Commit 592d3651 authored by Chris Mi's avatar Chris Mi Committed by Saeed Mahameed

net/mlx5e: Parse mirroring action for offloaded TC eswitch flows

Currently, we only support the mirred redirect TC sub-action. In order
to support flow based vport mirroring, add support to parse the mirred
mirror sub-action.

For mirroring, user-space will typically set the action order such that
the mirror port (mirror VF) sees packets as the original port (VF under
mirroring) sent them or as it will receive them.

In the general case, it means that packets are potentially sent to the
mirror port before or after some actions were applied on them. To
properly do that, we should follow on the exact action order as set for
the flow and make sure this will also be the case when we program the HW
offload.

We introduce a counter for the output ports (attr->out_count), which we
increase when parsing each mirred redirect/mirror sub-action and when
dealing with encap.

We introduce a counter (attr->mirror_count) telling us if split is
needed. If no split is needed and mirroring is just multicasting to
vport, the mirror count is zero, all the actions of the TC flow should
apply on that single HW flow.

If split is needed, the mirror count tells where to do the split, all
non-mirred tc actions should apply only after the split.

The mirror count is set while parsing the following actions encap/decap,
header re-write, vlan push/pop.
Signed-off-by: default avatarChris Mi <chrism@mellanox.com>
Reviewed-by: default avatarPaul Blakey <paulb@mellanox.com>
Reviewed-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: default avatarSaeed Mahameed <saeedm@mellanox.com>
parent a842dd04
......@@ -844,8 +844,8 @@ mlx5e_tc_add_fdb_flow(struct mlx5e_priv *priv,
}
out_priv = netdev_priv(encap_dev);
rpriv = out_priv->ppriv;
attr->out_rep = rpriv->rep;
attr->out_mdev = out_priv->mdev;
attr->out_rep[attr->out_count] = rpriv->rep;
attr->out_mdev[attr->out_count++] = out_priv->mdev;
}
err = mlx5_eswitch_add_vlan_action(esw, attr);
......@@ -2537,6 +2537,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
return err;
action |= MLX5_FLOW_CONTEXT_ACTION_MOD_HDR;
attr->mirror_count = attr->out_count;
continue;
}
......@@ -2548,12 +2549,18 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
return -EOPNOTSUPP;
}
if (is_tcf_mirred_egress_redirect(a)) {
struct net_device *out_dev;
if (is_tcf_mirred_egress_redirect(a) || is_tcf_mirred_egress_mirror(a)) {
struct mlx5e_priv *out_priv;
struct net_device *out_dev;
out_dev = tcf_mirred_dev(a);
if (attr->out_count >= MLX5_MAX_FLOW_FWD_VPORTS) {
pr_err("can't support more than %d output ports, can't offload forwarding\n",
attr->out_count);
return -EOPNOTSUPP;
}
if (switchdev_port_same_parent_id(priv->netdev,
out_dev) ||
is_merged_eswitch_dev(priv, out_dev)) {
......@@ -2561,8 +2568,8 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
MLX5_FLOW_CONTEXT_ACTION_COUNT;
out_priv = netdev_priv(out_dev);
rpriv = out_priv->ppriv;
attr->out_rep = rpriv->rep;
attr->out_mdev = out_priv->mdev;
attr->out_rep[attr->out_count] = rpriv->rep;
attr->out_mdev[attr->out_count++] = out_priv->mdev;
} else if (encap) {
parse_attr->mirred_ifindex = out_dev->ifindex;
parse_attr->tun_info = *info;
......@@ -2585,6 +2592,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
encap = true;
else
return -EOPNOTSUPP;
attr->mirror_count = attr->out_count;
continue;
}
......@@ -2606,6 +2614,7 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
} else { /* action is TCA_VLAN_ACT_MODIFY */
return -EOPNOTSUPP;
}
attr->mirror_count = attr->out_count;
continue;
}
......@@ -2621,6 +2630,11 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
if (!actions_match_supported(priv, exts, parse_attr, flow))
return -EOPNOTSUPP;
if (attr->out_count > 1 && !mlx5_esw_has_fwd_fdb(priv->mdev)) {
netdev_warn_once(priv->netdev, "current firmware doesn't support split rule for port mirroring\n");
return -EOPNOTSUPP;
}
return 0;
}
......
......@@ -239,12 +239,18 @@ enum mlx5_flow_match_level {
MLX5_MATCH_L4 = MLX5_INLINE_MODE_TCP_UDP,
};
/* current maximum for flow based vport multicasting */
#define MLX5_MAX_FLOW_FWD_VPORTS 2
struct mlx5_esw_flow_attr {
struct mlx5_eswitch_rep *in_rep;
struct mlx5_eswitch_rep *out_rep;
struct mlx5_core_dev *out_mdev;
struct mlx5_eswitch_rep *out_rep[MLX5_MAX_FLOW_FWD_VPORTS];
struct mlx5_core_dev *out_mdev[MLX5_MAX_FLOW_FWD_VPORTS];
struct mlx5_core_dev *in_mdev;
int mirror_count;
int out_count;
int action;
__be16 vlan_proto;
u16 vlan_vid;
......
......@@ -48,12 +48,12 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
struct mlx5_flow_spec *spec,
struct mlx5_esw_flow_attr *attr)
{
struct mlx5_flow_destination dest[2] = {};
struct mlx5_flow_destination dest[MLX5_MAX_FLOW_FWD_VPORTS + 1] = {};
struct mlx5_flow_act flow_act = {0};
struct mlx5_fc *counter = NULL;
struct mlx5_flow_handle *rule;
int j, i = 0;
void *misc;
int i = 0;
if (esw->mode != SRIOV_OFFLOADS)
return ERR_PTR(-EOPNOTSUPP);
......@@ -70,14 +70,16 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
}
if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) {
dest[i].type = MLX5_FLOW_DESTINATION_TYPE_VPORT;
dest[i].vport.num = attr->out_rep->vport;
if (MLX5_CAP_ESW(esw->dev, merged_eswitch)) {
dest[i].vport.vhca_id =
MLX5_CAP_GEN(attr->out_mdev, vhca_id);
dest[i].vport.vhca_id_valid = 1;
for (j = attr->mirror_count; j < attr->out_count; j++) {
dest[i].type = MLX5_FLOW_DESTINATION_TYPE_VPORT;
dest[i].vport.num = attr->out_rep[j]->vport;
if (MLX5_CAP_ESW(esw->dev, merged_eswitch)) {
dest[i].vport.vhca_id =
MLX5_CAP_GEN(attr->out_mdev[j], vhca_id);
dest[i].vport.vhca_id_valid = 1;
}
i++;
}
i++;
}
if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_COUNT) {
counter = mlx5_fc_create(esw->dev, true);
......@@ -173,7 +175,7 @@ esw_vlan_action_get_vport(struct mlx5_esw_flow_attr *attr, bool push, bool pop)
struct mlx5_eswitch_rep *in_rep, *out_rep, *vport = NULL;
in_rep = attr->in_rep;
out_rep = attr->out_rep;
out_rep = attr->out_rep[0];
if (push)
vport = in_rep;
......@@ -194,7 +196,7 @@ static int esw_add_vlan_action_check(struct mlx5_esw_flow_attr *attr,
goto out_notsupp;
in_rep = attr->in_rep;
out_rep = attr->out_rep;
out_rep = attr->out_rep[0];
if (push && in_rep->vport == FDB_UPLINK_VPORT)
goto out_notsupp;
......@@ -245,7 +247,7 @@ int mlx5_eswitch_add_vlan_action(struct mlx5_eswitch *esw,
if (!push && !pop && fwd) {
/* tracks VF --> wire rules without vlan push action */
if (attr->out_rep->vport == FDB_UPLINK_VPORT) {
if (attr->out_rep[0]->vport == FDB_UPLINK_VPORT) {
vport->vlan_refcount++;
attr->vlan_handled = true;
}
......@@ -305,7 +307,7 @@ int mlx5_eswitch_del_vlan_action(struct mlx5_eswitch *esw,
if (!push && !pop && fwd) {
/* tracks VF --> wire rules without vlan push action */
if (attr->out_rep->vport == FDB_UPLINK_VPORT)
if (attr->out_rep[0]->vport == FDB_UPLINK_VPORT)
vport->vlan_refcount--;
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment