Commit 54188054 authored by Mike Looijmans's avatar Mike Looijmans Committed by Jonathan Cameron

iio: adc: Add TI ADS1100 and ADS1000

The ADS1100 is a 16-bit ADC (at 8 samples per second).
The ADS1000 is similar, but has a fixed data rate.
Signed-off-by: default avatarMike Looijmans <mike.looijmans@topic.nl>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230307065535.7927-2-mike.looijmans@topic.nlSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent f8c64b14
...@@ -1229,6 +1229,16 @@ config TI_ADS7924 ...@@ -1229,6 +1229,16 @@ config TI_ADS7924
This driver can also be built as a module. If so, the module will be This driver can also be built as a module. If so, the module will be
called ti-ads7924. called ti-ads7924.
config TI_ADS1100
tristate "Texas Instruments ADS1100 and ADS1000 ADC"
depends on I2C
help
If you say yes here you get support for Texas Instruments ADS1100 and
ADS1000 ADC chips.
This driver can also be built as a module. If so, the module will be
called ti-ads1100.
config TI_ADS7950 config TI_ADS7950
tristate "Texas Instruments ADS7950 ADC driver" tristate "Texas Instruments ADS7950 ADC driver"
depends on SPI && GPIOLIB depends on SPI && GPIOLIB
......
...@@ -108,6 +108,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o ...@@ -108,6 +108,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o
obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o
obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment