41
#define RESET_I2C3 42
#define RESET_ETHERNET 43
#define RESET_CHIPID 44
#define RESET_USB2_1 45
#define RESET_WD0RESET 46
#define RESET_WD1RESET 47
#define RESET_WD2RESET 48
#define RESET_WD3RESET 49
#define RESET_DBG0RESET 50
#define RESET_DBG1RESET 51
#define RESET_DBG2RESET 52
#define RESET_DBG3RESET 53
#endif /* __DT_BINDINGS_ACTIONS_S500_RESET_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment