Commit 552b8b36 authored by Zubair Lutfullah Kakakhel's avatar Zubair Lutfullah Kakakhel Committed by Ralf Baechle

MIPS: xilfpga: Add xilfpga device tree files.

Add device tree files for the MIPSfpga platform.

See Documentation/devicetree/bindings/mips/img/xilfpga.txt
for details about MIPSfpga
Signed-off-by: default avatarZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Cc: robh+dt@kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11362/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 26c188be
......@@ -6,6 +6,7 @@ dts-dirs += mti
dts-dirs += netlogic
dts-dirs += qca
dts-dirs += ralink
dts-dirs += xilfpga
obj-y := $(addsuffix /, $(dts-dirs))
......
dtb-$(CONFIG_XILFPGA_NEXYS4DDR) += nexys4ddr.dtb
obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y))
# Force kbuild to make empty built-in.o if necessary
obj- += dummy.o
always := $(dtb-y)
clean-files := *.dtb *.dtb.S
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "img,xilfpga";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,m14Kc";
clocks = <&ext>;
reg = <0>;
};
};
ext: ext {
compatible = "fixed-clock";
#clock-cells = <0>;
};
};
/dts-v1/;
#include "microAptiv.dtsi"
/ {
compatible = "digilent,nexys4ddr";
memory {
device_type = "memory";
reg = <0x0 0x08000000>;
};
cpuintc: interrupt-controller@0 {
#address-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
compatible = "mti,cpu-interrupt-controller";
};
axi_gpio: gpio@10600000 {
#gpio-cells = <1>;
compatible = "xlnx,xps-gpio-1.00.a";
gpio-controller;
reg = <0x10600000 0x10000>;
xlnx,all-inputs = <0x0>;
xlnx,dout-default = <0x0>;
xlnx,gpio-width = <0x16>;
xlnx,interrupt-present = <0x0>;
xlnx,is-dual = <0x0>;
xlnx,tri-default = <0xffffffff>;
} ;
axi_uart16550: serial@10400000 {
compatible = "ns16550a";
reg = <0x10400000 0x10000>;
reg-shift = <2>;
reg-offset = <0x1000>;
clocks = <&ext>;
};
};
&ext {
clock-frequency = <50000000>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment