Merge branch 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "The SoC bug fixes have calmed down sufficiently, there is one minor
  update for the MAINTAINERS file, and few bug fixes for dts
  descriptions:

   - Updates to the BananaPi R2-Pro (rk3568) dts to match production
     hardware rather than the prototype version.

   - Qualcomm sm8250 soundwire gets disabled on some machines to avoid
     crashes

   - A number of aspeed SoC specific fixes, addressing incorrect pin
     cotrol settings, some values in the romed8hm board, and a revert
     for an accidental removal of a DT node"

* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: omap: remove me as a maintainer
  ARM: dts: aspeed: Add video engine to g6
  ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
  ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
  ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
  ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
  dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
  pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
  dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
  pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
  ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
  arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
  arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
  arm64: dts: rockchip: Change io-domains of bpi-r2-pro

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -33,7 +33,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT,
-                  FSI1, FSI2, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
+                  FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3,
                   GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5,
                   GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16,
                   I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5,
@@ -58,7 +58,7 @@ patternProperties:
           $ref: "/schemas/types.yaml#/definitions/string"
           enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2,
                   ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4,
-                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWSPIABR, FWSPID, FWQSPID, FWSPIWP,
+                  EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP,
                   GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1,
                   GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10,
                   I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5,

MAINTAINERS

@@ -14374,7 +14374,6 @@ F:	arch/arm/*omap*/*pm*
 F:	drivers/cpufreq/omap-cpufreq.c
 
 OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
-M:	Rajendra Nayak <rnayak@codeaurora.org>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained

arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts

@@ -100,12 +100,14 @@ w83773g@4c {
 	lm25066@40 {
 		compatible = "lm25066";
 		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
 	};
 
 	/* 12VSB PMIC */
 	lm25066@41 {
 		compatible = "lm25066";
 		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
 	};
 };
 
@@ -196,7 +198,7 @@ &gpio {
 	gpio-line-names =
 		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
 			"", "", "", "",
-		/*  B */ "DDR_MEM_TEMP", "", "", "", "", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
 		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
 		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
 			"", "", "", "PSU_FAN_FAIL_N",

arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi

@@ -117,9 +117,9 @@ pinctrl_fwspid_default: fwspid_default {
 		groups = "FWSPID";
 	};
 
-	pinctrl_fwqspid_default: fwqspid_default {
-		function = "FWSPID";
-		groups = "FWQSPID";
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
 	};
 
 	pinctrl_fwspiwp_default: fwspiwp_default {
@@ -653,12 +653,12 @@ pinctrl_pwm9g1_default: pwm9g1_default {
 	};
 
 	pinctrl_qspi1_default: qspi1_default {
-		function = "QSPI1";
+		function = "SPI1";
 		groups = "QSPI1";
 	};
 
 	pinctrl_qspi2_default: qspi2_default {
-		function = "QSPI2";
+		function = "SPI2";
 		groups = "QSPI2";
 	};
 

arch/arm/boot/dts/aspeed-g6.dtsi

@@ -389,6 +389,16 @@ sbc: secure-boot-controller@1e6f2000 {
 				reg = <0x1e6f2000 0x1000>;
 			};
 
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;

arch/arm64/boot/dts/qcom/sm8250-mtp.dts

@@ -622,6 +622,10 @@ &qupv3_id_2 {
 	status = "okay";
 };
 
+&rxmacro {
+	status = "okay";
+};
+
 &slpi {
 	status = "okay";
 	firmware-name = "qcom/sm8250/slpi.mbn";
@@ -773,6 +777,8 @@ right_spkr: wsa8810-left@0,4{
 };
 
 &swr1 {
+	status = "okay";
+
 	wcd_rx: wcd9380-rx@0,4 {
 		compatible = "sdw20217010d00";
 		reg = <0 4>;
@@ -781,6 +787,8 @@ wcd_rx: wcd9380-rx@0,4 {
 };
 
 &swr2 {
+	status = "okay";
+
 	wcd_tx: wcd9380-tx@0,3 {
 		compatible = "sdw20217010d00";
 		reg = <0 3>;
@@ -819,6 +827,10 @@ config {
 	};
 };
 
+&txmacro {
+	status = "okay";
+};
+
 &uart12 {
 	status = "okay";
 };

arch/arm64/boot/dts/qcom/sm8250.dtsi

@@ -2255,6 +2255,7 @@ rxmacro: rxmacro@3200000 {
 			pinctrl-0 = <&rx_swr_active>;
 			compatible = "qcom,sm8250-lpass-rx-macro";
 			reg = <0 0x3200000 0 0x1000>;
+			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				<&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2273,6 +2274,7 @@ rxmacro: rxmacro@3200000 {
 		swr1: soundwire-controller@3210000 {
 			reg = <0 0x3210000 0 0x2000>;
 			compatible = "qcom,soundwire-v1.5.1";
+			status = "disabled";
 			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&rxmacro>;
 			clock-names = "iface";
@@ -2300,6 +2302,7 @@ txmacro: txmacro@3220000 {
 			pinctrl-0 = <&tx_swr_active>;
 			compatible = "qcom,sm8250-lpass-tx-macro";
 			reg = <0 0x3220000 0 0x1000>;
+			status = "disabled";
 
 			clocks = <&q6afecc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
 				 <&q6afecc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
@@ -2323,6 +2326,7 @@ swr2: soundwire-controller@3230000 {
 			compatible = "qcom,soundwire-v1.5.1";
 			interrupts-extended = <&intc GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "core";
+			status = "disabled";
 
 			clocks = <&txmacro>;
 			clock-names = "iface";

arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts

@@ -16,6 +16,7 @@ / {
 
 	aliases {
 		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
 		mmc0 = &sdmmc0;
 		mmc1 = &sdhci;
 	};
@@ -78,7 +79,6 @@ &gmac0 {
 	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
 	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
 	clock_in_out = "input";
-	phy-handle = <&rgmii_phy0>;
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac0_miim
@@ -90,8 +90,38 @@ &gmac0_rgmii_clk
 	snps,reset-active-low;
 	/* Reset time is 20ms, 100ms for rtl8211f */
 	snps,reset-delays-us = <0 20000 100000>;
+	tx_delay = <0x4f>;
+	rx_delay = <0x0f>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+		pause;
+	};
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus>;
+
+	snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	/* Reset time is 20ms, 100ms for rtl8211f */
+	snps,reset-delays-us = <0 20000 100000>;
+
 	tx_delay = <0x3c>;
 	rx_delay = <0x2f>;
+
 	status = "okay";
 };
 
@@ -315,8 +345,8 @@ &i2c5 {
 	status = "disabled";
 };
 
-&mdio0 {
-	rgmii_phy0: ethernet-phy@0 {
+&mdio1 {
+	rgmii_phy1: ethernet-phy@0 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x0>;
 	};
@@ -345,9 +375,9 @@ &pmu_io_domains {
 	pmuio2-supply = <&vcc3v3_pmu>;
 	vccio1-supply = <&vccio_acodec>;
 	vccio3-supply = <&vccio_sd>;
-	vccio4-supply = <&vcc_1v8>;
+	vccio4-supply = <&vcc_3v3>;
 	vccio5-supply = <&vcc_3v3>;
-	vccio6-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
 	vccio7-supply = <&vcc_3v3>;
 	status = "okay";
 };

drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c

@@ -1236,18 +1236,17 @@ FUNC_GROUP_DECL(SALT8, AA12);
 FUNC_GROUP_DECL(WDTRST4, AA12);
 
 #define AE12 196
-SIG_EXPR_LIST_DECL_SEMG(AE12, FWSPIDQ2, FWQSPID, FWSPID,
-			SIG_DESC_SET(SCU438, 4));
+SIG_EXPR_LIST_DECL_SESG(AE12, FWSPIQ2, FWQSPI, SIG_DESC_SET(SCU438, 4));
 SIG_EXPR_LIST_DECL_SESG(AE12, GPIOY4, GPIOY4);
-PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIDQ2),
+PIN_DECL_(AE12, SIG_EXPR_LIST_PTR(AE12, FWSPIQ2),
 	  SIG_EXPR_LIST_PTR(AE12, GPIOY4));
 
 #define AF12 197
-SIG_EXPR_LIST_DECL_SEMG(AF12, FWSPIDQ3, FWQSPID, FWSPID,
-			SIG_DESC_SET(SCU438, 5));
+SIG_EXPR_LIST_DECL_SESG(AF12, FWSPIQ3, FWQSPI, SIG_DESC_SET(SCU438, 5));
 SIG_EXPR_LIST_DECL_SESG(AF12, GPIOY5, GPIOY5);
-PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIDQ3),
+PIN_DECL_(AF12, SIG_EXPR_LIST_PTR(AF12, FWSPIQ3),
 	  SIG_EXPR_LIST_PTR(AF12, GPIOY5));
+FUNC_GROUP_DECL(FWQSPI, AE12, AF12);
 
 #define AC12 198
 SSSF_PIN_DECL(AC12, GPIOY6, FWSPIABR, SIG_DESC_SET(SCU438, 6));
@@ -1520,9 +1519,8 @@ SIG_EXPR_LIST_DECL_SEMG(Y4, EMMCDAT7, EMMCG8, EMMC, SIG_DESC_SET(SCU404, 3));
 PIN_DECL_3(Y4, GPIO18E3, FWSPIDMISO, VBMISO, EMMCDAT7);
 
 GROUP_DECL(FWSPID, Y1, Y2, Y3, Y4);
-GROUP_DECL(FWQSPID, Y1, Y2, Y3, Y4, AE12, AF12);
 GROUP_DECL(EMMCG8, AB4, AA4, AC4, AA5, Y5, AB5, AB6, AC5, Y1, Y2, Y3, Y4);
-FUNC_DECL_2(FWSPID, FWSPID, FWQSPID);
+FUNC_DECL_1(FWSPID, FWSPID);
 FUNC_GROUP_DECL(VB, Y1, Y2, Y3, Y4);
 FUNC_DECL_3(EMMC, EMMCG1, EMMCG4, EMMCG8);
 /*
@@ -1918,7 +1916,7 @@ static const struct aspeed_pin_group aspeed_g6_groups[] = {
 	ASPEED_PINCTRL_GROUP(FSI2),
 	ASPEED_PINCTRL_GROUP(FWSPIABR),
 	ASPEED_PINCTRL_GROUP(FWSPID),
-	ASPEED_PINCTRL_GROUP(FWQSPID),
+	ASPEED_PINCTRL_GROUP(FWQSPI),
 	ASPEED_PINCTRL_GROUP(FWSPIWP),
 	ASPEED_PINCTRL_GROUP(GPIT0),
 	ASPEED_PINCTRL_GROUP(GPIT1),
@@ -2160,6 +2158,7 @@ static const struct aspeed_pin_function aspeed_g6_functions[] = {
 	ASPEED_PINCTRL_FUNC(FSI2),
 	ASPEED_PINCTRL_FUNC(FWSPIABR),
 	ASPEED_PINCTRL_FUNC(FWSPID),
+	ASPEED_PINCTRL_FUNC(FWQSPI),
 	ASPEED_PINCTRL_FUNC(FWSPIWP),
 	ASPEED_PINCTRL_FUNC(GPIT0),
 	ASPEED_PINCTRL_FUNC(GPIT1),