Commit 54426328 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson

arm64: dts: qcom: sdm630: Use lowercase hex

Use lowercase hex, as that's the preferred and overwhermingly present
style.
Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221212111037.98160-5-konrad.dybcio@linaro.org
parent d6882340
......@@ -678,7 +678,7 @@ a2noc: interconnect@1704000 {
mnoc: interconnect@1745000 {
compatible = "qcom,sdm660-mnoc";
reg = <0x01745000 0xA010>;
reg = <0x01745000 0xa010>;
#interconnect-cells = <1>;
clock-names = "bus", "bus_a", "iface";
clocks = <&rpmcc RPM_SMD_MMSSNOC_AXI_CLK>,
......@@ -1044,43 +1044,43 @@ opp-775000000 {
opp-hz = /bits/ 64 <775000000>;
opp-level = <RPM_SMD_LEVEL_TURBO>;
opp-peak-kBps = <5412000>;
opp-supported-hw = <0xA2>;
opp-supported-hw = <0xa2>;
};
opp-647000000 {
opp-hz = /bits/ 64 <647000000>;
opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
opp-peak-kBps = <4068000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
opp-588000000 {
opp-hz = /bits/ 64 <588000000>;
opp-level = <RPM_SMD_LEVEL_NOM>;
opp-peak-kBps = <3072000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
opp-465000000 {
opp-hz = /bits/ 64 <465000000>;
opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
opp-peak-kBps = <2724000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
opp-370000000 {
opp-hz = /bits/ 64 <370000000>;
opp-level = <RPM_SMD_LEVEL_SVS>;
opp-peak-kBps = <2188000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
opp-240000000 {
opp-hz = /bits/ 64 <240000000>;
opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
opp-peak-kBps = <1648000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
opp-160000000 {
opp-hz = /bits/ 64 <160000000>;
opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
opp-peak-kBps = <1200000>;
opp-supported-hw = <0xFF>;
opp-supported-hw = <0xff>;
};
};
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment