Merge tag 'amlogic-dt64' of...

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.6
- new boards: libretech-pc (S912 and S905D versions)
- new board: Videostrong KII Pro
- A1: add reset controller

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add audio fifo depths
  arm64: dts: meson: add libretech-pc boards support
  dt-bindings: arm: amlogic: add libretech-pc bindings
  arm64: dts: meson: gxl: add i2c C pins
  arm64: dts: meson-sm1: add video decoder compatible
  arm64: dts: meson-g12-common: add video decoder node
  arm64: dts: meson-gxbb: add support for Videostrong KII Pro
  dt-bindings: arm: amlogic: add Videostrong KII Pro bindings
  dt-bindings: Add vendor prefix for Videostrong
  arm64: dts: meson: a1: add pinctrl controller support
  arm64: dts: meson: add reset controller for Meson-A1 SoC

Link: https://lore.kernel.org/r/7hsgkidi3k.fsf@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/amlogic.yaml

@@ -59,6 +59,7 @@ properties:
               - friendlyarm,nanopi-k2
               - hardkernel,odroid-c2
               - nexbox,a95x
+              - videostrong,kii-pro
               - wetek,hub
               - wetek,play2
           - const: amlogic,meson-gxbb
@@ -104,6 +105,7 @@ properties:
           - enum:
               - amlogic,p230
               - amlogic,p231
+              - libretech,aml-s905d-pc
               - phicomm,n1
           - const: amlogic,s905d
           - const: amlogic,meson-gxl
@@ -115,6 +117,7 @@ properties:
               - amlogic,q201
               - khadas,vim2
               - kingnovel,r-box-pro
+              - libretech,aml-s912-pc
               - nexbox,a1
               - tronsmart,vega-s96
           - const: amlogic,s912

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -1012,6 +1012,8 @@ patternProperties:
     description: Variscite Ltd.
   "^via,.*":
     description: VIA Technologies, Inc.
+  "^videostrong,.*":
+    description: Videostrong Technology Co., Ltd.
   "^virtio,.*":
     description: Virtual I/O Device Specification, developed by the OASIS consortium
   "^vishay,.*":

arch/arm64/boot/dts/amlogic/Makefile

@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
@@ -29,11 +30,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-libretech-pc.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-vega-s96.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-khadas-vim3l.dtb

arch/arm64/boot/dts/amlogic/meson-a1.dtsi

@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -74,6 +75,30 @@ apb: bus@fe000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
 
+
+			reset: reset-controller@0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl@0400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank@0400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
 			uart_AO: serial@1c00 {
 				compatible = "amlogic,meson-gx-uart",
 					     "amlogic,meson-ao-uart";

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -1169,6 +1169,7 @@ toddr_a: audio-controller@100 {
 				interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
 				resets = <&arb AXG_ARB_TODDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1180,6 +1181,7 @@ toddr_b: audio-controller@140 {
 				interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
 				resets = <&arb AXG_ARB_TODDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1191,6 +1193,7 @@ toddr_c: audio-controller@180 {
 				interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
 				resets = <&arb AXG_ARB_TODDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1202,6 +1205,7 @@ frddr_a: audio-controller@1c0 {
 				interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
 				resets = <&arb AXG_ARB_FRDDR_A>;
+				amlogic,fifo-depth = <512>;
 				status = "disabled";
 			};
 
@@ -1213,6 +1217,7 @@ frddr_b: audio-controller@200 {
 				interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
 				resets = <&arb AXG_ARB_FRDDR_B>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 
@@ -1224,6 +1229,7 @@ frddr_c: audio-controller@240 {
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
 				resets = <&arb AXG_ARB_FRDDR_C>;
+				amlogic,fifo-depth = <256>;
 				status = "disabled";
 			};
 

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -1968,6 +1968,29 @@ saradc: adc@9000 {
 			};
 		};
 
+		vdec: video-decoder@ff620000 {
+			compatible = "amlogic,g12a-vdec";
+			reg = <0x0 0xff620000 0x0 0x10000>,
+			      <0x0 0xffd0e180 0x0 0xe4>;
+			reg-names = "dos", "esparser";
+			interrupts = <GIC_SPI 44 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "vdec", "esparser";
+
+			amlogic,ao-sysctrl = <&rti>;
+			amlogic,canvas = <&canvas>;
+
+			clocks = <&clkc CLKID_PARSER>,
+				 <&clkc CLKID_DOS>,
+				 <&clkc CLKID_VDEC_1>,
+				 <&clkc CLKID_VDEC_HEVC>,
+				 <&clkc CLKID_VDEC_HEVCF>;
+			clock-names = "dos_parser", "dos", "vdec_1",
+				      "vdec_hevc", "vdec_hevcf";
+			resets = <&reset RESET_PARSER>;
+			reset-names = "esparser";
+		};
+
 		vpu: vpu@ff900000 {
 			compatible = "amlogic,meson-g12a-vpu";
 			reg = <0x0 0xff900000 0x0 0x100000>,

arch/arm64/boot/dts/amlogic/meson-g12.dtsi

@@ -106,6 +106,7 @@ toddr_a: audio-controller@100 {
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -120,6 +121,7 @@ toddr_b: audio-controller@140 {
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -134,6 +136,7 @@ toddr_c: audio-controller@180 {
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -148,6 +151,7 @@ frddr_a: audio-controller@1c0 {
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -162,6 +166,7 @@ frddr_b: audio-controller@200 {
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -176,6 +181,7 @@ frddr_c: audio-controller@240 {
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/amlogic/meson-gx-libretech-pc.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/* Libretech Amlogic GX PC form factor - AKA: Tartiflette */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		update-button {
+			label = "update";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+		status = "disabled";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		power-button {
+			label = "power";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	ao_5v: regulator-ao_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "AO_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_in>;
+		regulator-always-on;
+	};
+
+	dc_in: regulator-dc_in {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_IN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			panic-indicator;
+		};
+	};
+
+	vcc_card: regulator-vcc_card {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_CARD";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vddio_ao3v3>;
+
+		gpio = <&gpio GPIODV_4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc5v: regulator-vcc5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&ao_5v>;
+
+		gpio = <&gpio GPIOH_3 GPIO_OPEN_DRAIN>;
+	};
+
+	vddio_ao18: regulator-vddio_ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_ao3v3: regulator-vddio_ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&ao_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vddio_ao3v3>;
+		regulator-always-on;
+	};
+
+	vddio_card: regulator-vddio-card {
+		compatible = "regulator-gpio";
+		regulator-name = "VDDIO_CARD";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+			 <1800000 1>;
+
+		regulator-settling-time-up-us = <200>;
+		regulator-settling-time-down-us = <50000>;
+	};
+};
+
+&cec_AO {
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+	status = "okay";
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	pinctrl-0 = <&eth_pins>, <&eth_phy_irq_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&external_phy>;
+	amlogic,tx-delay-ns = <2>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		reg = <0>;
+		max-speed = <1000>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <30000>;
+		reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the reset pin of the usb HUB is driven high to take
+	 * it out of reset.
+	 */
+	usb1_rst_pins: usb1_rst_irq {
+		mux {
+			groups = "GPIODV_3";
+			function = "gpio_periphs";
+			bias-disable;
+			output-high;
+		};
+	};
+
+	/* Make sure the phy irq pin is properly configured as input */
+	eth_phy_irq_pins: eth_phy_irq {
+		mux {
+			groups = "GPIOZ_15";
+			function = "gpio_periphs";
+			bias-disable;
+			output-disable;
+		};
+	};
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+	hdmi-supply = <&vcc5v>;
+	status = "okay";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&ir {
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_C {
+	pinctrl-0 = <&i2c_c_dv18_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtc: rtc@51 {
+		reg = <0x51>;
+		compatible = "nxp,pcf8563";
+		#clock-cells = <0>;
+		clock-output-names = "rtc_clkout";
+	};
+};
+
+&pwm_AO_ab {
+	pinctrl-0 = <&pwm_ao_a_3_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ab {
+	pinctrl-0 = <&pwm_b_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&pwm_ef {
+	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vddio_ao18>;
+	status = "okay";
+};
+
+/* SD card */
+&sd_emmc_b {
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-1 = <&sdcard_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
+
+	vmmc-supply = <&vcc_card>;
+	vqmmc-supply = <&vddio_card>;
+
+	status = "okay";
+};
+
+/* eMMC */
+&sd_emmc_c {
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	status = "okay";
+};
+
+&spifc {
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	gd25lq128: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <12000000>;
+	};
+};
+
+&uart_AO {
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb1_rst_pins>;
+	pinctrl-names = "default";
+	phy-supply = <&vcc5v>;
+};
+
+&usb2_phy1 {
+	phy-supply = <&vcc5v>;
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Mohammad Rasim <mohammad.rasim96@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+/ {
+	compatible = "videostrong,kii-pro", "amlogic,p201", "amlogic,s905", "amlogic,meson-gxbb";
+	model = "Videostrong KII Pro";
+
+	leds {
+		compatible = "gpio-leds";
+		status {
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+
+
+&uart_A {
+	status = "okay";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm4335a0";
+	};
+};
+
+
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rmii";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* IC Plus IP101GR (0x02430c54) */
+			reg = <0>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <10000>;
+			reset-gpios = <&gpio GPIOZ_14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-libretech-pc.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s905d-pc", "amlogic,s905d",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer AML-S905D-PC";
+};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -533,6 +533,15 @@ mux {
 			};
 		};
 
+		i2c_c_dv18_pins: i2c_c_dv18 {
+			mux {
+				groups = "i2c_sck_c_dv19",
+				      "i2c_sda_c_dv18";
+				function = "i2c_c";
+				bias-disable;
+			};
+		};
+
 		eth_pins: eth_c {
 			mux {
 				groups = "eth_mdio",

arch/arm64/boot/dts/amlogic/meson-gxm-s912-libretech-pc.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 BayLibre SAS. All rights reserved.
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+#include "meson-gx-libretech-pc.dtsi"
+
+/ {
+	compatible = "libretech,aml-s912-pc", "amlogic,s912",
+		     "amlogic,meson-gxm";
+	model = "Libre Computer AML-S912-PC";
+
+	typec2_vbus: regulator-typec2_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "TYPEC2_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v>;
+
+		gpio = <&gpio GPIODV_1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&pinctrl_periphs {
+	/*
+	 * Make sure the irq pin of the TYPE C controller is not driven
+	 * by the SoC.
+	 */
+	fusb302_irq_pins: fusb302_irq {
+		mux {
+			groups = "GPIODV_0";
+			function = "gpio_periphs";
+			bias-pull-up;
+			output-disable;
+		};
+	};
+};
+
+&i2c_C {
+	fusb302@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		pinctrl-0 = <&fusb302_irq_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
+
+		vbus-supply = <&typec2_vbus>;
+
+		status = "okay";
+	};
+};
+
+&usb2_phy2 {
+	phy-supply = <&typec2_vbus>;
+};

arch/arm64/boot/dts/amlogic/meson-sm1.dtsi

@@ -201,6 +201,7 @@ toddr_a: audio-controller@100 {
 			resets = <&arb AXG_ARB_TODDR_A>,
 				 <&clkc_audio AUD_RESET_TODDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <8192>;
 			status = "disabled";
 		};
 
@@ -215,6 +216,7 @@ toddr_b: audio-controller@140 {
 			resets = <&arb AXG_ARB_TODDR_B>,
 				 <&clkc_audio AUD_RESET_TODDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -229,6 +231,7 @@ toddr_c: audio-controller@180 {
 			resets = <&arb AXG_ARB_TODDR_C>,
 				 <&clkc_audio AUD_RESET_TODDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -243,6 +246,7 @@ frddr_a: audio-controller@1c0 {
 			resets = <&arb AXG_ARB_FRDDR_A>,
 				 <&clkc_audio AUD_RESET_FRDDR_A>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <512>;
 			status = "disabled";
 		};
 
@@ -257,6 +261,7 @@ frddr_b: audio-controller@200 {
 			resets = <&arb AXG_ARB_FRDDR_B>,
 				 <&clkc_audio AUD_RESET_FRDDR_B>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -271,6 +276,7 @@ frddr_c: audio-controller@240 {
 			resets = <&arb AXG_ARB_FRDDR_C>,
 				 <&clkc_audio AUD_RESET_FRDDR_C>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -412,6 +418,7 @@ toddr_d: audio-controller@840 {
 			resets = <&arb AXG_ARB_TODDR_D>,
 				 <&clkc_audio AUD_RESET_TODDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 
@@ -426,6 +433,7 @@ frddr_d: audio-controller@880 {
 			resets = <&arb AXG_ARB_FRDDR_D>,
 				 <&clkc_audio AUD_RESET_FRDDR_D>;
 			reset-names = "arb", "rst";
+			amlogic,fifo-depth = <256>;
 			status = "disabled";
 		};
 	};
@@ -482,6 +490,10 @@ &simplefb_hdmi {
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };
 
+&vdec {
+	compatible = "amlogic,sm1-vdec";
+};
+
 &vpu {
 	power-domains = <&pwrc PWRC_SM1_VPU_ID>;
 };