[PATCH] ata_piix: convert pata to new reset mechanism

Convert ata_piix pata ->phy_reset to new reset mechanism.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/scsi/ata_piix.c

@@ -131,7 +131,7 @@ enum {
 static int piix_init_one (struct pci_dev *pdev,
 				    const struct pci_device_id *ent);
 
-static void piix_pata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
 static void piix_sata_phy_reset(struct ata_port *ap);
 static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
@@ -207,7 +207,7 @@ static const struct ata_port_operations piix_pata_ops = {
 	.exec_command		= ata_exec_command,
 	.dev_select		= ata_std_dev_select,
 
-	.phy_reset		= piix_pata_phy_reset,
+	.probe_reset		= piix_pata_probe_reset,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -258,8 +258,7 @@ static struct ata_port_info piix_port_info[] = {
 	/* ich5_pata */
 	{
 		.sht		= &piix_sht,
-		.host_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
-				  PIIX_FLAG_CHECKINTR,
+		.host_flags	= ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 #if 0
 		.mwdma_mask	= 0x06, /* mwdma1-2 */
@@ -284,7 +283,7 @@ static struct ata_port_info piix_port_info[] = {
 	/* piix4_pata */
 	{
 		.sht		= &piix_sht,
-		.host_flags	= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+		.host_flags	= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 #if 0
 		.mwdma_mask	= 0x06, /* mwdma1-2 */
@@ -366,30 +365,42 @@ static void piix_pata_cbl_detect(struct ata_port *ap)
 }
 
 /**
- *	piix_pata_phy_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
+ *	piix_pata_probeinit - probeinit for PATA host controller
+ *	@ap: Target port
  *
- *	Probe PATA phy.
+ *	Probeinit including cable detection.
  *
  *	LOCKING:
  *	None (inherited from caller).
  */
+static void piix_pata_probeinit(struct ata_port *ap)
+{
+	piix_pata_cbl_detect(ap);
+	ata_std_probeinit(ap);
+}
 
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ *	piix_pata_probe_reset - Perform reset on PATA port and classify
+ *	@ap: Port to reset
+ *	@classes: Resulting classes of attached devices
+ *
+ *	Reset PATA phy and classify attached devices.
+ *
+ *	LOCKING:
+ *	None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
 
 	if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
-		ata_port_disable(ap);
 		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
-		return;
+		return 0;
 	}
 
-	piix_pata_cbl_detect(ap);
-
-	ata_port_probe(ap);
-
-	ata_bus_reset(ap);
+	return ata_drive_probe_reset(ap, piix_pata_probeinit,
+				     ata_std_softreset, NULL,
+				     ata_std_postreset, classes);
 }
 
 /**