drm/i915: remove last traces of I915_READ(), I915_WRITE() and POSTING_READ()

Good riddance! Remove the macros and their remaining references in
comments.

The following functions should be used instead, depending on the use
case:

- intel_uncore_read(), intel_uncore_write(), intel_uncore_posting_read()

- intel_de_read(), intel_de_write(), intel_de_posting_read()
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201130111601.2817-10-jani.nikula@intel.com

drivers/gpu/drm/i915/display/intel_dvo.c

@@ -301,12 +301,8 @@ static void intel_dvo_pre_enable(struct intel_atomic_state *state,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 
-	/*I915_WRITE(DVOB_SRCDIM,
-	  (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) |
-	  (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));*/
 	intel_de_write(dev_priv, dvo_srcdim_reg,
 		       (adjusted_mode->crtc_hdisplay << DVO_SRCDIM_HORIZONTAL_SHIFT) | (adjusted_mode->crtc_vdisplay << DVO_SRCDIM_VERTICAL_SHIFT));
-	/*I915_WRITE(DVOB, dvo_val);*/
 	intel_de_write(dev_priv, dvo_reg, dvo_val);
 }
 

drivers/gpu/drm/i915/i915_drv.h

@@ -1972,14 +1972,6 @@ mkwrite_device_info(struct drm_i915_private *dev_priv)
 int i915_reg_read_ioctl(struct drm_device *dev, void *data,
 			struct drm_file *file);
 
-#define __I915_REG_OP(op__, dev_priv__, ...) \
-	intel_uncore_##op__(&(dev_priv__)->uncore, __VA_ARGS__)
-
-#define I915_READ(reg__)	 __I915_REG_OP(read, dev_priv, (reg__))
-#define I915_WRITE(reg__, val__) __I915_REG_OP(write, dev_priv, (reg__), (val__))
-
-#define POSTING_READ(reg__)	__I915_REG_OP(posting_read, dev_priv, (reg__))
-
 /* i915_mm.c */
 int remap_io_mapping(struct vm_area_struct *vma,
 		     unsigned long addr, unsigned long pfn, unsigned long size,

drivers/gpu/drm/i915/i915_reg.h

@@ -10853,8 +10853,10 @@ enum skl_power_gate {
 #define  CNL_DRAM_RANK_3			(0x2 << 9)
 #define  CNL_DRAM_RANK_4			(0x3 << 9)
 
-/* Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
- * since on HSW we can't write to it using I915_WRITE. */
+/*
+ * Please see hsw_read_dcomp() and hsw_write_dcomp() before using this register,
+ * since on HSW we can't write to it using intel_uncore_write.
+ */
 #define D_COMP_HSW			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5F0C)
 #define D_COMP_BDW			_MMIO(0x138144)
 #define  D_COMP_RCOMP_IN_PROGRESS	(1 << 9)

drivers/gpu/drm/i915/intel_sideband.c

@@ -404,8 +404,8 @@ static int __sandybridge_pcode_rw(struct drm_i915_private *i915,
 	lockdep_assert_held(&i915->sb_lock);
 
 	/*
-	 * GEN6_PCODE_* are outside of the forcewake domain, we can
-	 * use te fw I915_READ variants to reduce the amount of work
+	 * GEN6_PCODE_* are outside of the forcewake domain, we can use
+	 * intel_uncore_read/write_fw variants to reduce the amount of work
 	 * required when reading/writing.
 	 */
 

drivers/gpu/drm/i915/intel_uncore.c

@@ -2126,7 +2126,7 @@ int __intel_wait_for_register_fw(struct intel_uncore *uncore,
  * This routine waits until the target register @reg contains the expected
  * @value after applying the @mask, i.e. it waits until ::
  *
- *     (I915_READ(reg) & mask) == value
+ *     (intel_uncore_read(uncore, reg) & mask) == value
  *
  * Otherwise, the wait will timeout after @timeout_ms milliseconds.
  *

drivers/gpu/drm/i915/intel_uncore.h

@@ -318,8 +318,8 @@ __uncore_write(write_notrace, 32, l, false)
  * will be implemented using 2 32-bit writes in an arbitrary order with
  * an arbitrary delay between them. This can cause the hardware to
  * act upon the intermediate value, possibly leading to corruption and
- * machine death. For this reason we do not support I915_WRITE64, or
- * uncore->funcs.mmio_writeq.
+ * machine death. For this reason we do not support intel_uncore_write64,
+ * or uncore->funcs.mmio_writeq.
  *
  * When reading a 64-bit value as two 32-bit values, the delay may cause
  * the two reads to mismatch, e.g. a timestamp overflowing. Also note that