net: phy: broadcom: Rename LED registers

These registers are common to most PHYs and are not specific to the
BCM5482, renamed the constants accordingly, no functional change.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c

@@ -414,13 +414,13 @@ static int bcm54xx_config_init(struct phy_device *phydev)
 	 * these settings will cause LOS to malfunction.
 	 */
 	if (!phy_on_sfp(phydev)) {
-		val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
-			BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
-		bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
+		val = BCM54XX_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
+		bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDS1, val);
 
 		val = BCM_LED_MULTICOLOR_IN_PHASE |
-			BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
-			BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
+			BCM54XX_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
+			BCM54XX_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
 		bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
 	}
 

include/linux/brcmphy.h

@@ -206,11 +206,11 @@
 #define  BCM_NO_ANEG_APD_EN		0x0060 /* bits 5 & 6 */
 #define  BCM_APD_SINGLELP_EN	0x0100 /* Bit 8 */
 
-#define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
+#define BCM54XX_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
-#define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
+#define BCM54XX_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
 					/* LED1 / ~LINKSPD[1] selector */
-#define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM54XX_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
 #define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
 #define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
 #define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */