Commit 56838644 authored by Manivannan Sadhasivam's avatar Manivannan Sadhasivam Committed by Shawn Guo

arm64: dts: freescale: Add support for i.MX8QXP AI_ML board

Add support for i.MX8QXP AI_ML board from Einfochips. This board is one
of the Consumer Edition boards of the 96Boards family based on i.MX8QXP
SoC from NXP/Freescale.

The initial support includes following peripherals which are tested and
known to be working:

1. Debug serial via UART2
2. uSD
3. WiFi
4. Ethernet

More information about this board can be found in Arrow website:
https://www.arrow.com/en/products/imx8-ai-ml/arrow-development-toolsSigned-off-by: default avatarManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: default avatarDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent b5547e22
......@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 Einfochips
* Copyright 2019 Linaro Ltd.
*/
/dts-v1/;
#include "imx8qxp.dtsi"
/ {
model = "Einfochips i.MX8QXP AI_ML";
compatible = "einfochips,imx8qxp-ai_ml", "fsl,imx8qxp";
aliases {
serial1 = &adma_lpuart1;
serial2 = &adma_lpuart2;
serial3 = &adma_lpuart3;
};
chosen {
stdout-path = &adma_lpuart2;
};
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x80000000>;
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
user-led1 {
label = "green:user1";
gpios = <&lsio_gpio4 16 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
user-led2 {
label = "green:user2";
gpios = <&lsio_gpio0 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
};
user-led3 {
label = "green:user3";
gpios = <&lsio_gpio0 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};
user-led4 {
label = "green:user4";
gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
panic-indicator;
linux,default-trigger = "none";
};
wlan-active-led {
label = "yellow:wlan";
gpios = <&lsio_gpio4 17 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};
bt-active-led {
label = "blue:bt";
gpios = <&lsio_gpio4 18 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "hci0-power";
default-state = "off";
};
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_reg_on>;
reset-gpios = <&lsio_gpio3 24 GPIO_ACTIVE_LOW>;
};
};
/* BT */
&adma_lpuart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart0>;
uart-has-rtscts;
status = "okay";
};
/* LS-UART0 */
&adma_lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart1>;
status = "okay";
};
/* Debug */
&adma_lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart2>;
status = "okay";
};
/* PCI-E UART */
&adma_lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpuart3>;
status = "okay";
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
};
};
/* WiFi */
&usdhc1 {
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
no-sd;
non-removable;
mmc-pwrseq = <&sdio_pwrseq>;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD */
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
bus-width = <4>;
cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
status = "okay";
};
&iomuxc {
pinctrl_fec1: fec1grp {
fsl,pins = <
IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
pinctrl_leds: ledsgrp{
fsl,pins = <
IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021
IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021
IMX8QXP_EMMC0_DATA7_LSIO_GPIO4_IO16 0x00000021
IMX8QXP_USDHC1_WP_LSIO_GPIO4_IO21 0x00000021
IMX8QXP_EMMC0_STROBE_LSIO_GPIO4_IO17 0x00000021
IMX8QXP_EMMC0_RESET_B_LSIO_GPIO4_IO18 0x00000021
>;
};
pinctrl_lpuart0: lpuart0grp {
fsl,pins = <
IMX8QXP_UART0_RX_ADMA_UART0_RX 0X06000020
IMX8QXP_UART0_TX_ADMA_UART0_TX 0X06000020
IMX8QXP_FLEXCAN0_TX_ADMA_UART0_CTS_B 0x06000020
IMX8QXP_FLEXCAN0_RX_ADMA_UART0_RTS_B 0x06000020
>;
};
pinctrl_lpuart1: lpuart1grp {
fsl,pins = <
IMX8QXP_UART1_RX_ADMA_UART1_RX 0X06000020
IMX8QXP_UART1_TX_ADMA_UART1_TX 0X06000020
>;
};
pinctrl_lpuart2: lpuart2grp {
fsl,pins = <
IMX8QXP_UART2_RX_ADMA_UART2_RX 0X06000020
IMX8QXP_UART2_TX_ADMA_UART2_TX 0X06000020
>;
};
pinctrl_lpuart3: lpuart3grp {
fsl,pins = <
IMX8QXP_FLEXCAN2_RX_ADMA_UART3_RX 0X06000020
IMX8QXP_FLEXCAN2_TX_ADMA_UART3_TX 0X06000020
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
IMX8QXP_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000021
>;
};
pinctrl_wifi_reg_on: wifiregongrp {
fsl,pins = <
IMX8QXP_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000021
>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment