wifi: rtw89: pci: update SER timer unit and timeout time

Be higher resolution of SER timer unit from 32ms to 16ms to detect
abnormal situation more accurately, and set hardware watchdog timer to 4ms.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240121071826.10159-2-pkshih@realtek.com

drivers/net/wireless/realtek/rtw89/pci_be.c

@@ -105,6 +105,10 @@ static void rtw89_pci_ctrl_trxdma_pcie_be(struct rtw89_dev *rtwdev,
 		val |= B_BE_STOP_AXI_MST;
 
 	rtw89_write32(rtwdev, R_BE_HAXI_INIT_CFG1, val);
+
+	if (io_en == MAC_AX_PCIE_ENABLE)
+		rtw89_write32_mask(rtwdev, R_BE_HAXI_MST_WDT_TIMEOUT_SEL_V1,
+				   B_BE_HAXI_MST_WDT_TIMEOUT_SEL_MASK, 4);
 }
 
 static void rtw89_pci_clr_idx_all_be(struct rtw89_dev *rtwdev)
@@ -257,6 +261,7 @@ static void rtw89_pci_ser_setting_be(struct rtw89_dev *rtwdev)
 	rtw89_write32(rtwdev, R_BE_PL1_DBG_INFO, 0x0);
 	rtw89_write32_set(rtwdev, R_BE_FWS1IMR, B_BE_PCIE_SER_TIMEOUT_INDIC_EN);
 	rtw89_write32_set(rtwdev, R_BE_SER_PL1_CTRL, B_BE_PL1_SER_PL1_EN);
+	rtw89_write32_mask(rtwdev, R_BE_SER_PL1_CTRL, B_BE_PL1_TIMER_UNIT_MASK, 1);
 
 	val32 = rtw89_read32(rtwdev, R_BE_REG_PL1_MASK);
 	val32 |= B_BE_SER_PMU_IMR | B_BE_SER_L1SUB_IMR | B_BE_SER_PM_MASTER_IMR |

drivers/net/wireless/realtek/rtw89/reg.h

@@ -5800,6 +5800,9 @@
 #define B_BE_STOP_CH1 BIT(1)
 #define B_BE_STOP_CH0 BIT(0)
 
+#define R_BE_HAXI_MST_WDT_TIMEOUT_SEL_V1 0xB02C
+#define B_BE_HAXI_MST_WDT_TIMEOUT_SEL_MASK GENMASK(4, 0)
+
 #define R_BE_HAXI_IDCT_MSK 0xB0B8
 #define B_BE_HAXI_RRESP_ERR_IDCT_MSK BIT(7)
 #define B_BE_HAXI_BRESP_ERR_IDCT_MSK BIT(6)