Skip to content

L
linux
Commit 55b87608 authored by Mahesh Rajashekhara's avatar Mahesh Rajashekhara Committed by James Bottomley
Browse files
Options

aacraid: Tune response path if IsFastPath bit set 

If 'IsFastPath' bit is set, then response path assumes no error and skips
error check.
Reviewed-by: default avatarMurthy Bhat <Murthy.Bhat@pmcs.com>
Reviewed-by: default avatarKarthikeya Sunkesula <Karthikeya.Sunkesula@pmcs.com>
Signed-off-by: default avatarMahesh Rajashekhara <Mahesh.Rajashekhara@pmcs.com>
Signed-off-by: default avatarJames Bottomley <JBottomley@Odin.com>
parent c6992781
Hide whitespace changes
Inline Side-by-side
Showing with 137 additions and 122 deletions
drivers/scsi/aacraid/aachba.c
View file @ 55b87608
......@@ -2977,11 +2977,16 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
return;
BUG_ON(fibptr == NULL);
dev = fibptr->dev;
srbreply = (struct aac_srb_reply *) fib_data(fibptr);
scsi_dma_unmap(scsicmd);
/* expose physical device if expose_physicald flag is on */
if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
&& expose_physicals > 0)
aac_expose_phy_device(scsicmd);
srbreply = (struct aac_srb_reply *) fib_data(fibptr);
scsicmd->sense_buffer[0] = '\0'; /* Initialize sense valid flag to false */
if (fibptr->flags & FIB_CONTEXT_FLAG_FASTRESP) {
......@@ -2994,147 +2999,157 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
*/
scsi_set_resid(scsicmd, scsi_bufflen(scsicmd)
- le32_to_cpu(srbreply->data_xfer_length));
}
scsi_dma_unmap(scsicmd);
/* expose physical device if expose_physicald flag is on */
if (scsicmd->cmnd[0] == INQUIRY && !(scsicmd->cmnd[1] & 0x01)
&& expose_physicals > 0)
aac_expose_phy_device(scsicmd);
/*
* First check the fib status
*/
/*
* First check the fib status
*/
if (le32_to_cpu(srbreply->status) != ST_OK) {
int len;
if (le32_to_cpu(srbreply->status) != ST_OK){
int len;
printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
SCSI_SENSE_BUFFERSIZE);
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8 | SAM_STAT_CHECK_CONDITION;
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
}
printk(KERN_WARNING "aac_srb_callback: srb failed, status = %d\n", le32_to_cpu(srbreply->status));
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
SCSI_SENSE_BUFFERSIZE);
scsicmd->result = DID_ERROR << 16
| COMMAND_COMPLETE << 8
| SAM_STAT_CHECK_CONDITION;
memcpy(scsicmd->sense_buffer,
srbreply->sense_data, len);
}
/*
* Next check the srb status
*/
switch( (le32_to_cpu(srbreply->srb_status))&0x3f){
case SRB_STATUS_ERROR_RECOVERY:
case SRB_STATUS_PENDING:
case SRB_STATUS_SUCCESS:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_DATA_OVERRUN:
switch(scsicmd->cmnd[0]){
case READ_6:
case WRITE_6:
case READ_10:
case WRITE_10:
case READ_12:
case WRITE_12:
case READ_16:
case WRITE_16:
if (le32_to_cpu(srbreply->data_xfer_length) < scsicmd->underflow) {
printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
} else {
printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
/*
* Next check the srb status
*/
switch ((le32_to_cpu(srbreply->srb_status))&0x3f) {
case SRB_STATUS_ERROR_RECOVERY:
case SRB_STATUS_PENDING:
case SRB_STATUS_SUCCESS:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_DATA_OVERRUN:
switch (scsicmd->cmnd[0]) {
case READ_6:
case WRITE_6:
case READ_10:
case WRITE_10:
case READ_12:
case WRITE_12:
case READ_16:
case WRITE_16:
if (le32_to_cpu(srbreply->data_xfer_length)
< scsicmd->underflow)
printk(KERN_WARNING"aacraid: SCSI CMD underflow\n");
else
printk(KERN_WARNING"aacraid: SCSI CMD Data Overrun\n");
scsicmd->result = DID_ERROR << 16
| COMMAND_COMPLETE << 8;
break;
case INQUIRY: {
scsicmd->result = DID_OK << 16
| COMMAND_COMPLETE << 8;
break;
}
default:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
break;
}
scsicmd->result = DID_ERROR << 16 | COMMAND_COMPLETE << 8;
break;
case INQUIRY: {
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
case SRB_STATUS_ABORTED:
scsicmd->result = DID_ABORT << 16 | ABORT << 8;
break;
}
default:
scsicmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
case SRB_STATUS_ABORT_FAILED:
/*
* Not sure about this one - but assuming the
* hba was trying to abort for some reason
*/
scsicmd->result = DID_ERROR << 16 | ABORT << 8;
break;
case SRB_STATUS_PARITY_ERROR:
scsicmd->result = DID_PARITY << 16
| MSG_PARITY_ERROR << 8;
break;
case SRB_STATUS_NO_DEVICE:
case SRB_STATUS_INVALID_PATH_ID:
case SRB_STATUS_INVALID_TARGET_ID:
case SRB_STATUS_INVALID_LUN:
case SRB_STATUS_SELECTION_TIMEOUT:
scsicmd->result = DID_NO_CONNECT << 16
| COMMAND_COMPLETE << 8;
break;
}
break;
case SRB_STATUS_ABORTED:
scsicmd->result = DID_ABORT << 16 | ABORT << 8;
break;
case SRB_STATUS_ABORT_FAILED:
// Not sure about this one - but assuming the hba was trying to abort for some reason
scsicmd->result = DID_ERROR << 16 | ABORT << 8;
break;
case SRB_STATUS_PARITY_ERROR:
scsicmd->result = DID_PARITY << 16 | MSG_PARITY_ERROR << 8;
break;
case SRB_STATUS_NO_DEVICE:
case SRB_STATUS_INVALID_PATH_ID:
case SRB_STATUS_INVALID_TARGET_ID:
case SRB_STATUS_INVALID_LUN:
case SRB_STATUS_SELECTION_TIMEOUT:
scsicmd->result = DID_NO_CONNECT << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_COMMAND_TIMEOUT:
case SRB_STATUS_TIMEOUT:
scsicmd->result = DID_TIME_OUT << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_COMMAND_TIMEOUT:
case SRB_STATUS_TIMEOUT:
scsicmd->result = DID_TIME_OUT << 16
| COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_BUSY:
scsicmd->result = DID_BUS_BUSY << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_BUSY:
scsicmd->result = DID_BUS_BUSY << 16
| COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_BUS_RESET:
scsicmd->result = DID_RESET << 16 | COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_BUS_RESET:
scsicmd->result = DID_RESET << 16
| COMMAND_COMPLETE << 8;
break;
case SRB_STATUS_MESSAGE_REJECTED:
scsicmd->result = DID_ERROR << 16 | MESSAGE_REJECT << 8;
break;
case SRB_STATUS_REQUEST_FLUSHED:
case SRB_STATUS_ERROR:
case SRB_STATUS_INVALID_REQUEST:
case SRB_STATUS_REQUEST_SENSE_FAILED:
case SRB_STATUS_NO_HBA:
case SRB_STATUS_UNEXPECTED_BUS_FREE:
case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
case SRB_STATUS_DELAYED_RETRY:
case SRB_STATUS_BAD_FUNCTION:
case SRB_STATUS_NOT_STARTED:
case SRB_STATUS_NOT_IN_USE:
case SRB_STATUS_FORCE_ABORT:
case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
default:
case SRB_STATUS_MESSAGE_REJECTED:
scsicmd->result = DID_ERROR << 16
| MESSAGE_REJECT << 8;
break;
case SRB_STATUS_REQUEST_FLUSHED:
case SRB_STATUS_ERROR:
case SRB_STATUS_INVALID_REQUEST:
case SRB_STATUS_REQUEST_SENSE_FAILED:
case SRB_STATUS_NO_HBA:
case SRB_STATUS_UNEXPECTED_BUS_FREE:
case SRB_STATUS_PHASE_SEQUENCE_FAILURE:
case SRB_STATUS_BAD_SRB_BLOCK_LENGTH:
case SRB_STATUS_DELAYED_RETRY:
case SRB_STATUS_BAD_FUNCTION:
case SRB_STATUS_NOT_STARTED:
case SRB_STATUS_NOT_IN_USE:
case SRB_STATUS_FORCE_ABORT:
case SRB_STATUS_DOMAIN_VALIDATION_FAIL:
default:
#ifdef AAC_DETAILED_STATUS_INFO
printk("aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
le32_to_cpu(srbreply->srb_status) & 0x3F,
aac_get_status_string(
le32_to_cpu(srbreply->srb_status) & 0x3F),
scsicmd->cmnd[0],
le32_to_cpu(srbreply->scsi_status));
printk(KERN_INFO "aacraid: SRB ERROR(%u) %s scsi cmd 0x%x - scsi status 0x%x\n",
le32_to_cpu(srbreply->srb_status) & 0x3F,
aac_get_status_string(
le32_to_cpu(srbreply->srb_status) & 0x3F),
scsicmd->cmnd[0],
le32_to_cpu(srbreply->scsi_status));
#endif
if ((scsicmd->cmnd[0] == ATA_12)
|| (scsicmd->cmnd[0] == ATA_16)) {
if (scsicmd->cmnd[2] & (0x01 << 5)) {
scsicmd->result = DID_OK << 16
| COMMAND_COMPLETE << 8;
if ((scsicmd->cmnd[0] == ATA_12)
|| (scsicmd->cmnd[0] == ATA_16)) {
if (scsicmd->cmnd[2] & (0x01 << 5)) {
scsicmd->result = DID_OK << 16
| COMMAND_COMPLETE << 8;
break;
} else {
scsicmd->result = DID_ERROR << 16
| COMMAND_COMPLETE << 8;
break;
}
} else {
scsicmd->result = DID_ERROR << 16
| COMMAND_COMPLETE << 8;
| COMMAND_COMPLETE << 8;
break;
}
} else {
scsicmd->result = DID_ERROR << 16
| COMMAND_COMPLETE << 8;
break;
}
}
if (le32_to_cpu(srbreply->scsi_status) == SAM_STAT_CHECK_CONDITION) {
int len;
scsicmd->result |= SAM_STAT_CHECK_CONDITION;
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
SCSI_SENSE_BUFFERSIZE);
if (le32_to_cpu(srbreply->scsi_status)
== SAM_STAT_CHECK_CONDITION) {
int len;
scsicmd->result |= SAM_STAT_CHECK_CONDITION;
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
SCSI_SENSE_BUFFERSIZE);
#ifdef AAC_DETAILED_STATUS_INFO
printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
le32_to_cpu(srbreply->status), len);
printk(KERN_WARNING "aac_srb_callback: check condition, status = %d len=%d\n",
le32_to_cpu(srbreply->status), len);
#endif
memcpy(scsicmd->sense_buffer, srbreply->sense_data, len);
memcpy(scsicmd->sense_buffer,
srbreply->sense_data, len);
}
}
/*
* OR in the scsi status (already shifted up a bit)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7