x86/microcode: Untangle from BLK_DEV_INITRD

commit 5f9c01aa upstream.

Thomas Voegtle reported that doing oldconfig with a .config which has
CONFIG_MICROCODE enabled but BLK_DEV_INITRD disabled prevents the
microcode loading mechanism from being built.

So untangle it from the BLK_DEV_INITRD dependency so that oldconfig
doesn't turn it off and add an explanatory text to its Kconfig help what
the supported methods for supplying microcode are.
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454499225-21544-2-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/x86/Kconfig

@@ -1126,22 +1126,23 @@ config MICROCODE
 	bool "CPU microcode loading support"
 	default y
 	depends on CPU_SUP_AMD || CPU_SUP_INTEL
-	depends on BLK_DEV_INITRD
 	select FW_LOADER
 	---help---
-
 	  If you say Y here, you will be able to update the microcode on
-	  certain Intel and AMD processors. The Intel support is for the
-	  IA32 family, e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4,
-	  Xeon etc. The AMD support is for families 0x10 and later. You will
-	  obviously need the actual microcode binary data itself which is not
-	  shipped with the Linux kernel.
-
-	  This option selects the general module only, you need to select
-	  at least one vendor specific module as well.
-
-	  To compile this driver as a module, choose M here: the module
-	  will be called microcode.
+	  Intel and AMD processors. The Intel support is for the IA32 family,
+	  e.g. Pentium Pro, Pentium II, Pentium III, Pentium 4, Xeon etc. The
+	  AMD support is for families 0x10 and later. You will obviously need
+	  the actual microcode binary data itself which is not shipped with
+	  the Linux kernel.
+
+	  The preferred method to load microcode from a detached initrd is described
+	  in Documentation/x86/early-microcode.txt. For that you need to enable
+	  CONFIG_BLK_DEV_INITRD in order for the loader to be able to scan the
+	  initrd for microcode blobs.
+
+	  In addition, you can build-in the microcode into the kernel. For that you
+	  need to enable FIRMWARE_IN_KERNEL and add the vendor-supplied microcode
+	  to the CONFIG_EXTRA_FIRMWARE config option.
 
 config MICROCODE_INTEL
 	bool "Intel microcode loading support"

arch/x86/include/asm/microcode.h

@@ -2,6 +2,7 @@
 #define _ASM_X86_MICROCODE_H
 
 #include <linux/earlycpio.h>
+#include <linux/initrd.h>
 
 #define native_rdmsr(msr, val1, val2)			\
 do {							\
@@ -168,4 +169,29 @@ static inline void reload_early_microcode(void)			{ }
 static inline bool
 get_builtin_firmware(struct cpio_data *cd, const char *name)	{ return false; }
 #endif
+
+static inline unsigned long get_initrd_start(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	return initrd_start;
+#else
+	return 0;
+#endif
+}
+
+static inline unsigned long get_initrd_start_addr(void)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+#ifdef CONFIG_X86_32
+	unsigned long *initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
+
+	return (unsigned long)__pa_nodebug(*initrd_start_p);
+#else
+	return get_initrd_start();
+#endif
+#else /* CONFIG_BLK_DEV_INITRD */
+	return 0;
+#endif
+}
+
 #endif /* _ASM_X86_MICROCODE_H */

arch/x86/kernel/cpu/microcode/intel.c

@@ -698,7 +698,7 @@ int __init save_microcode_in_initrd_intel(void)
 	if (count == 0)
 		return ret;
 
-	copy_initrd_ptrs(mc_saved, mc_saved_in_initrd, initrd_start, count);
+	copy_initrd_ptrs(mc_saved, mc_saved_in_initrd, get_initrd_start(), count);
 	ret = save_microcode(&mc_saved_data, mc_saved, count);
 	if (ret)
 		pr_err("Cannot save microcode patches from initrd.\n");
@@ -760,20 +760,14 @@ void load_ucode_intel_ap(void)
 	struct mc_saved_data *mc_saved_data_p;
 	struct ucode_cpu_info uci;
 	unsigned long *mc_saved_in_initrd_p;
-	unsigned long initrd_start_addr;
 	enum ucode_state ret;
 #ifdef CONFIG_X86_32
-	unsigned long *initrd_start_p;
 
-	mc_saved_in_initrd_p =
-		(unsigned long *)__pa_nodebug(mc_saved_in_initrd);
+	mc_saved_in_initrd_p = (unsigned long *)__pa_nodebug(mc_saved_in_initrd);
 	mc_saved_data_p = (struct mc_saved_data *)__pa_nodebug(&mc_saved_data);
-	initrd_start_p = (unsigned long *)__pa_nodebug(&initrd_start);
-	initrd_start_addr = (unsigned long)__pa_nodebug(*initrd_start_p);
 #else
-	mc_saved_data_p = &mc_saved_data;
 	mc_saved_in_initrd_p = mc_saved_in_initrd;
-	initrd_start_addr = initrd_start;
+	mc_saved_data_p = &mc_saved_data;
 #endif
 
 	/*
@@ -785,7 +779,7 @@ void load_ucode_intel_ap(void)
 
 	collect_cpu_info_early(&uci);
 	ret = load_microcode(mc_saved_data_p, mc_saved_in_initrd_p,
-			     initrd_start_addr, &uci);
+			     get_initrd_start_addr(), &uci);
 
 	if (ret != UCODE_OK)
 		return;