[POWERPC] Create common fsl pci/e files based on 86xx platforms

Move
arch/powerpc/platforms/86xx/pci.c -> arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pcie.h -> arch/powerpc/sysdev/fsl_pci.h
as the base to unify 83xx/85xx/86xx pci and pcie.

Add CONFIG_FSL_PCI to build fsl_pci.c for Freescale pci and pcie option.
The code still works for 86xx platforms.
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/Kconfig

@@ -425,6 +425,10 @@ config SBUS
 config FSL_SOC
 	bool
 
+config FSL_PCI
+ 	bool
+	select PPC_INDIRECT_PCI
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool

arch/powerpc/platforms/86xx/Kconfig

@@ -14,8 +14,8 @@ endchoice
 
 config MPC8641
 	bool
-	select PPC_INDIRECT_PCI
-	select PPC_INDIRECT_PCI_BE
+	select PPC_INDIRECT_PCI_BE if PCI
+	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
 	default y if MPC8641_HPCN

arch/powerpc/platforms/86xx/Makefile

@@ -4,4 +4,3 @@
 
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
-obj-$(CONFIG_PCI)		+= pci.o

arch/powerpc/sysdev/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
 mv64x60-$(CONFIG_PCI)		+= mv64x60_pci.o

arch/powerpc/platforms/86xx/pci.c → arch/powerpc/sysdev/fsl_pci.c

@@ -24,9 +24,9 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #include <sysdev/fsl_soc.h>
-#include <sysdev/fsl_pcie.h>
+#include <sysdev/fsl_pci.h>
 
-#include "mpc86xx.h"
+#include "../platforms/86xx/mpc86xx.h"
 
 #undef DEBUG