hardirq: Make hardirq bits generic

There is no reason for per arch hardirq bits. Make them all generic
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183628.534494408@linutronix.de

arch/blackfin/include/asm/hardirq.h

@@ -12,9 +12,6 @@
 extern void ack_bad_irq(unsigned int irq);
 #define ack_bad_irq ack_bad_irq
 
-/* Define until common code gets sane defaults */
-#define HARDIRQ_BITS 9
-
 #include <asm-generic/hardirq.h>
 
 #endif

arch/cris/include/asm/hardirq.h

@@ -2,18 +2,6 @@
 #define __ASM_HARDIRQ_H
 
 #include <asm/irq.h>
-
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #include <asm-generic/hardirq.h>
 
 #endif /* __ASM_HARDIRQ_H */

arch/m32r/include/asm/hardirq.h

@@ -3,22 +3,6 @@
 #define __ASM_HARDIRQ_H
 
 #include <asm/irq.h>
-
-#if NR_IRQS > 256
-#define HARDIRQ_BITS	9
-#else
-#define HARDIRQ_BITS	8
-#endif
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #include <asm-generic/hardirq.h>
 
 #endif /* __ASM_HARDIRQ_H */

arch/m68k/include/asm/hardirq.h

@@ -5,17 +5,6 @@
 #include <linux/cache.h>
 #include <asm/irq.h>
 
-#define HARDIRQ_BITS	8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
 #ifdef CONFIG_MMU
 
 static inline void ack_bad_irq(unsigned int irq)

arch/s390/include/asm/hardirq.h

@@ -18,8 +18,6 @@
 #define __ARCH_HAS_DO_SOFTIRQ
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED
 
-#define HARDIRQ_BITS	8
-
 static inline void ack_bad_irq(unsigned int irq)
 {
 	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);

arch/sparc/include/asm/hardirq_32.h

@@ -7,7 +7,6 @@
 #ifndef __SPARC_HARDIRQ_H
 #define __SPARC_HARDIRQ_H
 
-#define HARDIRQ_BITS    8
 #include <asm-generic/hardirq.h>
 
 #endif /* __SPARC_HARDIRQ_H */

arch/sparc/include/asm/hardirq_64.h

@@ -14,6 +14,4 @@
 
 void ack_bad_irq(unsigned int irq);
 
-#define HARDIRQ_BITS	8
-
 #endif /* !(__SPARC64_HARDIRQ_H) */

arch/tile/include/asm/hardirq.h

@@ -42,6 +42,4 @@ DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
 
 #include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
 
-#define HARDIRQ_BITS	8
-
 #endif /* _ASM_TILE_HARDIRQ_H */

include/linux/preempt_mask.h

@@ -11,36 +11,22 @@
  * - bits 0-7 are the preemption count (max preemption depth: 256)
  * - bits 8-15 are the softirq count (max # of softirqs: 256)
  *
- * The hardirq count can in theory reach the same as NR_IRQS.
- * In reality, the number of nested IRQS is limited to the stack
- * size as well. For archs with over 1000 IRQS it is not practical
- * to expect that they will all nest. We give a max of 10 bits for
- * hardirq nesting. An arch may choose to give less than 10 bits.
- * m68k expects it to be 8.
- *
- * - bits 16-25 are the hardirq count (max # of nested hardirqs: 1024)
- * - bit 26 is the NMI_MASK
- * - bit 27 is the PREEMPT_ACTIVE flag
+ * The hardirq count could in theory be the same as the number of
+ * interrupts in the system, but we run all interrupt handlers with
+ * interrupts disabled, so we cannot have nesting interrupts. Though
+ * there are a few palaeontologic drivers which reenable interrupts in
+ * the handler, so we need more than one bit here.
  *
  * PREEMPT_MASK: 0x000000ff
  * SOFTIRQ_MASK: 0x0000ff00
- * HARDIRQ_MASK: 0x03ff0000
- *     NMI_MASK: 0x04000000
+ * HARDIRQ_MASK: 0x000f0000
+ *     NMI_MASK: 0x00100000
  */
 #define PREEMPT_BITS	8
 #define SOFTIRQ_BITS	8
+#define HARDIRQ_BITS	4
 #define NMI_BITS	1
 
-#define MAX_HARDIRQ_BITS 10
-
-#ifndef HARDIRQ_BITS
-# define HARDIRQ_BITS	MAX_HARDIRQ_BITS
-#endif
-
-#if HARDIRQ_BITS > MAX_HARDIRQ_BITS
-#error HARDIRQ_BITS too high!
-#endif
-
 #define PREEMPT_SHIFT	0
 #define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
 #define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)