ARM: STi: Supply I2C configuration to STiH415 SoC

This patch supplies I2C configuration to STiH415 SoC.
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>

arch/arm/boot/dts/stih415-pinctrl.dtsi

@@ -86,6 +86,24 @@ st,pins {
 					};
 				};
 			};
+
+			sbc_i2c0 {
+				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
+					st,pins {
+						sda = <&PIO4 6 ALT1 BIDIR>;
+						scl = <&PIO4 5 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			sbc_i2c1 {
+				pinctrl_sbc_i2c1_default: sbc_i2c1-default {
+					st,pins {
+						sda = <&PIO3 2 ALT2 BIDIR>;
+						scl = <&PIO3 1 ALT2 BIDIR>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front {
@@ -143,6 +161,24 @@ PIO12: gpio@fee07000 {
 				reg		= <0x7000 0x100>;
 				st,bank-name	= "PIO12";
 			};
+
+			i2c0 {
+				pinctrl_i2c0_default: i2c0-default {
+					st,pins {
+						sda = <&PIO9 3 ALT1 BIDIR>;
+						scl = <&PIO9 2 ALT1 BIDIR>;
+					};
+				};
+			};
+
+			i2c1 {
+				pinctrl_i2c1_default: i2c1-default {
+					st,pins {
+						sda = <&PIO12 1 ALT1 BIDIR>;
+						scl = <&PIO12 0 ALT1 BIDIR>;
+					};
+				};
+			};
 		};
 
 		pin-controller-rear {

arch/arm/boot/dts/stih415.dtsi

@@ -9,6 +9,7 @@
 #include "stih41x.dtsi"
 #include "stih415-clock.dtsi"
 #include "stih415-pinctrl.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 / {
 
 	L2: cache-controller {
@@ -83,5 +84,57 @@ sbc_serial1: serial@fe531000 {
 			pinctrl-names 	= "default";
 			pinctrl-0	= <&pinctrl_sbc_serial1>;
 		};
+
+		i2c@fed40000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed40000 0x110>;
+			interrupts	= <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&CLKS_ICN_REG_0>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fed41000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfed41000 0x110>;
+			interrupts	= <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&CLKS_ICN_REG_0>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_i2c1_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe540000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe540000 0x110>;
+			interrupts	= <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&CLK_SYSIN>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c0_default>;
+
+			status		= "disabled";
+		};
+
+		i2c@fe541000 {
+			compatible	= "st,comms-ssc4-i2c";
+			reg		= <0xfe541000 0x110>;
+			interrupts	= <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			clocks		= <&CLK_SYSIN>;
+			clock-names	= "ssc";
+			clock-frequency = <400000>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_sbc_i2c1_default>;
+
+			status		= "disabled";
+		};
 	};
 };