x86/ftrace: Have ftrace trampolines turn read-only at the end of system boot up

Booting one of my machines, it triggered the following crash:

 Kernel/User page tables isolation: enabled
 ftrace: allocating 36577 entries in 143 pages
 Starting tracer 'function'
 BUG: unable to handle page fault for address: ffffffffa000005c
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0003) - permissions violation
 PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
 Oops: 0003 [#1] PREEMPT SMP PTI
 CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 RIP: 0010:text_poke_early+0x4a/0x58
 Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
 RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
 RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
 RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
 RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
 R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
 R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
 FS:  0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
 Call Trace:
  text_poke_bp+0x27/0x64
  ? mutex_lock+0x36/0x5d
  arch_ftrace_update_trampoline+0x287/0x2d5
  ? ftrace_replace_code+0x14b/0x160
  ? ftrace_update_ftrace_func+0x65/0x6c
  __register_ftrace_function+0x6d/0x81
  ftrace_startup+0x23/0xc1
  register_ftrace_function+0x20/0x37
  func_set_flag+0x59/0x77
  __set_tracer_option.isra.19+0x20/0x3e
  trace_set_options+0xd6/0x13e
  apply_trace_boot_options+0x44/0x6d
  register_tracer+0x19e/0x1ac
  early_trace_init+0x21b/0x2c9
  start_kernel+0x241/0x518
  ? load_ucode_intel_bsp+0x21/0x52
  secondary_startup_64+0xa4/0xb0

I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".

The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.

Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.

Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae440 ("x86/ftrace: Use text_poke()")
Acked-by: default avatarPeter Zijlstra <peterz@infradead.org>
Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
parent 611d0a95
......@@ -56,6 +56,12 @@ struct dyn_arch_ftrace {
#ifndef __ASSEMBLY__
#if defined(CONFIG_FUNCTION_TRACER) && defined(CONFIG_DYNAMIC_FTRACE)
extern void set_ftrace_ops_ro(void);
#else
static inline void set_ftrace_ops_ro(void) { }
#endif
#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
static inline bool arch_syscall_match_sym_name(const char *sym, const char *name)
{
......
......@@ -407,7 +407,8 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
set_vm_flush_reset_perms(trampoline);
set_memory_ro((unsigned long)trampoline, npages);
if (likely(system_state != SYSTEM_BOOTING))
set_memory_ro((unsigned long)trampoline, npages);
set_memory_x((unsigned long)trampoline, npages);
return (unsigned long)trampoline;
fail:
......@@ -415,6 +416,32 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
return 0;
}
void set_ftrace_ops_ro(void)
{
struct ftrace_ops *ops;
unsigned long start_offset;
unsigned long end_offset;
unsigned long npages;
unsigned long size;
do_for_each_ftrace_op(ops, ftrace_ops_list) {
if (!(ops->flags & FTRACE_OPS_FL_ALLOC_TRAMP))
continue;
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
start_offset = (unsigned long)ftrace_regs_caller;
end_offset = (unsigned long)ftrace_regs_caller_end;
} else {
start_offset = (unsigned long)ftrace_caller;
end_offset = (unsigned long)ftrace_epilogue;
}
size = end_offset - start_offset;
size = size + RET_SIZE + sizeof(void *);
npages = DIV_ROUND_UP(size, PAGE_SIZE);
set_memory_ro((unsigned long)ops->trampoline, npages);
} while_for_each_ftrace_op(ops);
}
static unsigned long calc_trampoline_call_offset(bool save_regs)
{
unsigned long start_offset;
......
......@@ -54,6 +54,7 @@
#include <asm/init.h>
#include <asm/uv/uv.h>
#include <asm/setup.h>
#include <asm/ftrace.h>
#include "mm_internal.h"
......@@ -1291,6 +1292,8 @@ void mark_rodata_ro(void)
all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
set_memory_nx(text_end, (all_end - text_end) >> PAGE_SHIFT);
set_ftrace_ops_ro();
#ifdef CONFIG_CPA_DEBUG
printk(KERN_INFO "Testing CPA: undo %lx-%lx\n", start, end);
set_memory_rw(start, (end-start) >> PAGE_SHIFT);
......
......@@ -210,6 +210,29 @@ struct ftrace_ops {
#endif
};
extern struct ftrace_ops __rcu *ftrace_ops_list;
extern struct ftrace_ops ftrace_list_end;
/*
* Traverse the ftrace_global_list, invoking all entries. The reason that we
* can use rcu_dereference_raw_check() is that elements removed from this list
* are simply leaked, so there is no need to interact with a grace-period
* mechanism. The rcu_dereference_raw_check() calls are needed to handle
* concurrent insertions into the ftrace_global_list.
*
* Silly Alpha and silly pointer-speculation compiler optimizations!
*/
#define do_for_each_ftrace_op(op, list) \
op = rcu_dereference_raw_check(list); \
do
/*
* Optimized for just a single item in the list (as that is the normal case).
*/
#define while_for_each_ftrace_op(op) \
while (likely(op = rcu_dereference_raw_check((op)->next)) && \
unlikely((op) != &ftrace_list_end))
/*
* Type of the current tracing.
*/
......
......@@ -4,28 +4,6 @@
#ifdef CONFIG_FUNCTION_TRACER
/*
* Traverse the ftrace_global_list, invoking all entries. The reason that we
* can use rcu_dereference_raw_check() is that elements removed from this list
* are simply leaked, so there is no need to interact with a grace-period
* mechanism. The rcu_dereference_raw_check() calls are needed to handle
* concurrent insertions into the ftrace_global_list.
*
* Silly Alpha and silly pointer-speculation compiler optimizations!
*/
#define do_for_each_ftrace_op(op, list) \
op = rcu_dereference_raw_check(list); \
do
/*
* Optimized for just a single item in the list (as that is the normal case).
*/
#define while_for_each_ftrace_op(op) \
while (likely(op = rcu_dereference_raw_check((op)->next)) && \
unlikely((op) != &ftrace_list_end))
extern struct ftrace_ops __rcu *ftrace_ops_list;
extern struct ftrace_ops ftrace_list_end;
extern struct mutex ftrace_lock;
extern struct ftrace_ops global_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment