Commit 5614942b authored by Istvan Varga's avatar Istvan Varga Committed by Mauro Carvalho Chehab

[media] xc4000: added mutex

This patch adds a mutex to xc4000_priv, to protect the driver
from being accessed by multiple processes at the same time.
Signed-off-by: default avatarIstvan Varga <istvan_v@mailbox.hu>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent f0ef7c88
......@@ -28,6 +28,7 @@
#include <linux/delay.h>
#include <linux/dvb/frontend.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <asm/unaligned.h>
#include "dvb_frontend.h"
......@@ -90,6 +91,7 @@ struct xc4000_priv {
struct firmware_properties cur_fw;
__u16 hwmodel;
__u16 hwvers;
struct mutex lock;
};
/* Misc Defines */
......@@ -1145,10 +1147,12 @@ static int xc4000_set_params(struct dvb_frontend *fe,
{
struct xc4000_priv *priv = fe->tuner_priv;
unsigned int type;
int ret;
int ret = -EREMOTEIO;
dprintk(1, "%s() frequency=%d (Hz)\n", __func__, params->frequency);
mutex_lock(&priv->lock);
if (fe->ops.info.type == FE_ATSC) {
dprintk(1, "%s() ATSC\n", __func__);
switch (params->u.vsb.modulation) {
......@@ -1172,7 +1176,8 @@ static int xc4000_set_params(struct dvb_frontend *fe,
type = DTV6;
break;
default:
return -EINVAL;
ret = -EINVAL;
goto fail;
}
} else if (fe->ops.info.type == FE_OFDM) {
dprintk(1, "%s() OFDM\n", __func__);
......@@ -1208,28 +1213,29 @@ static int xc4000_set_params(struct dvb_frontend *fe,
break;
default:
printk(KERN_ERR "xc4000 bandwidth not set!\n");
return -EINVAL;
ret = -EINVAL;
goto fail;
}
priv->rf_mode = XC_RF_MODE_AIR;
} else {
printk(KERN_ERR "xc4000 modulation type not supported!\n");
return -EINVAL;
ret = -EINVAL;
goto fail;
}
dprintk(1, "%s() frequency=%d (compensated)\n",
__func__, priv->freq_hz);
/* Make sure the correct firmware type is loaded */
if (check_firmware(fe, type, 0, priv->if_khz) != XC_RESULT_SUCCESS) {
return -EREMOTEIO;
}
if (check_firmware(fe, type, 0, priv->if_khz) != XC_RESULT_SUCCESS)
goto fail;
ret = xc_SetSignalSource(priv, priv->rf_mode);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR
"xc4000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
return -EREMOTEIO;
"xc4000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
goto fail;
}
ret = xc_SetTVStandard(priv,
......@@ -1237,33 +1243,32 @@ static int xc4000_set_params(struct dvb_frontend *fe,
XC4000_Standard[priv->video_standard].AudioMode);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR "xc4000: xc_SetTVStandard failed\n");
return -EREMOTEIO;
}
#ifdef DJH_DEBUG
ret = xc_set_IF_frequency(priv, priv->if_khz);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR "xc4000: xc_Set_IF_frequency(%d) failed\n",
priv->if_khz);
return -EIO;
goto fail;
}
#endif
xc_tune_channel(priv, priv->freq_hz, XC_TUNE_DIGITAL);
if (debug)
xc_debug_dump(priv);
return 0;
ret = 0;
fail:
mutex_unlock(&priv->lock);
return ret;
}
static int xc4000_set_analog_params(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct xc4000_priv *priv = fe->tuner_priv;
int ret;
int ret = -EREMOTEIO;
dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n",
__func__, params->frequency);
mutex_lock(&priv->lock);
/* Fix me: it could be air. */
priv->rf_mode = params->mode;
if (params->mode > XC_RF_MODE_CABLE)
......@@ -1318,16 +1323,15 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe,
tune_channel:
/* FIXME - firmware type not being set properly */
if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) {
return -EREMOTEIO;
}
if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS)
goto fail;
ret = xc_SetSignalSource(priv, priv->rf_mode);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR
"xc4000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
return -EREMOTEIO;
"xc4000: xc_SetSignalSource(%d) failed\n",
priv->rf_mode);
goto fail;
}
ret = xc_SetTVStandard(priv,
......@@ -1335,7 +1339,7 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe,
XC4000_Standard[priv->video_standard].AudioMode);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR "xc4000: xc_SetTVStandard failed\n");
return -EREMOTEIO;
goto fail;
}
xc_tune_channel(priv, priv->freq_hz, XC_TUNE_ANALOG);
......@@ -1343,7 +1347,12 @@ static int xc4000_set_analog_params(struct dvb_frontend *fe,
if (debug)
xc_debug_dump(priv);
return 0;
ret = 0;
fail:
mutex_unlock(&priv->lock);
return ret;
}
static int xc4000_get_frequency(struct dvb_frontend *fe, u32 *freq)
......@@ -1368,8 +1377,12 @@ static int xc4000_get_status(struct dvb_frontend *fe, u32 *status)
struct xc4000_priv *priv = fe->tuner_priv;
u16 lock_status = 0;
mutex_lock(&priv->lock);
xc_get_lock_status(priv, &lock_status);
mutex_unlock(&priv->lock);
dprintk(1, "%s() lock_status = 0x%08x\n", __func__, lock_status);
*status = lock_status;
......@@ -1386,9 +1399,13 @@ static int xc4000_sleep(struct dvb_frontend *fe)
static int xc4000_init(struct dvb_frontend *fe)
{
struct xc4000_priv *priv = fe->tuner_priv;
int ret;
dprintk(1, "%s()\n", __func__);
if (check_firmware(fe, DTV8, 0, priv->if_khz) != XC_RESULT_SUCCESS) {
mutex_lock(&priv->lock);
ret = check_firmware(fe, DTV8, 0, priv->if_khz);
mutex_unlock(&priv->lock);
if (ret != XC_RESULT_SUCCESS) {
printk(KERN_ERR "xc4000: Unable to initialise tuner\n");
return -EREMOTEIO;
}
......@@ -1460,6 +1477,7 @@ struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
case 1:
/* new tuner instance */
priv->bandwidth = BANDWIDTH_6_MHZ;
mutex_init(&priv->lock);
fe->tuner_priv = priv;
break;
default:
......@@ -1511,7 +1529,9 @@ struct dvb_frontend *xc4000_attach(struct dvb_frontend *fe,
/* FIXME: For now, load the firmware at startup. We will remove this
before the code goes to production... */
mutex_lock(&priv->lock);
check_firmware(fe, DTV8, 0, priv->if_khz);
mutex_unlock(&priv->lock);
return fe;
fail:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment