Commit 5b8343e0 authored by Lorenzo Bianconi's avatar Lorenzo Bianconi Committed by Jonathan Cameron

iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page

Check if the sensor hub output register is located in the primary or in the
secondary memory page. This is a preliminary patch to support i2c master
controller on lsm6dsm devices
Signed-off-by: default avatarLorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 3a431957
......@@ -197,7 +197,10 @@ struct st_lsm6dsx_shub_settings {
struct st_lsm6dsx_reg aux_sens;
struct st_lsm6dsx_reg wr_once;
u8 num_ext_dev;
u8 shub_out;
struct {
bool sec_page;
u8 addr;
} shub_out;
u8 slv0_addr;
u8 dw_slv0_addr;
u8 batch_en;
......
......@@ -886,7 +886,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = BIT(6),
},
.num_ext_dev = 3,
.shub_out = 0x02,
.shub_out = {
.sec_page = true,
.addr = 0x02,
},
.slv0_addr = 0x15,
.dw_slv0_addr = 0x21,
.batch_en = BIT(3),
......@@ -1263,7 +1266,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.mask = BIT(6),
},
.num_ext_dev = 3,
.shub_out = 0x02,
.shub_out = {
.sec_page = true,
.addr = 0x02,
},
.slv0_addr = 0x15,
.dw_slv0_addr = 0x21,
.batch_en = BIT(3),
......
......@@ -105,20 +105,27 @@ static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw)
*
* Read st_lsm6dsx i2c controller register
*/
static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr,
u8 *data, int len)
static int
st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 *data,
int len)
{
const struct st_lsm6dsx_shub_settings *hub_settings;
int err;
mutex_lock(&hw->page_lock);
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
goto out;
hub_settings = &hw->settings->shub_settings;
if (hub_settings->shub_out.sec_page) {
err = st_lsm6dsx_set_page(hw, true);
if (err < 0)
goto out;
}
err = regmap_bulk_read(hw->regmap, addr, data, len);
err = regmap_bulk_read(hw->regmap, hub_settings->shub_out.addr,
data, len);
st_lsm6dsx_set_page(hw, false);
if (hub_settings->shub_out.sec_page)
st_lsm6dsx_set_page(hw, false);
out:
mutex_unlock(&hw->page_lock);
......@@ -236,8 +243,7 @@ st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr,
st_lsm6dsx_shub_wait_complete(hw);
err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data,
len & ST_LS6DSX_READ_OP_MASK);
err = st_lsm6dsx_shub_read_reg(hw, data, len & ST_LS6DSX_READ_OP_MASK);
st_lsm6dsx_shub_master_enable(sensor, false);
......@@ -719,9 +725,7 @@ st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr,
st_lsm6dsx_shub_wait_complete(hw);
err = st_lsm6dsx_shub_read_reg(hw,
hub_settings->shub_out,
&data, sizeof(data));
err = st_lsm6dsx_shub_read_reg(hw, &data, sizeof(data));
st_lsm6dsx_shub_master_enable(sensor, false);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment