Commit 550116d2 authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Linus Torvalds

scripts/spelling.txt: add "aligment" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  aligment||alignment

I did not touch the "N_BYTE_ALIGMENT" macro in
drivers/net/wireless/realtek/rtlwifi/wifi.h to avoid unpredictable
impact.

I fixed "_aligment_handler" in arch/openrisc/kernel/entry.S because
it is surrounded by #if 0 ... #endif.  It is surely safe and I
confirmed "_alignment_handler" is correct.

I also fixed the "controler" I found in the same hunk in
arch/openrisc/kernel/head.S.

Link: http://lkml.kernel.org/r/1481573103-11329-8-git-send-email-yamada.masahiro@socionext.comSigned-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 8ab102d6
...@@ -1051,9 +1051,9 @@ int arc_unwind(struct unwind_frame_info *frame) ...@@ -1051,9 +1051,9 @@ int arc_unwind(struct unwind_frame_info *frame)
++ptr; ++ptr;
} }
if (cie != NULL) { if (cie != NULL) {
/* get code aligment factor */ /* get code alignment factor */
state.codeAlign = get_uleb128(&ptr, end); state.codeAlign = get_uleb128(&ptr, end);
/* get data aligment factor */ /* get data alignment factor */
state.dataAlign = get_sleb128(&ptr, end); state.dataAlign = get_sleb128(&ptr, end);
if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end) if (state.codeAlign == 0 || state.dataAlign == 0 || ptr >= end)
cie = NULL; cie = NULL;
......
...@@ -319,7 +319,7 @@ EXCEPTION_ENTRY(_timer_handler) ...@@ -319,7 +319,7 @@ EXCEPTION_ENTRY(_timer_handler)
l.j _ret_from_intr l.j _ret_from_intr
l.nop l.nop
/* ---[ 0x600: Aligment exception ]-------------------------------------- */ /* ---[ 0x600: Alignment exception ]-------------------------------------- */
EXCEPTION_ENTRY(_alignment_handler) EXCEPTION_ENTRY(_alignment_handler)
CLEAR_LWA_FLAG(r3) CLEAR_LWA_FLAG(r3)
...@@ -331,7 +331,7 @@ EXCEPTION_ENTRY(_alignment_handler) ...@@ -331,7 +331,7 @@ EXCEPTION_ENTRY(_alignment_handler)
l.nop l.nop
#if 0 #if 0
EXCEPTION_ENTRY(_aligment_handler) EXCEPTION_ENTRY(_alignment_handler)
// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */ // l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */
l.addi r2,r4,0 l.addi r2,r4,0
// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */ // l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */
......
...@@ -325,7 +325,7 @@ _dispatch_do_ipage_fault: ...@@ -325,7 +325,7 @@ _dispatch_do_ipage_fault:
.org 0x500 .org 0x500
EXCEPTION_HANDLE(_timer_handler) EXCEPTION_HANDLE(_timer_handler)
/* ---[ 0x600: Aligment exception ]-------------------------------------- */ /* ---[ 0x600: Alignment exception ]-------------------------------------- */
.org 0x600 .org 0x600
EXCEPTION_HANDLE(_alignment_handler) EXCEPTION_HANDLE(_alignment_handler)
...@@ -640,8 +640,8 @@ _flush_tlb: ...@@ -640,8 +640,8 @@ _flush_tlb:
/* ========================================[ cache ]=== */ /* ========================================[ cache ]=== */
/* aligment here so we don't change memory offsets with /* alignment here so we don't change memory offsets with
* memory controler defined * memory controller defined
*/ */
.align 0x2000 .align 0x2000
......
...@@ -19,8 +19,8 @@ ...@@ -19,8 +19,8 @@
/* TODO /* TODO
* - clean up __offset & stuff * - clean up __offset & stuff
* - change all 8192 aligment to PAGE !!! * - change all 8192 alignment to PAGE !!!
* - recheck if all aligments are really needed * - recheck if all alignments are really needed
*/ */
# define LOAD_OFFSET PAGE_OFFSET # define LOAD_OFFSET PAGE_OFFSET
......
...@@ -188,7 +188,7 @@ ...@@ -188,7 +188,7 @@
#define HW_ASSISTED_I2C_STATUS_FAILURE 2 #define HW_ASSISTED_I2C_STATUS_FAILURE 2
#define HW_ASSISTED_I2C_STATUS_SUCCESS 1 #define HW_ASSISTED_I2C_STATUS_SUCCESS 1
#pragma pack(1) // BIOS data must use byte aligment #pragma pack(1) // BIOS data must use byte alignment
// Define offset to location of ROM header. // Define offset to location of ROM header.
#define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L #define OFFSET_TO_POINTER_TO_ATOM_ROM_HEADER 0x00000048L
...@@ -9180,7 +9180,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 ...@@ -9180,7 +9180,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3
/*********************************************************************************/ /*********************************************************************************/
#pragma pack() // BIOS data must use byte aligment #pragma pack() // BIOS data must use byte alignment
#pragma pack(1) #pragma pack(1)
...@@ -9211,7 +9211,7 @@ typedef struct _ATOM_SERVICE_INFO ...@@ -9211,7 +9211,7 @@ typedef struct _ATOM_SERVICE_INFO
#pragma pack() // BIOS data must use byte aligment #pragma pack() // BIOS data must use byte alignment
// //
// AMD ACPI Table // AMD ACPI Table
......
...@@ -60,7 +60,7 @@ render_state_get_rodata(const struct intel_engine_cs *engine) ...@@ -60,7 +60,7 @@ render_state_get_rodata(const struct intel_engine_cs *engine)
* this is sufficient as the null state generator makes the final batch * this is sufficient as the null state generator makes the final batch
* with two passes to build command and state separately. At this point * with two passes to build command and state separately. At this point
* the size of both are known and it compacts them by relocating the state * the size of both are known and it compacts them by relocating the state
* right after the commands taking care of aligment so we should sufficient * right after the commands taking care of alignment so we should sufficient
* space below them for adding new commands. * space below them for adding new commands.
*/ */
#define OUT_BATCH(batch, i, val) \ #define OUT_BATCH(batch, i, val) \
......
...@@ -181,7 +181,7 @@ ...@@ -181,7 +181,7 @@
#define HW_ASSISTED_I2C_STATUS_FAILURE 2 #define HW_ASSISTED_I2C_STATUS_FAILURE 2
#define HW_ASSISTED_I2C_STATUS_SUCCESS 1 #define HW_ASSISTED_I2C_STATUS_SUCCESS 1
#pragma pack(1) /* BIOS data must use byte aligment */ #pragma pack(1) /* BIOS data must use byte alignment */
/* Define offset to location of ROM header. */ /* Define offset to location of ROM header. */
...@@ -7909,7 +7909,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3 ...@@ -7909,7 +7909,7 @@ typedef struct _ATOM_POWERPLAY_INFO_V3
/*********************************************************************************/ /*********************************************************************************/
#pragma pack() // BIOS data must use byte aligment #pragma pack() // BIOS data must use byte alignment
// //
// AMD ACPI Table // AMD ACPI Table
......
...@@ -358,7 +358,7 @@ struct fimc_pix_limit { ...@@ -358,7 +358,7 @@ struct fimc_pix_limit {
* @pix_limit: pixel size constraints for the scaler * @pix_limit: pixel size constraints for the scaler
* @min_inp_pixsize: minimum input pixel size * @min_inp_pixsize: minimum input pixel size
* @min_out_pixsize: minimum output pixel size * @min_out_pixsize: minimum output pixel size
* @hor_offs_align: horizontal pixel offset aligment * @hor_offs_align: horizontal pixel offset alignment
* @min_vsize_align: minimum vertical pixel size alignment * @min_vsize_align: minimum vertical pixel size alignment
*/ */
struct fimc_variant { struct fimc_variant {
......
...@@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = { ...@@ -59,13 +59,13 @@ static const struct ani_ofdm_level_entry ofdm_level_table[] = {
/* /*
* MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm. * MRC (Maximal Ratio Combining) has always been used with multi-antenna ofdm.
* With OFDM for single stream you just add up all antenna inputs, you're * With OFDM for single stream you just add up all antenna inputs, you're
* only interested in what you get after FFT. Signal aligment is also not * only interested in what you get after FFT. Signal alignment is also not
* required for OFDM because any phase difference adds up in the frequency * required for OFDM because any phase difference adds up in the frequency
* domain. * domain.
* *
* MRC requires extra work for use with CCK. You need to align the antenna * MRC requires extra work for use with CCK. You need to align the antenna
* signals from the different antenna before you can add the signals together. * signals from the different antenna before you can add the signals together.
* You need aligment of signals as CCK is in time domain, so addition can cancel * You need alignment of signals as CCK is in time domain, so addition can cancel
* your signal completely if phase is 180 degrees (think of adding sine waves). * your signal completely if phase is 180 degrees (think of adding sine waves).
* You also need to remove noise before the addition and this is where ANI * You also need to remove noise before the addition and this is where ANI
* MRC CCK comes into play. One of the antenna inputs may be stronger but * MRC CCK comes into play. One of the antenna inputs may be stronger but
......
...@@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen, ...@@ -455,7 +455,7 @@ static u32 _rtl92s_fill_h2c_cmd(struct sk_buff *skb, u32 h2cbufferlen,
u8 i = 0; u8 i = 0;
do { do {
/* 8 - Byte aligment */ /* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */ /* Buffer length is not enough */
...@@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len) ...@@ -504,7 +504,7 @@ static u32 _rtl92s_get_h2c_cmdlen(u32 h2cbufferlen, u32 cmd_num, u32 *pcmd_len)
u8 i = 0; u8 i = 0;
do { do {
/* 8 - Byte aligment */ /* 8 - Byte alignment */
len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8); len = H2C_TX_CMD_HDR_LEN + N_BYTE_ALIGMENT(pcmd_len[i], 8);
/* Buffer length is not enough */ /* Buffer length is not enough */
......
...@@ -680,7 +680,7 @@ struct bfi_ioim_req_s { ...@@ -680,7 +680,7 @@ struct bfi_ioim_req_s {
/* /*
* SG elements array within the IO request must be double word * SG elements array within the IO request must be double word
* aligned. This aligment is required to optimize SGM setup for the IO. * aligned. This alignment is required to optimize SGM setup for the IO.
*/ */
struct bfi_sge_s sges[BFI_SGE_INLINE_MAX]; struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
u8 io_timeout; u8 io_timeout;
......
...@@ -667,7 +667,7 @@ int xt_compat_check_entry_offsets(const void *base, const char *elems, ...@@ -667,7 +667,7 @@ int xt_compat_check_entry_offsets(const void *base, const char *elems,
COMPAT_XT_ALIGN(target_offset + sizeof(struct compat_xt_standard_target)) != next_offset) COMPAT_XT_ALIGN(target_offset + sizeof(struct compat_xt_standard_target)) != next_offset)
return -EINVAL; return -EINVAL;
/* compat_xt_entry match has less strict aligment requirements, /* compat_xt_entry match has less strict alignment requirements,
* otherwise they are identical. In case of padding differences * otherwise they are identical. In case of padding differences
* we need to add compat version of xt_check_entry_match. * we need to add compat version of xt_check_entry_match.
*/ */
......
...@@ -71,6 +71,7 @@ algoritm||algorithm ...@@ -71,6 +71,7 @@ algoritm||algorithm
algoritms||algorithms algoritms||algorithms
algorrithm||algorithm algorrithm||algorithm
algorritm||algorithm algorritm||algorithm
aligment||alignment
allign||align allign||align
allocatrd||allocated allocatrd||allocated
allocte||allocate allocte||allocate
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment