USB: add USB test and measurement class driver

This driver was originaly written by Stefan Kopp, but massively
reworked by Greg for submission.

Thanks to Felipe Balbi <me@felipebalbi.com> for lots of work in cleaning
up this driver.

Thanks to Oliver Neukum <oliver@neukum.org> for reviewing previous
versions and pointing out problems.


Cc: Stefan Kopp <stefan_kopp@agilent.com>
Cc: Marcel Janssen <korgull@home.nl>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation/ABI/stable/sysfs-driver-usb-usbtmc

+What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file is the TermChar value to be sent to the USB TMC
+		device as described by the document, "Universal Serial Bus Test
+		and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.
+
+		Note that the TermCharEnabled file determines if this value is
+		sent to the device or not.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the TermChar is to be sent to the
+		device on every transaction or not.  For more details about
+		this, please see the document, "Universal Serial Bus Test and
+		Measurement Class Specification (USBTMC) Revision 1.0" as
+		published by the USB-IF.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@suse.de>
+Description:
+		This file determines if the the transaction of the USB TMC
+		device is to be automatically aborted if there is any error.
+		For more details about this, please see the document,
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" as published by the USB-IF.

Documentation/devices.txt

@@ -2571,6 +2571,9 @@ Your cooperation is appreciated.
 		160 = /dev/usb/legousbtower0	1st USB Legotower device
 		    ...
 		175 = /dev/usb/legousbtower15	16th USB Legotower device
+		176 = /dev/usb/usbtmc1	First USB TMC device
+		   ...
+		192 = /dev/usb/usbtmc16	16th USB TMC device
 		240 = /dev/usb/dabusb0	First daubusb device
 		    ...
 		243 = /dev/usb/dabusb3	Fourth dabusb device

Documentation/ioctl-number.txt

@@ -110,6 +110,8 @@ Code	Seq#	Include File		Comments
 'W'	00-1F	linux/wanrouter.h	conflict!
 'X'	all	linux/xfs_fs.h
 'Y'	all	linux/cyclades.h
+'['	00-07	linux/usb/usbtmc.h	USB Test and Measurement Devices
+					<mailto:gregkh@suse.de>
 'a'	all				ATM on linux
 					<http://lrcwww.epfl.ch/linux-atm/magic.html>
 'b'	00-FF				bit3 vme host bridge

drivers/usb/class/Kconfig

@@ -40,3 +40,13 @@ config USB_WDM
 	  To compile this driver as a module, choose M here: the
 	  module will be called cdc-wdm.
 
+config USB_TMC
+	tristate "USB Test and Measurement Class support"
+	depends on USB
+	help
+	  Say Y here if you want to connect a USB device that follows
+	  the USB.org specification for USB Test and Measurement devices
+	  to your computer's USB port.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtmc.

drivers/usb/class/Makefile

@@ -6,3 +6,4 @@
 obj-$(CONFIG_USB_ACM)		+= cdc-acm.o
 obj-$(CONFIG_USB_PRINTER)	+= usblp.o
 obj-$(CONFIG_USB_WDM)		+= cdc-wdm.o
+obj-$(CONFIG_USB_TMC)		+= usbtmc.o

include/linux/usb/Kbuild

@@ -4,4 +4,4 @@ header-y += ch9.h
 header-y += gadgetfs.h
 header-y += midi.h
 header-y += g_printer.h
-
+header-y += tmc.h

include/linux/usb/tmc.h

+/*
+ * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany
+ * Copyright (C) 2008 Novell, Inc.
+ * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
+ *
+ * This file holds USB constants defined by the USB Device Class
+ * Definition for Test and Measurement devices published by the USB-IF.
+ *
+ * It also has the ioctl definitions for the usbtmc kernel driver that
+ * userspace needs to know about.
+ */
+
+#ifndef __LINUX_USB_TMC_H
+#define __LINUX_USB_TMC_H
+
+/* USB TMC status values */
+#define USBTMC_STATUS_SUCCESS				0x01
+#define USBTMC_STATUS_PENDING				0x02
+#define USBTMC_STATUS_FAILED				0x80
+#define USBTMC_STATUS_TRANSFER_NOT_IN_PROGRESS		0x81
+#define USBTMC_STATUS_SPLIT_NOT_IN_PROGRESS		0x82
+#define USBTMC_STATUS_SPLIT_IN_PROGRESS			0x83
+
+/* USB TMC requests values */
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT		1
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS	2
+#define USBTMC_REQUEST_INITIATE_ABORT_BULK_IN		3
+#define USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS	4
+#define USBTMC_REQUEST_INITIATE_CLEAR			5
+#define USBTMC_REQUEST_CHECK_CLEAR_STATUS		6
+#define USBTMC_REQUEST_GET_CAPABILITIES			7
+#define USBTMC_REQUEST_INDICATOR_PULSE			64
+
+/* Request values for USBTMC driver's ioctl entry point */
+#define USBTMC_IOC_NR			91
+#define USBTMC_IOCTL_INDICATOR_PULSE	_IO(USBTMC_IOC_NR, 1)
+#define USBTMC_IOCTL_CLEAR		_IO(USBTMC_IOC_NR, 2)
+#define USBTMC_IOCTL_ABORT_BULK_OUT	_IO(USBTMC_IOC_NR, 3)
+#define USBTMC_IOCTL_ABORT_BULK_IN	_IO(USBTMC_IOC_NR, 4)
+#define USBTMC_IOCTL_CLEAR_OUT_HALT	_IO(USBTMC_IOC_NR, 6)
+#define USBTMC_IOCTL_CLEAR_IN_HALT	_IO(USBTMC_IOC_NR, 7)
+
+#endif