phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e

Each of the CPSW9G ports in J721e support additional modes like QSGMII.
Add a new compatible for J721e to support the additional modes.

In TI's J721e, each of the CPSW9G ethernet interfaces can act as a
QSGMII main or QSGMII-SUB port. The QSGMII main interface is responsible
for performing auto-negotiation between the MAC and the PHY while the rest
of the interfaces are designated as QSGMII-SUB interfaces, indicating that
they will not be taking part in the auto-negotiation process.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20221026074532.109220-4-s-vadapalli@ti.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

drivers/phy/ti/phy-gmii-sel.c

@@ -218,6 +218,15 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
 	.num_qsgmii_main_ports = 1,
 };
 
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
+	.use_of_data = true,
+	.regfields = phy_gmii_sel_fields_am654,
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+	.num_ports = 8,
+	.num_qsgmii_main_ports = 2,
+};
+
 static const struct of_device_id phy_gmii_sel_id_table[] = {
 	{
 		.compatible	= "ti,am3352-phy-gmii-sel",
@@ -243,6 +252,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
 		.compatible	= "ti,j7200-cpsw5g-phy-gmii-sel",
 		.data		= &phy_gmii_sel_cpsw5g_soc_j7200,
 	},
+	{
+		.compatible	= "ti,j721e-cpsw9g-phy-gmii-sel",
+		.data		= &phy_gmii_sel_cpsw9g_soc_j721e,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);