PCI: cadence: Use INTX instead of legacy

In the Cadence endpoint controller driver, rename the function
cdns_pcie_ep_send_legacy_irq() to cdns_pcie_ep_send_intx_irq() to match
the macro PCI_IRQ_INTX name. Related comments and messages mentioning
"legacy" are also changed to refer to "intx".

Link: https://lore.kernel.org/r/20231122060406.14695-9-dlemoal@kernel.orgSigned-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

drivers/pci/controller/cadence/pcie-cadence-ep.c

@@ -360,8 +360,8 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn, u8 intx,
 	writel(0, ep->irq_cpu_addr + offset);
 }
 
-static int cdns_pcie_ep_send_legacy_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
-					u8 intx)
+static int cdns_pcie_ep_send_intx_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
+				      u8 intx)
 {
 	u16 cmd;
 
@@ -371,7 +371,7 @@ static int cdns_pcie_ep_send_legacy_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
 
 	cdns_pcie_ep_assert_intx(ep, fn, intx, true);
 	/*
-	 * The mdelay() value was taken from dra7xx_pcie_raise_legacy_irq()
+	 * The mdelay() value was taken from dra7xx_pcie_raise_intx_irq()
 	 */
 	mdelay(1);
 	cdns_pcie_ep_assert_intx(ep, fn, intx, false);
@@ -541,10 +541,10 @@ static int cdns_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn, u8 vfn,
 	switch (type) {
 	case PCI_IRQ_INTX:
 		if (vfn > 0) {
-			dev_err(dev, "Cannot raise legacy interrupts for VF\n");
+			dev_err(dev, "Cannot raise INTX interrupts for VF\n");
 			return -EINVAL;
 		}
-		return cdns_pcie_ep_send_legacy_irq(ep, fn, vfn, 0);
+		return cdns_pcie_ep_send_intx_irq(ep, fn, vfn, 0);
 
 	case PCI_IRQ_MSI:
 		return cdns_pcie_ep_send_msi_irq(ep, fn, vfn, interrupt_num);

drivers/pci/controller/cadence/pcie-cadence.h

@@ -347,16 +347,16 @@ struct cdns_pcie_epf {
  * @max_regions: maximum number of regions supported by hardware
  * @ob_region_map: bitmask of mapped outbound regions
  * @ob_addr: base addresses in the AXI bus where the outbound regions start
- * @irq_phys_addr: base address on the AXI bus where the MSI/legacy IRQ
+ * @irq_phys_addr: base address on the AXI bus where the MSI/INTX IRQ
  *		   dedicated outbound regions is mapped.
  * @irq_cpu_addr: base address in the CPU space where a write access triggers
- *		  the sending of a memory write (MSI) / normal message (legacy
+ *		  the sending of a memory write (MSI) / normal message (INTX
  *		  IRQ) TLP through the PCIe bus.
- * @irq_pci_addr: used to save the current mapping of the MSI/legacy IRQ
+ * @irq_pci_addr: used to save the current mapping of the MSI/INTX IRQ
  *		  dedicated outbound region.
  * @irq_pci_fn: the latest PCI function that has updated the mapping of
- *		the MSI/legacy IRQ dedicated outbound region.
- * @irq_pending: bitmask of asserted legacy IRQs.
+ *		the MSI/INTX IRQ dedicated outbound region.
+ * @irq_pending: bitmask of asserted INTX IRQs.
  * @lock: spin lock to disable interrupts while modifying PCIe controller
  *        registers fields (RMW) accessible by both remote RC and EP to
  *        minimize time between read and write
@@ -374,7 +374,7 @@ struct cdns_pcie_ep {
 	u64			irq_pci_addr;
 	u8			irq_pci_fn;
 	u8			irq_pending;
-	/* protect writing to PCI_STATUS while raising legacy interrupts */
+	/* protect writing to PCI_STATUS while raising INTX interrupts */
 	spinlock_t		lock;
 	struct cdns_pcie_epf	*epf;
 	unsigned int		quirk_detect_quiet_flag:1;