Commit 544d8b96 authored by Jonathan Marek's avatar Jonathan Marek Committed by Rob Clark

drm/msm/dpu: update UBWC config for sm8150 and sm8250

Update the UBWC registers to the right values for sm8150 and sm8250.

This removes broken dpu_hw_reset_ubwc, which doesn't work because the
"force blk offset to zero to access beginning of register region" hack is
copied from downstream, where mapped region starts 0x1000 below what is
used in the upstream driver.

Also simplifies the overly complicated change that was introduced in
e4f9bbe9 to work around dpu_hw_reset_ubwc being broken.
Signed-off-by: default avatarJonathan Marek <jonathan@marek.ca>
Signed-off-by: default avatarRob Clark <robdclark@chromium.org>
parent de321dcc
......@@ -1088,7 +1088,6 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
{
struct dpu_encoder_virt *dpu_enc = NULL;
struct msm_drm_private *priv;
struct dpu_kms *dpu_kms;
int i;
if (!drm_enc || !drm_enc->dev) {
......@@ -1097,7 +1096,6 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
}
priv = drm_enc->dev->dev_private;
dpu_kms = to_dpu_kms(priv->kms);
dpu_enc = to_dpu_encoder_virt(drm_enc);
if (!dpu_enc || !dpu_enc->cur_master) {
......@@ -1105,12 +1103,6 @@ static void _dpu_encoder_virt_enable_helper(struct drm_encoder *drm_enc)
return;
}
if (dpu_enc->cur_master->hw_mdptop &&
dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc)
dpu_enc->cur_master->hw_mdptop->ops.reset_ubwc(
dpu_enc->cur_master->hw_mdptop,
dpu_kms->catalog);
_dpu_encoder_update_vsync_source(dpu_enc, &dpu_enc->disp_info);
if (dpu_enc->disp_info.intf_type == DRM_MODE_ENCODER_DSI &&
......
......@@ -37,7 +37,9 @@
#define DPU_HW_VER_400 DPU_HW_VER(4, 0, 0) /* sdm845 v1.0 */
#define DPU_HW_VER_401 DPU_HW_VER(4, 0, 1) /* sdm845 v2.0 */
#define DPU_HW_VER_410 DPU_HW_VER(4, 1, 0) /* sdm670 v1.0 */
#define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sdm855 v1.0 */
#define DPU_HW_VER_500 DPU_HW_VER(5, 0, 0) /* sm8150 v1.0 */
#define DPU_HW_VER_501 DPU_HW_VER(5, 0, 1) /* sm8150 v2.0 */
#define DPU_HW_VER_600 DPU_HW_VER(6, 0, 0) /* sm8250 */
#define DPU_HW_VER_620 DPU_HW_VER(6, 2, 0) /* sc7180 v1.0 */
......@@ -65,10 +67,9 @@ enum {
DPU_HW_UBWC_VER_10 = 0x100,
DPU_HW_UBWC_VER_20 = 0x200,
DPU_HW_UBWC_VER_30 = 0x300,
DPU_HW_UBWC_VER_40 = 0x400,
};
#define IS_UBWC_20_SUPPORTED(rev) ((rev) >= DPU_HW_UBWC_VER_20)
/**
* MDP TOP BLOCK features
* @DPU_MDP_PANIC_PER_PIPE Panic configuration needs to be be done per pipe
......@@ -447,7 +448,6 @@ struct dpu_clk_ctrl_reg {
struct dpu_mdp_cfg {
DPU_HW_BLK_INFO;
u32 highest_bank_bit;
u32 ubwc_static;
u32 ubwc_swizzle;
struct dpu_clk_ctrl_reg clk_ctrls[DPU_CLK_CTRL_MAX];
};
......
......@@ -303,11 +303,25 @@ static void dpu_hw_sspp_setup_format(struct dpu_hw_pipe *ctx,
DPU_REG_WRITE(c, SSPP_FETCH_CONFIG,
DPU_FETCH_CONFIG_RESET_VALUE |
ctx->mdp->highest_bank_bit << 18);
if (IS_UBWC_20_SUPPORTED(ctx->catalog->caps->ubwc_version)) {
switch (ctx->catalog->caps->ubwc_version) {
case DPU_HW_UBWC_VER_10:
/* TODO: UBWC v1 case */
break;
case DPU_HW_UBWC_VER_20:
fast_clear = fmt->alpha_enable ? BIT(31) : 0;
DPU_REG_WRITE(c, SSPP_UBWC_STATIC_CTRL,
fast_clear | (ctx->mdp->ubwc_swizzle) |
(ctx->mdp->highest_bank_bit << 4));
break;
case DPU_HW_UBWC_VER_30:
DPU_REG_WRITE(c, SSPP_UBWC_STATIC_CTRL,
BIT(30) | (ctx->mdp->ubwc_swizzle) |
(ctx->mdp->highest_bank_bit << 4));
break;
case DPU_HW_UBWC_VER_40:
DPU_REG_WRITE(c, SSPP_UBWC_STATIC_CTRL,
DPU_FORMAT_IS_YUV(fmt) ? 0 : BIT(30));
break;
}
}
......
......@@ -8,7 +8,6 @@
#include "dpu_kms.h"
#define SSPP_SPARE 0x28
#define UBWC_STATIC 0x144
#define FLD_SPLIT_DISPLAY_CMD BIT(1)
#define FLD_SMART_PANEL_FREE_RUN BIT(2)
......@@ -249,22 +248,6 @@ static void dpu_hw_get_safe_status(struct dpu_hw_mdp *mdp,
status->sspp[SSPP_CURSOR1] = (value >> 26) & 0x1;
}
static void dpu_hw_reset_ubwc(struct dpu_hw_mdp *mdp, struct dpu_mdss_cfg *m)
{
struct dpu_hw_blk_reg_map c;
if (!mdp || !m)
return;
if (!IS_UBWC_20_SUPPORTED(m->caps->ubwc_version))
return;
/* force blk offset to zero to access beginning of register region */
c = mdp->hw;
c.blk_off = 0x0;
DPU_REG_WRITE(&c, UBWC_STATIC, m->mdp[0].ubwc_static);
}
static void dpu_hw_intf_audio_select(struct dpu_hw_mdp *mdp)
{
struct dpu_hw_blk_reg_map *c;
......@@ -285,7 +268,6 @@ static void _setup_mdp_ops(struct dpu_hw_mdp_ops *ops,
ops->get_danger_status = dpu_hw_get_danger_status;
ops->setup_vsync_source = dpu_hw_setup_vsync_source;
ops->get_safe_status = dpu_hw_get_safe_status;
ops->reset_ubwc = dpu_hw_reset_ubwc;
ops->intf_audio_select = dpu_hw_intf_audio_select;
}
......
......@@ -126,13 +126,6 @@ struct dpu_hw_mdp_ops {
void (*get_safe_status)(struct dpu_hw_mdp *mdp,
struct dpu_danger_safe_status *status);
/**
* reset_ubwc - reset top level UBWC configuration
* @mdp: mdp top context driver
* @m: pointer to mdss catalog data
*/
void (*reset_ubwc)(struct dpu_hw_mdp *mdp, struct dpu_mdss_cfg *m);
/**
* intf_audio_select - select the external interface for audio
* @mdp: mdp top context driver
......
......@@ -15,6 +15,10 @@
#define HW_REV 0x0
#define HW_INTR_STATUS 0x0010
#define UBWC_STATIC 0x144
#define UBWC_CTRL_2 0x150
#define UBWC_PREDICTION_MODE 0x154
/* Max BW defined in KBps */
#define MAX_BW 6800000
......@@ -23,17 +27,6 @@ struct dpu_irq_controller {
struct irq_domain *domain;
};
struct dpu_hw_cfg {
u32 val;
u32 offset;
};
struct dpu_mdss_hw_init_handler {
u32 hw_rev;
u32 hw_reg_count;
struct dpu_hw_cfg* hw_cfg;
};
struct dpu_mdss {
struct msm_mdss base;
void __iomem *mmio;
......@@ -43,44 +36,6 @@ struct dpu_mdss {
u32 num_paths;
};
static struct dpu_hw_cfg hw_cfg[] = {
{
/* UBWC global settings */
.val = 0x1E,
.offset = 0x144,
}
};
static struct dpu_mdss_hw_init_handler cfg_handler[] = {
{ .hw_rev = DPU_HW_VER_620,
.hw_reg_count = ARRAY_SIZE(hw_cfg),
.hw_cfg = hw_cfg
},
};
static void dpu_mdss_hw_init(struct dpu_mdss *dpu_mdss, u32 hw_rev)
{
int i;
u32 count = 0;
struct dpu_hw_cfg *hw_cfg = NULL;
for (i = 0; i < ARRAY_SIZE(cfg_handler); i++) {
if (cfg_handler[i].hw_rev == hw_rev) {
hw_cfg = cfg_handler[i].hw_cfg;
count = cfg_handler[i].hw_reg_count;
break;
}
}
for (i = 0; i < count; i++ ) {
writel_relaxed(hw_cfg->val,
dpu_mdss->mmio + hw_cfg->offset);
hw_cfg++;
}
return;
}
static int dpu_mdss_parse_data_bus_icc_path(struct drm_device *dev,
struct dpu_mdss *dpu_mdss)
{
......@@ -223,7 +178,6 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
struct dpu_mdss *dpu_mdss = to_dpu_mdss(mdss);
struct dss_module_power *mp = &dpu_mdss->mp;
int ret;
u32 mdss_rev;
dpu_mdss_icc_request_bw(mdss);
......@@ -233,8 +187,25 @@ static int dpu_mdss_enable(struct msm_mdss *mdss)
return ret;
}
mdss_rev = readl_relaxed(dpu_mdss->mmio + HW_REV);
dpu_mdss_hw_init(dpu_mdss, mdss_rev);
/*
* ubwc config is part of the "mdss" region which is not accessible
* from the rest of the driver. hardcode known configurations here
*/
switch (readl_relaxed(dpu_mdss->mmio + HW_REV)) {
case DPU_HW_VER_500:
case DPU_HW_VER_501:
writel_relaxed(0x420, dpu_mdss->mmio + UBWC_STATIC);
break;
case DPU_HW_VER_600:
/* TODO: 0x102e for LP_DDR4 */
writel_relaxed(0x103e, dpu_mdss->mmio + UBWC_STATIC);
writel_relaxed(2, dpu_mdss->mmio + UBWC_CTRL_2);
writel_relaxed(1, dpu_mdss->mmio + UBWC_PREDICTION_MODE);
break;
case DPU_HW_VER_620:
writel_relaxed(0x1e, dpu_mdss->mmio + UBWC_STATIC);
break;
}
return ret;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment