arm64: dts: ti: k3-am62*: Add PHY2 region to USB wrapper node

Add PHY2 register space to USB wrapper node. This is required
to deal with Errata i2409.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240412-for-v6-9-am62-usb-errata-dt-v1-1-ef0d79920f75@kernel.org
Closes: https://lore.kernel.org/all/20240408095200.GA14655@francesco-nb/Signed-off-by: Nishanth Menon <nm@ti.com>

arch/arm64/boot/dts/ti/k3-am62-main.dtsi

@@ -619,7 +619,8 @@ sdhci2: mmc@fa20000 {
 
 	usbss0: dwc3-usb@f900000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f900000 0x00 0x800>;
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
 		clocks = <&k3_clks 161 3>;
 		clock-names = "ref";
 		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
@@ -644,7 +645,8 @@ usb0: usb@31000000 {
 
 	usbss1: dwc3-usb@f910000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f910000 0x00 0x800>;
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
 		clocks = <&k3_clks 162 3>;
 		clock-names = "ref";
 		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;

arch/arm64/boot/dts/ti/k3-am62a-main.dtsi

@@ -603,7 +603,8 @@ sdhci2: mmc@fa20000 {
 
 	usbss0: dwc3-usb@f900000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f900000 0x00 0x800>;
+		reg = <0x00 0x0f900000 0x00 0x800>,
+		      <0x00 0x0f908000 0x00 0x400>;
 		clocks = <&k3_clks 161 3>;
 		clock-names = "ref";
 		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4008>;
@@ -626,7 +627,8 @@ usb0: usb@31000000 {
 
 	usbss1: dwc3-usb@f910000 {
 		compatible = "ti,am62-usb";
-		reg = <0x00 0x0f910000 0x00 0x800>;
+		reg = <0x00 0x0f910000 0x00 0x800>,
+		      <0x00 0x0f918000 0x00 0x400>;
 		clocks = <&k3_clks 162 3>;
 		clock-names = "ref";
 		ti,syscon-phy-pll-refclk = <&wkup_conf 0x4018>;