Commit 5468e82f authored by Linus Walleij's avatar Linus Walleij Committed by David S. Miller

net: phy: fixed-phy: Drop GPIO from fixed_phy_add()

All users of the fixed_phy_add() pass -1 as GPIO number
to the fixed phy driver, and all users of fixed_phy_register()
pass -1 as GPIO number as well, except for the device
tree MDIO bus.

Any new users should create a proper device and pass the
GPIO as a descriptor associated with the device so delete
the GPIO argument from the calls and drop the code looking
requesting a GPIO in fixed_phy_add().

In fixed phy_register(), investigate the "fixed-link"
node and pick the GPIO descriptor from "link-gpios" if
this property exists. Move the corresponding code out
of of_mdio.c as the fixed phy code anyways requires
OF to be in use.
Tested-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent fc9c5a4a
......@@ -267,7 +267,7 @@ static struct fixed_phy_status stmmac0_fixed_phy_status = {
During the board's device_init we can configure the first
MAC for fixed_link by calling:
fixed_phy_add(PHY_POLL, 1, &stmmac0_fixed_phy_status, -1);
fixed_phy_add(PHY_POLL, 1, &stmmac0_fixed_phy_status);
and the second one, with a real PHY device attached to the bus,
by using the stmmac_mdio_bus_data structure (to provide the id, the
reset procedure etc).
......
......@@ -127,7 +127,7 @@ static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
static int __init init_BSP(void)
{
m5272_uarts_init();
fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status, -1);
fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
return 0;
}
......
......@@ -683,7 +683,7 @@ static int __init ar7_register_devices(void)
if (ar7_has_high_cpmac()) {
res = fixed_phy_add(PHY_POLL, cpmac_high.id,
&fixed_phy_status, -1);
&fixed_phy_status);
if (!res) {
cpmac_get_mac(1, cpmac_high_data.dev_addr);
......@@ -696,7 +696,7 @@ static int __init ar7_register_devices(void)
} else
cpmac_low_data.phy_mask = 0xffffffff;
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status, -1);
res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
if (!res) {
cpmac_get_mac(0, cpmac_low_data.dev_addr);
res = platform_device_register(&cpmac_low);
......
......@@ -274,7 +274,7 @@ static int __init bcm47xx_register_bus_complete(void)
bcm47xx_leds_register();
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
return 0;
}
device_initcall(bcm47xx_register_bus_complete);
......@@ -343,7 +343,7 @@ static int __init dsa_loop_init(void)
unsigned int i;
for (i = 0; i < NUM_FIXED_PHYS; i++)
phydevs[i] = fixed_phy_register(PHY_POLL, &status, -1, NULL);
phydevs[i] = fixed_phy_register(PHY_POLL, &status, NULL);
return mdio_driver_register(&dsa_loop_drv);
}
......
......@@ -1446,7 +1446,7 @@ int bgmac_phy_connect_direct(struct bgmac *bgmac)
struct phy_device *phy_dev;
int err;
phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL);
phy_dev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
if (!phy_dev || IS_ERR(phy_dev)) {
dev_err(bgmac->dev, "Failed to register fixed PHY device\n");
return -ENODEV;
......
......@@ -525,7 +525,7 @@ static int bcmgenet_mii_pd_init(struct bcmgenet_priv *priv)
.asym_pause = 0,
};
phydev = fixed_phy_register(PHY_POLL, &fphy_status, -1, NULL);
phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
if (!phydev || IS_ERR(phydev)) {
dev_err(kdev, "failed to register fixed PHY device\n");
return -ENODEV;
......
......@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/seqlock.h>
#include <linux/idr.h>
#include <linux/netdevice.h>
......@@ -38,7 +38,7 @@ struct fixed_phy {
bool no_carrier;
int (*link_update)(struct net_device *, struct fixed_phy_status *);
struct list_head node;
int link_gpio;
struct gpio_desc *link_gpiod;
};
static struct platform_device *pdev;
......@@ -67,8 +67,8 @@ EXPORT_SYMBOL_GPL(fixed_phy_change_carrier);
static void fixed_phy_update(struct fixed_phy *fp)
{
if (!fp->no_carrier && gpio_is_valid(fp->link_gpio))
fp->status.link = !!gpio_get_value_cansleep(fp->link_gpio);
if (!fp->no_carrier && fp->link_gpiod)
fp->status.link = !!gpiod_get_value_cansleep(fp->link_gpiod);
}
static int fixed_mdio_read(struct mii_bus *bus, int phy_addr, int reg_num)
......@@ -133,9 +133,9 @@ int fixed_phy_set_link_update(struct phy_device *phydev,
}
EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_phy_status *status,
int link_gpio)
static int fixed_phy_add_gpiod(unsigned int irq, int phy_addr,
struct fixed_phy_status *status,
struct gpio_desc *gpiod)
{
int ret;
struct fixed_mdio_bus *fmb = &platform_fmb;
......@@ -156,24 +156,19 @@ int fixed_phy_add(unsigned int irq, int phy_addr,
fp->addr = phy_addr;
fp->status = *status;
fp->link_gpio = link_gpio;
if (gpio_is_valid(fp->link_gpio)) {
ret = gpio_request_one(fp->link_gpio, GPIOF_DIR_IN,
"fixed-link-gpio-link");
if (ret)
goto err_regs;
}
fp->link_gpiod = gpiod;
fixed_phy_update(fp);
list_add_tail(&fp->node, &fmb->phys);
return 0;
}
err_regs:
kfree(fp);
return ret;
int fixed_phy_add(unsigned int irq, int phy_addr,
struct fixed_phy_status *status) {
return fixed_phy_add_gpiod(irq, phy_addr, status, NULL);
}
EXPORT_SYMBOL_GPL(fixed_phy_add);
......@@ -187,8 +182,8 @@ static void fixed_phy_del(int phy_addr)
list_for_each_entry_safe(fp, tmp, &fmb->phys, node) {
if (fp->addr == phy_addr) {
list_del(&fp->node);
if (gpio_is_valid(fp->link_gpio))
gpio_free(fp->link_gpio);
if (fp->link_gpiod)
gpiod_put(fp->link_gpiod);
kfree(fp);
ida_simple_remove(&phy_fixed_ida, phy_addr);
return;
......@@ -196,12 +191,50 @@ static void fixed_phy_del(int phy_addr)
}
}
#ifdef CONFIG_OF_GPIO
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
struct device_node *fixed_link_node;
struct gpio_desc *gpiod;
if (!np)
return NULL;
fixed_link_node = of_get_child_by_name(np, "fixed-link");
if (!fixed_link_node)
return NULL;
/*
* As the fixed link is just a device tree node without any
* Linux device associated with it, we simply have obtain
* the GPIO descriptor from the device tree like this.
*/
gpiod = gpiod_get_from_of_node(fixed_link_node, "link-gpios", 0,
GPIOD_IN, "mdio");
of_node_put(fixed_link_node);
if (IS_ERR(gpiod)) {
if (PTR_ERR(gpiod) == -EPROBE_DEFER)
return gpiod;
pr_err("error getting GPIO for fixed link %pOF, proceed without\n",
fixed_link_node);
gpiod = NULL;
}
return gpiod;
}
#else
static struct gpio_desc *fixed_phy_get_gpiod(struct device_node *np)
{
return NULL;
}
#endif
struct phy_device *fixed_phy_register(unsigned int irq,
struct fixed_phy_status *status,
int link_gpio,
struct device_node *np)
{
struct fixed_mdio_bus *fmb = &platform_fmb;
struct gpio_desc *gpiod = NULL;
struct phy_device *phy;
int phy_addr;
int ret;
......@@ -209,12 +242,17 @@ struct phy_device *fixed_phy_register(unsigned int irq,
if (!fmb->mii_bus || fmb->mii_bus->state != MDIOBUS_REGISTERED)
return ERR_PTR(-EPROBE_DEFER);
/* Check if we have a GPIO associated with this fixed phy */
gpiod = fixed_phy_get_gpiod(np);
if (IS_ERR(gpiod))
return ERR_CAST(gpiod);
/* Get the next available PHY address, up to PHY_MAX_ADDR */
phy_addr = ida_simple_get(&phy_fixed_ida, 0, PHY_MAX_ADDR, GFP_KERNEL);
if (phy_addr < 0)
return ERR_PTR(phy_addr);
ret = fixed_phy_add(irq, phy_addr, status, link_gpio);
ret = fixed_phy_add_gpiod(irq, phy_addr, status, gpiod);
if (ret < 0) {
ida_simple_remove(&phy_fixed_ida, phy_addr);
return ERR_PTR(ret);
......
......@@ -2051,8 +2051,7 @@ static struct phy_device *lan7801_phy_init(struct lan78xx_net *dev)
phydev = phy_find_first(dev->mdiobus);
if (!phydev) {
netdev_dbg(dev->net, "PHY Not Found!! Registering Fixed PHY\n");
phydev = fixed_phy_register(PHY_POLL, &fphy_status, -1,
NULL);
phydev = fixed_phy_register(PHY_POLL, &fphy_status, NULL);
if (IS_ERR(phydev)) {
netdev_err(dev->net, "No PHY/fixed_PHY found\n");
return NULL;
......
......@@ -16,7 +16,6 @@
#include <linux/phy.h>
#include <linux/phy_fixed.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/of_mdio.h>
#include <linux/of_net.h>
......@@ -463,7 +462,6 @@ int of_phy_register_fixed_link(struct device_node *np)
struct device_node *fixed_link_node;
u32 fixed_link_prop[5];
const char *managed;
int link_gpio = -1;
if (of_property_read_string(np, "managed", &managed) == 0 &&
strcmp(managed, "in-band-status") == 0) {
......@@ -485,11 +483,7 @@ int of_phy_register_fixed_link(struct device_node *np)
status.pause = of_property_read_bool(fixed_link_node, "pause");
status.asym_pause = of_property_read_bool(fixed_link_node,
"asym-pause");
link_gpio = of_get_named_gpio_flags(fixed_link_node,
"link-gpios", 0, NULL);
of_node_put(fixed_link_node);
if (link_gpio == -EPROBE_DEFER)
return -EPROBE_DEFER;
goto register_phy;
}
......@@ -508,8 +502,7 @@ int of_phy_register_fixed_link(struct device_node *np)
return -ENODEV;
register_phy:
return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, link_gpio,
np));
return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np));
}
EXPORT_SYMBOL(of_phy_register_fixed_link);
......
......@@ -15,11 +15,9 @@ struct device_node;
#if IS_ENABLED(CONFIG_FIXED_PHY)
extern int fixed_phy_change_carrier(struct net_device *dev, bool new_carrier);
extern int fixed_phy_add(unsigned int irq, int phy_id,
struct fixed_phy_status *status,
int link_gpio);
struct fixed_phy_status *status);
extern struct phy_device *fixed_phy_register(unsigned int irq,
struct fixed_phy_status *status,
int link_gpio,
struct device_node *np);
extern void fixed_phy_unregister(struct phy_device *phydev);
extern int fixed_phy_set_link_update(struct phy_device *phydev,
......@@ -27,14 +25,12 @@ extern int fixed_phy_set_link_update(struct phy_device *phydev,
struct fixed_phy_status *));
#else
static inline int fixed_phy_add(unsigned int irq, int phy_id,
struct fixed_phy_status *status,
int link_gpio)
struct fixed_phy_status *status)
{
return -ENODEV;
}
static inline struct phy_device *fixed_phy_register(unsigned int irq,
struct fixed_phy_status *status,
int gpio_link,
struct device_node *np)
{
return ERR_PTR(-ENODEV);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment