Merge branch 'for-linville' of git://github.com/kvalo/ath

drivers/net/wireless/ath/ath10k/Kconfig

@@ -37,3 +37,10 @@ config ATH10K_TRACING
 	---help---
 	  Select this to ath10k use tracing infrastructure.
 
+config ATH10K_DFS_CERTIFIED
+	bool "Atheros DFS support for certified platforms"
+	depends on ATH10K && CFG80211_CERTIFICATION_ONUS
+	default n
+	---help---
+	This option enables DFS support for initiating radiation on
+	ath10k.

drivers/net/wireless/ath/ath10k/core.h

@@ -253,6 +253,9 @@ struct ath10k_vif {
 			u8 bssid[ETH_ALEN];
 		} ibss;
 	} u;
+
+	u8 fixed_rate;
+	u8 fixed_nss;
 };
 
 struct ath10k_vif_iter {
@@ -272,6 +275,8 @@ struct ath10k_debug {
 	struct delayed_work htt_stats_dwork;
 	struct ath10k_dfs_stats dfs_stats;
 	struct ath_dfs_pool_stats dfs_pool_stats;
+
+	u32 fw_dbglog_mask;
 };
 
 enum ath10k_state {
@@ -306,6 +311,9 @@ enum ath10k_fw_features {
 	/* firmware support tx frame management over WMI, otherwise it's HTT */
 	ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2,
 
+	/* Firmware does not support P2P */
+	ATH10K_FW_FEATURE_NO_P2P = 3,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
@@ -429,6 +437,9 @@ struct ath10k {
 	struct list_head peers;
 	wait_queue_head_t peer_mapping_wq;
 
+	/* number of created peers; protected by data_lock */
+	int num_peers;
+
 	struct work_struct offchan_tx_work;
 	struct sk_buff_head offchan_tx_queue;
 	struct completion offchan_tx_completed;

drivers/net/wireless/ath/ath10k/debug.c

@@ -614,6 +614,61 @@ static const struct file_operations fops_htt_stats_mask = {
 	.llseek = default_llseek,
 };
 
+static ssize_t ath10k_read_fw_dbglog(struct file *file,
+					    char __user *user_buf,
+					    size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned int len;
+	char buf[32];
+
+	len = scnprintf(buf, sizeof(buf), "0x%08x\n",
+			ar->debug.fw_dbglog_mask);
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t ath10k_write_fw_dbglog(struct file *file,
+				      const char __user *user_buf,
+				      size_t count, loff_t *ppos)
+{
+	struct ath10k *ar = file->private_data;
+	unsigned long mask;
+	int ret;
+
+	ret = kstrtoul_from_user(user_buf, count, 0, &mask);
+	if (ret)
+		return ret;
+
+	mutex_lock(&ar->conf_mutex);
+
+	ar->debug.fw_dbglog_mask = mask;
+
+	if (ar->state == ATH10K_STATE_ON) {
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		if (ret) {
+			ath10k_warn("dbglog cfg failed from debugfs: %d\n",
+				    ret);
+			goto exit;
+		}
+	}
+
+	ret = count;
+
+exit:
+	mutex_unlock(&ar->conf_mutex);
+
+	return ret;
+}
+
+static const struct file_operations fops_fw_dbglog = {
+	.read = ath10k_read_fw_dbglog,
+	.write = ath10k_write_fw_dbglog,
+	.open = simple_open,
+	.owner = THIS_MODULE,
+	.llseek = default_llseek,
+};
+
 int ath10k_debug_start(struct ath10k *ar)
 {
 	int ret;
@@ -625,6 +680,14 @@ int ath10k_debug_start(struct ath10k *ar)
 		/* continue normally anyway, this isn't serious */
 		ath10k_warn("failed to start htt stats workqueue: %d\n", ret);
 
+	if (ar->debug.fw_dbglog_mask) {
+		ret = ath10k_wmi_dbglog_cfg(ar, ar->debug.fw_dbglog_mask);
+		if (ret)
+			/* not serious */
+			ath10k_warn("failed to enable dbglog during start: %d",
+				    ret);
+	}
+
 	return 0;
 }
 
@@ -747,6 +810,9 @@ int ath10k_debug_create(struct ath10k *ar)
 	debugfs_create_file("htt_stats_mask", S_IRUSR, ar->debug.debugfs_phy,
 			    ar, &fops_htt_stats_mask);
 
+	debugfs_create_file("fw_dbglog", S_IRUSR, ar->debug.debugfs_phy,
+			    ar, &fops_fw_dbglog);
+
 	if (config_enabled(CONFIG_ATH10K_DFS_CERTIFIED)) {
 		debugfs_create_file("dfs_simulate_radar", S_IWUSR,
 				    ar->debug.debugfs_phy, ar,

drivers/net/wireless/ath/ath10k/htt.h

@@ -1183,6 +1183,7 @@ struct htt_rx_info {
 	} rate;
 	bool fcs_err;
 	bool amsdu_more;
+	bool mic_err;
 };
 
 struct ath10k_htt {

drivers/net/wireless/ath/ath10k/htt_rx.c

@@ -838,6 +838,20 @@ static bool ath10k_htt_rx_has_fcs_err(struct sk_buff *skb)
 	return false;
 }
 
+static bool ath10k_htt_rx_has_mic_err(struct sk_buff *skb)
+{
+	struct htt_rx_desc *rxd;
+	u32 flags;
+
+	rxd = (void *)skb->data - sizeof(*rxd);
+	flags = __le32_to_cpu(rxd->attention.flags);
+
+	if (flags & RX_ATTENTION_FLAGS_TKIP_MIC_ERR)
+		return true;
+
+	return false;
+}
+
 static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb)
 {
 	struct htt_rx_desc *rxd;
@@ -960,6 +974,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt,
 
 			info.skb     = msdu_head;
 			info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head);
+			info.mic_err = ath10k_htt_rx_has_mic_err(msdu_head);
 			info.signal  = ATH10K_DEFAULT_NOISE_FLOOR;
 			info.signal += rx->ppdu.combined_rssi;
 

drivers/net/wireless/ath/ath10k/hw.h

@@ -115,6 +115,7 @@ enum ath10k_mcast2ucast_mode {
 #define TARGET_10X_MAC_AGGR_DELIM		0
 #define TARGET_10X_AST_SKID_LIMIT		16
 #define TARGET_10X_NUM_PEERS			(128 + (TARGET_10X_NUM_VDEVS))
+#define TARGET_10X_NUM_PEERS_MAX		128
 #define TARGET_10X_NUM_OFFLOAD_PEERS		0
 #define TARGET_10X_NUM_OFFLOAD_REORDER_BUFS	0
 #define TARGET_10X_NUM_PEER_KEYS		2

drivers/net/wireless/ath/ath10k/trace.h

@@ -182,6 +182,27 @@ TRACE_EVENT(ath10k_htt_stats,
 	)
 );
 
+TRACE_EVENT(ath10k_wmi_dbglog,
+	TP_PROTO(void *buf, size_t buf_len),
+
+	TP_ARGS(buf, buf_len),
+
+	TP_STRUCT__entry(
+		__field(size_t, buf_len)
+		__dynamic_array(u8, buf, buf_len)
+	),
+
+	TP_fast_assign(
+		__entry->buf_len = buf_len;
+		memcpy(__get_dynamic_array(buf), buf, buf_len);
+	),
+
+	TP_printk(
+		"len %zu",
+		__entry->buf_len
+	)
+);
+
 #endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/
 
 /* we don't want to use include/trace/events */

drivers/net/wireless/ath/ath10k/txrx.c

@@ -231,7 +231,7 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info)
 				~IEEE80211_FCTL_PROTECTED);
 	}
 
-	if (info->status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
+	if (info->mic_err)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
 	if (info->fcs_err)

drivers/net/wireless/ath/ath10k/wmi.c

@@ -16,6 +16,7 @@
  */
 
 #include <linux/skbuff.h>
+#include <linux/ctype.h>
 
 #include "core.h"
 #include "htc.h"
@@ -875,6 +876,7 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	struct wmi_mgmt_rx_event_v2 *ev_v2;
 	struct wmi_mgmt_rx_hdr_v1 *ev_hdr;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_channel *ch;
 	struct ieee80211_hdr *hdr;
 	u32 rx_status;
 	u32 channel;
@@ -927,7 +929,25 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	if (rx_status & WMI_RX_STATUS_ERR_MIC)
 		status->flag |= RX_FLAG_MMIC_ERROR;
 
-	status->band = phy_mode_to_band(phy_mode);
+	/* HW can Rx CCK rates on 5GHz. In that case phy_mode is set to
+	 * MODE_11B. This means phy_mode is not a reliable source for the band
+	 * of mgmt rx. */
+
+	ch = ar->scan_channel;
+	if (!ch)
+		ch = ar->rx_channel;
+
+	if (ch) {
+		status->band = ch->band;
+
+		if (phy_mode == MODE_11B &&
+		    status->band == IEEE80211_BAND_5GHZ)
+			ath10k_dbg(ATH10K_DBG_MGMT, "wmi mgmt rx 11b (CCK) on 5GHz\n");
+	} else {
+		ath10k_warn("using (unreliable) phy_mode to extract band for mgmt rx\n");
+		status->band = phy_mode_to_band(phy_mode);
+	}
+
 	status->freq = ieee80211_channel_to_frequency(channel, status->band);
 	status->signal = snr + ATH10K_DEFAULT_NOISE_FLOOR;
 	status->rate_idx = get_rate_idx(rate, status->band);
@@ -937,7 +957,11 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	hdr = (struct ieee80211_hdr *)skb->data;
 	fc = le16_to_cpu(hdr->frame_control);
 
-	if (fc & IEEE80211_FCTL_PROTECTED) {
+	/* FW delivers WEP Shared Auth frame with Protected Bit set and
+	 * encrypted payload. However in case of PMF it delivers decrypted
+	 * frames with Protected Bit set. */
+	if (ieee80211_has_protected(hdr->frame_control) &&
+	    !ieee80211_is_auth(hdr->frame_control)) {
 		status->flag |= RX_FLAG_DECRYPTED | RX_FLAG_IV_STRIPPED |
 				RX_FLAG_MMIC_STRIPPED;
 		hdr->frame_control = __cpu_to_le16(fc &
@@ -1047,9 +1071,14 @@ static void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb)
 	ath10k_dbg(ATH10K_DBG_WMI, "WMI_ECHO_EVENTID\n");
 }
 
-static void ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
+static int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_MESG_EVENTID\n");
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event debug mesg len %d\n",
+		   skb->len);
+
+	trace_ath10k_wmi_dbglog(skb->data, skb->len);
+
+	return 0;
 }
 
 static void ath10k_wmi_event_update_stats(struct ath10k *ar,
@@ -1653,9 +1682,37 @@ static void ath10k_wmi_event_profile_match(struct ath10k *ar,
 }
 
 static void ath10k_wmi_event_debug_print(struct ath10k *ar,
-				  struct sk_buff *skb)
+					 struct sk_buff *skb)
 {
-	ath10k_dbg(ATH10K_DBG_WMI, "WMI_DEBUG_PRINT_EVENTID\n");
+	char buf[101], c;
+	int i;
+
+	for (i = 0; i < sizeof(buf) - 1; i++) {
+		if (i >= skb->len)
+			break;
+
+		c = skb->data[i];
+
+		if (c == '\0')
+			break;
+
+		if (isascii(c) && isprint(c))
+			buf[i] = c;
+		else
+			buf[i] = '.';
+	}
+
+	if (i == sizeof(buf) - 1)
+		ath10k_warn("wmi debug print truncated: %d\n", skb->len);
+
+	/* for some reason the debug prints end with \n, remove that */
+	if (skb->data[i - 1] == '\n')
+		i--;
+
+	/* the last byte is always reserved for the null character */
+	buf[i] = '\0';
+
+	ath10k_dbg(ATH10K_DBG_WMI, "wmi event debug print '%s'\n", buf);
 }
 
 static void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb)
@@ -3445,3 +3502,40 @@ int ath10k_wmi_force_fw_hang(struct ath10k *ar,
 		   type, delay_ms);
 	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
 }
+
+int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable)
+{
+	struct wmi_dbglog_cfg_cmd *cmd;
+	struct sk_buff *skb;
+	u32 cfg;
+
+	skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_dbglog_cfg_cmd *)skb->data;
+
+	if (module_enable) {
+		cfg = SM(ATH10K_DBGLOG_LEVEL_VERBOSE,
+			 ATH10K_DBGLOG_CFG_LOG_LVL);
+	} else {
+		/* set back defaults, all modules with WARN level */
+		cfg = SM(ATH10K_DBGLOG_LEVEL_WARN,
+			 ATH10K_DBGLOG_CFG_LOG_LVL);
+		module_enable = ~0;
+	}
+
+	cmd->module_enable = __cpu_to_le32(module_enable);
+	cmd->module_valid = __cpu_to_le32(~0);
+	cmd->config_enable = __cpu_to_le32(cfg);
+	cmd->config_valid = __cpu_to_le32(ATH10K_DBGLOG_CFG_LOG_LVL_MASK);
+
+	ath10k_dbg(ATH10K_DBG_WMI,
+		   "wmi dbglog cfg modules %08x %08x config %08x %08x\n",
+		   __le32_to_cpu(cmd->module_enable),
+		   __le32_to_cpu(cmd->module_valid),
+		   __le32_to_cpu(cmd->config_enable),
+		   __le32_to_cpu(cmd->config_valid));
+
+	return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->dbglog_cfg_cmdid);
+}

drivers/net/wireless/ath/ath10k/wmi.h

@@ -3003,6 +3003,18 @@ struct wmi_vdev_install_key_arg {
 	const void *key_data;
 };
 
+/*
+ * vdev fixed rate format:
+ * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
+ * - nss      - b5:b4 - ss number (0 mean 1ss)
+ * - rate_mcs - b3:b0 - as below
+ *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
+ *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
+ *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
+ *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
+ *    HT/VHT: MCS index
+ */
+
 /* Preamble types to be used with VDEV fixed rate configuration */
 enum wmi_rate_preamble {
 	WMI_RATE_PREAMBLE_OFDM,
@@ -4090,6 +4102,54 @@ struct wmi_force_fw_hang_cmd {
 	__le32 delay_ms;
 } __packed;
 
+enum ath10k_dbglog_level {
+	ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
+	ATH10K_DBGLOG_LEVEL_INFO = 1,
+	ATH10K_DBGLOG_LEVEL_WARN = 2,
+	ATH10K_DBGLOG_LEVEL_ERR = 3,
+};
+
+/* VAP ids to enable dbglog */
+#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB		0
+#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK		0x0000ffff
+
+/* to enable dbglog in the firmware */
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB	16
+#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK	0x00010000
+
+/* timestamp resolution */
+#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB	17
+#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK	0x000E0000
+
+/* number of queued messages before sending them to the host */
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB	20
+#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK	0x0ff00000
+
+/*
+ * Log levels to enable. This defines the minimum level to enable, this is
+ * not a bitmask. See enum ath10k_dbglog_level for the values.
+ */
+#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB		28
+#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK		0x70000000
+
+/*
+ * Note: this is a cleaned up version of a struct firmware uses. For
+ * example, config_valid was hidden inside an array.
+ */
+struct wmi_dbglog_cfg_cmd {
+	/* bitmask to hold mod id config*/
+	__le32 module_enable;
+
+	/* see ATH10K_DBGLOG_CFG_ */
+	__le32 config_enable;
+
+	/* mask of module id bits to be changed */
+	__le32 module_valid;
+
+	/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
+	__le32 config_valid;
+} __packed;
+
 #define ATH10K_RTS_MAX		2347
 #define ATH10K_FRAGMT_THRESHOLD_MIN	540
 #define ATH10K_FRAGMT_THRESHOLD_MAX	2346
@@ -4167,5 +4227,6 @@ int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
 int ath10k_wmi_force_fw_hang(struct ath10k *ar,
 			     enum wmi_force_fw_hang_type type, u32 delay_ms);
 int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
+int ath10k_wmi_dbglog_cfg(struct ath10k *ar, u32 module_enable);
 
 #endif /* _WMI_H_ */