Commit 57ce6466 authored by Badhri Jagan Sridharan's avatar Badhri Jagan Sridharan Committed by Greg Kroah-Hartman

usb: typec: tcpci: update ROLE_CONTROL for DRP

ROLE_CONTROL register would not have the actual CC terminations
unless the port does not set ROLE_CONTROL.DRP. For DRP ports,
CC_STATUS.cc1/cc2 indicates the final terminations applied
when TCPC enters potential_connect_as_source/_sink.
For DRP ports, infer port role from CC_STATUS and set corresponding
CC terminations before setting the orientation.
Reviewed-by: default avatarHeikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: default avatarBadhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20200901025927.3596190-4-badhri@google.comSigned-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 19b65476
......@@ -191,12 +191,47 @@ static int tcpci_set_polarity(struct tcpc_dev *tcpc,
struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
unsigned int reg;
int ret;
enum typec_cc_status cc1, cc2;
/* Keep the disconnect cc line open */
/* Obtain Rp setting from role control */
ret = regmap_read(tcpci->regmap, TCPC_ROLE_CTRL, &reg);
if (ret < 0)
return ret;
ret = tcpci_get_cc(tcpc, &cc1, &cc2);
if (ret < 0)
return ret;
/*
* When port has drp toggling enabled, ROLE_CONTROL would only have the initial
* terminations for the toggling and does not indicate the final cc
* terminations when ConnectionResult is 0 i.e. drp toggling stops and
* the connection is resolbed. Infer port role from TCPC_CC_STATUS based on the
* terminations seen. The port role is then used to set the cc terminations.
*/
if (reg & TCPC_ROLE_CTRL_DRP) {
/* Disable DRP for the OPEN setting to take effect */
reg = reg & ~TCPC_ROLE_CTRL_DRP;
if (polarity == TYPEC_POLARITY_CC2) {
reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
/* Local port is source */
if (cc2 == TYPEC_CC_RD)
/* Role control would have the Rp setting when DRP was enabled */
reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC2_SHIFT;
else
reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT;
} else {
reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
/* Local port is source */
if (cc1 == TYPEC_CC_RD)
/* Role control would have the Rp setting when DRP was enabled */
reg |= TCPC_ROLE_CTRL_CC_RP << TCPC_ROLE_CTRL_CC1_SHIFT;
else
reg |= TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT;
}
}
if (polarity == TYPEC_POLARITY_CC2)
reg |= TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT;
else
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment