arm64: dts: tqma8m*: Fix temperature sensor compatible

Use the correct compatible 'nxp,se97b' as it is an SE97BTP chip.
While at it, fix the node name according to device tree spec
recommendations. The EEPROM is a separate node anyway.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi

@@ -87,8 +87,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi

@@ -77,8 +77,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts

@@ -447,9 +447,8 @@ &i2c2 {
 	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97_1c: temperature-sensor-eeprom@1c {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97_1c: temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1c>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi

@@ -63,9 +63,8 @@ &i2c1 {
 	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	/* NXP SE97BTP with temperature sensor + eeprom */
-	se97: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	se97: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 

arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi

@@ -194,8 +194,8 @@ vgen6_reg: vgen6 {
 		};
 	};
 
-	sensor0: temperature-sensor-eeprom@1b {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor0: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1b>;
 	};
 

arch/arm64/boot/dts/freescale/mba8mx.dtsi

@@ -206,8 +206,8 @@ tlv320aic3x04: audio-codec@18 {
 		ldoin-supply = <&reg_vcc_3v3>;
 	};
 
-	sensor1: sensor@1f {
-		compatible = "nxp,se97", "jedec,jc-42.4-temp";
+	sensor1: temperator-sensor@1f {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
 		reg = <0x1f>;
 	};