i2c: at91: Move to generic GPIO bus recovery

Make the Microchip at91 driver the first to use the generic GPIO bus
recovery support from the I2C core and discard the driver implementation.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-at91-master.c

@@ -816,79 +816,16 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 	return ret;
 }
 
-static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
-{
-	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
-	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-}
-
-static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
-{
-	struct at91_twi_dev *dev = i2c_get_adapdata(adap);
-
-	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-}
-
 static int at91_init_twi_recovery_gpio(struct platform_device *pdev,
 				       struct at91_twi_dev *dev)
 {
 	struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
 
-	dev->pinctrl = devm_pinctrl_get(&pdev->dev);
-	if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
+	rinfo->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (!rinfo->pinctrl || IS_ERR(rinfo->pinctrl)) {
 		dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
-		return PTR_ERR(dev->pinctrl);
+		return PTR_ERR(rinfo->pinctrl);
 	}
-
-	dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
-							 PINCTRL_STATE_DEFAULT);
-	dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
-						      "gpio");
-	if (IS_ERR(dev->pinctrl_pins_default) ||
-	    IS_ERR(dev->pinctrl_pins_gpio)) {
-		dev_info(&pdev->dev, "pinctrl states incomplete for recovery\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * pins will be taken as GPIO, so we might as well inform pinctrl about
-	 * this and move the state to GPIO
-	 */
-	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
-
-	rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
-	if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
-					  GPIOD_OUT_HIGH_OPEN_DRAIN);
-	if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
-		return -EPROBE_DEFER;
-
-	if (IS_ERR(rinfo->sda_gpiod) ||
-	    IS_ERR(rinfo->scl_gpiod)) {
-		dev_info(&pdev->dev, "recovery information incomplete\n");
-		if (!IS_ERR(rinfo->sda_gpiod)) {
-			gpiod_put(rinfo->sda_gpiod);
-			rinfo->sda_gpiod = NULL;
-		}
-		if (!IS_ERR(rinfo->scl_gpiod)) {
-			gpiod_put(rinfo->scl_gpiod);
-			rinfo->scl_gpiod = NULL;
-		}
-		pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-		return -EINVAL;
-	}
-
-	/* change the state of the pins back to their default state */
-	pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
-
-	dev_info(&pdev->dev, "using scl, sda for recovery\n");
-
-	rinfo->prepare_recovery = at91_prepare_twi_recovery;
-	rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
-	rinfo->recover_bus = i2c_generic_scl_recovery;
 	dev->adapter.bus_recovery_info = rinfo;
 
 	return 0;

drivers/i2c/busses/i2c-at91.h

@@ -157,9 +157,6 @@ struct at91_twi_dev {
 	struct at91_twi_dma dma;
 	bool slave_detected;
 	struct i2c_bus_recovery_info rinfo;
-	struct pinctrl *pinctrl;
-	struct pinctrl_state *pinctrl_pins_default;
-	struct pinctrl_state *pinctrl_pins_gpio;
 #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
 	unsigned smr;
 	struct i2c_client *slave;