drm/amd/display: Enable power gating before init_pipes

[Why]
In init_hw() we call init_pipes() before enabling power gating.
init_pipes() tries to power gate dsc but it may fail because
required force-ons are not released yet.
As a result with dsc config the following errors observed on resume:
"REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control"
"REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control"

[How]
Move enable_power_gating_plane() before init_pipes() in init_hw()
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Reviewed-by: Eric Yang <Eric.Yang2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -1500,6 +1500,9 @@ void dcn10_init_hw(struct dc *dc)
 	/* we want to turn off all dp displays before doing detection */
 	dc_link_blank_all_dp_displays(dc);
 
+	if (hws->funcs.enable_power_gating_plane)
+		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
+
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
 	 * pipes we want to use.
@@ -1552,8 +1555,6 @@ void dcn10_init_hw(struct dc *dc)
 
 		REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);
 	}
-	if (hws->funcs.enable_power_gating_plane)
-		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
 
 	if (dc->clk_mgr->funcs->notify_wm_ranges)
 		dc->clk_mgr->funcs->notify_wm_ranges(dc->clk_mgr);

drivers/gpu/drm/amd/display/dc/dcn30/dcn30_hwseq.c

@@ -547,6 +547,9 @@ void dcn30_init_hw(struct dc *dc)
 	/* we want to turn off all dp displays before doing detection */
 	dc_link_blank_all_dp_displays(dc);
 
+	if (hws->funcs.enable_power_gating_plane)
+		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
+
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
 	 * pipes we want to use.
@@ -624,8 +627,6 @@ void dcn30_init_hw(struct dc *dc)
 
 		REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);
 	}
-	if (hws->funcs.enable_power_gating_plane)
-		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
 
 	if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks)
 		dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub);

drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c

@@ -199,6 +199,9 @@ void dcn31_init_hw(struct dc *dc)
 	/* we want to turn off all dp displays before doing detection */
 	dc_link_blank_all_dp_displays(dc);
 
+	if (hws->funcs.enable_power_gating_plane)
+		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
+
 	/* If taking control over from VBIOS, we may want to optimize our first
 	 * mode set, so we need to skip powering down pipes until we know which
 	 * pipes we want to use.
@@ -248,8 +251,6 @@ void dcn31_init_hw(struct dc *dc)
 
 		REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);
 	}
-	if (hws->funcs.enable_power_gating_plane)
-		hws->funcs.enable_power_gating_plane(dc->hwseq, true);
 
 	if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks)
 		dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub);