Skip to content

L
linux
Commit 5bf01b57 authored by Danielle Ratson's avatar Danielle Ratson Committed by David S. Miller
Browse files
Options

mlxsw: spectrum_ethtool: Remove internal speeds from PTYS register 

The PTYS register is used to report and configure the port type and
speed. Currently, internal bits in the register are used the same way
other bits are used.

Using the internal bits can cause bad parameter firmware errors. For
example, trying to write to internal bit 25 returns:

EMAD reg access failed (tid=53e2bffa00004310,reg_id=5004(ptys),type=write,status=7(bad parameter))

Remove the internal bits from the PTYS register, so that it is no longer
possible to pass them to firmware.
Signed-off-by: default avatarDanielle Ratson <danieller@mellanox.com>
Reviewed-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ffff9c9c
Hide whitespace changes
Inline Side-by-side
Showing with 1 addition and 68 deletions
drivers/net/ethernet/mellanox/mlxsw/reg.h
View file @ 5bf01b57
......@@ -4174,7 +4174,6 @@ MLXSW_ITEM32(reg, ptys, an_status, 0x04, 28, 4);
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_SGMII_100M BIT(0)
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_1000BASE_X_SGMII BIT(1)
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_2_5GBASE_X_2_5GMII BIT(2)
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_5GBASE_R BIT(3)
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_XFI_XAUI_1_10G BIT(4)
#define MLXSW_REG_PTYS_EXT_ETH_SPEED_XLAUI_4_XLPPI_4_40G BIT(5)
......@@ -4197,7 +4196,6 @@ MLXSW_ITEM32(reg, ptys, ext_eth_proto_cap, 0x08, 0, 32);
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 BIT(2)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4 BIT(3)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KR BIT(4)
#define MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2 BIT(5)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4 BIT(6)
#define MLXSW_REG_PTYS_ETH_SPEED_40GBASE_KR4 BIT(7)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CR BIT(12)
......@@ -4210,10 +4208,6 @@ MLXSW_ITEM32(reg, ptys, ext_eth_proto_cap, 0x08, 0, 32);
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 BIT(20)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 BIT(21)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 BIT(22)
#define MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4 BIT(23)
#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX BIT(24)
#define MLXSW_REG_PTYS_ETH_SPEED_100BASE_T BIT(25)
#define MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T BIT(26)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_CR BIT(27)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_KR BIT(28)
#define MLXSW_REG_PTYS_ETH_SPEED_25GBASE_SR BIT(29)
......
drivers/net/ethernet/mellanox/mlxsw/spectrum_ethtool.c
View file @ 5bf01b57
......@@ -992,22 +992,12 @@ struct mlxsw_sp1_port_link_mode {
};
static const struct mlxsw_sp1_port_link_mode mlxsw_sp1_port_link_mode[] = {
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100BASE_T,
.mask_ethtool = ETHTOOL_LINK_MODE_100baseT_Full_BIT,
.speed = SPEED_100,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_SGMII |
MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX,
.mask_ethtool = ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
.speed = SPEED_1000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T,
.mask_ethtool = ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
.speed = SPEED_10000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 |
MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4,
......@@ -1022,11 +1012,6 @@ static const struct mlxsw_sp1_port_link_mode mlxsw_sp1_port_link_mode[] = {
.mask_ethtool = ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
.speed = SPEED_10000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2,
.mask_ethtool = ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT,
.speed = SPEED_20000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4,
.mask_ethtool = ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT,
......@@ -1092,11 +1077,6 @@ static const struct mlxsw_sp1_port_link_mode mlxsw_sp1_port_link_mode[] = {
.mask_ethtool = ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT,
.speed = SPEED_100000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
.mask_ethtool = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
.speed = SPEED_100000,
},
};
#define MLXSW_SP1_PORT_LINK_MODE_LEN ARRAY_SIZE(mlxsw_sp1_port_link_mode)
......@@ -1236,14 +1216,6 @@ mlxsw_sp2_mask_ethtool_1000base_x_sgmii[] = {
#define MLXSW_SP2_MASK_ETHTOOL_1000BASE_X_SGMII_LEN \
ARRAY_SIZE(mlxsw_sp2_mask_ethtool_1000base_x_sgmii)
static const enum ethtool_link_mode_bit_indices
mlxsw_sp2_mask_ethtool_2_5gbase_x_2_5gmii[] = {
ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
};
#define MLXSW_SP2_MASK_ETHTOOL_2_5GBASE_X_2_5GMII_LEN \
ARRAY_SIZE(mlxsw_sp2_mask_ethtool_2_5gbase_x_2_5gmii)
static const enum ethtool_link_mode_bit_indices
mlxsw_sp2_mask_ethtool_5gbase_r[] = {
ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
......@@ -1407,16 +1379,6 @@ static const struct mlxsw_sp2_port_link_mode mlxsw_sp2_port_link_mode[] = {
MLXSW_SP_PORT_MASK_WIDTH_8X,
.speed = SPEED_1000,
},
{
.mask = MLXSW_REG_PTYS_EXT_ETH_SPEED_2_5GBASE_X_2_5GMII,
.mask_ethtool = mlxsw_sp2_mask_ethtool_2_5gbase_x_2_5gmii,
.m_ethtool_len = MLXSW_SP2_MASK_ETHTOOL_2_5GBASE_X_2_5GMII_LEN,
.mask_width = MLXSW_SP_PORT_MASK_WIDTH_1X |
MLXSW_SP_PORT_MASK_WIDTH_2X |
MLXSW_SP_PORT_MASK_WIDTH_4X |
MLXSW_SP_PORT_MASK_WIDTH_8X,
.speed = SPEED_2500,
},
{
.mask = MLXSW_REG_PTYS_EXT_ETH_SPEED_5GBASE_R,
.mask_ethtool = mlxsw_sp2_mask_ethtool_5gbase_r,
......
drivers/net/ethernet/mellanox/mlxsw/switchx2.c
View file @ 5bf01b57
......@@ -550,16 +550,6 @@ struct mlxsw_sx_port_link_mode {
};
static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100BASE_T,
.supported = SUPPORTED_100baseT_Full,
.advertised = ADVERTISED_100baseT_Full,
.speed = 100,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100BASE_TX,
.speed = 100,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_SGMII |
MLXSW_REG_PTYS_ETH_SPEED_1000BASE_KX,
......@@ -567,12 +557,6 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
.advertised = ADVERTISED_1000baseKX_Full,
.speed = 1000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_10GBASE_T,
.supported = SUPPORTED_10000baseT_Full,
.advertised = ADVERTISED_10000baseT_Full,
.speed = 10000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_10GBASE_CX4 |
MLXSW_REG_PTYS_ETH_SPEED_10GBASE_KX4,
......@@ -589,12 +573,6 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
.advertised = ADVERTISED_10000baseKR_Full,
.speed = 10000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_20GBASE_KR2,
.supported = SUPPORTED_20000baseKR2_Full,
.advertised = ADVERTISED_20000baseKR2_Full,
.speed = 20000,
},
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_40GBASE_CR4,
.supported = SUPPORTED_40000baseCR4_Full,
......@@ -634,8 +612,7 @@ static const struct mlxsw_sx_port_link_mode mlxsw_sx_port_link_mode[] = {
{
.mask = MLXSW_REG_PTYS_ETH_SPEED_100GBASE_CR4 |
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_SR4 |
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4 |
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_LR4_ER4,
MLXSW_REG_PTYS_ETH_SPEED_100GBASE_KR4,
.speed = 100000,
},
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7