Commit 5c2af91b authored by Florian Schilhabel's avatar Florian Schilhabel Committed by Greg Kroah-Hartman

Staging: rtl819su: added r8192SU_led.c/.h

added the necessary infrastructure for the leds on the device
this is a port from Realteks driver.

leds are now working partially.
Signed-off-by: default avatarFlorian Schilhabel <florian.c.schilhabel@googlemail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 7d8e737d
......@@ -20,6 +20,7 @@ r8192s_usb-objs := \
r8192S_Efuse.o \
r8192U_core.o \
r8192U_pm.o \
r8192SU_led.o \
ieee80211/ieee80211_crypt.o \
ieee80211/ieee80211_crypt_tkip.o \
ieee80211/ieee80211_crypt_ccmp.o \
......
......@@ -172,18 +172,20 @@ enum {
IG_Max
};
typedef enum _LED_CTL_MODE {
LED_CTL_POWER_ON = 1,
LED_CTL_LINK = 2,
LED_CTL_NO_LINK = 3,
LED_CTL_TX = 4,
LED_CTL_RX = 5,
LED_CTL_SITE_SURVEY = 6,
LED_CTL_POWER_OFF = 7,
LED_CTL_START_TO_LINK = 8,
LED_CTL_START_WPS = 9,
LED_CTL_STOP_WPS = 10,
typedef enum _LED_CTL_MODE{
LED_CTL_POWER_ON = 1,
LED_CTL_LINK = 2,
LED_CTL_NO_LINK = 3,
LED_CTL_TX = 4,
LED_CTL_RX = 5,
LED_CTL_SITE_SURVEY = 6,
LED_CTL_POWER_OFF = 7,
LED_CTL_START_TO_LINK = 8,
LED_CTL_START_WPS = 9,
LED_CTL_STOP_WPS = 10,
LED_CTL_START_WPS_BOTTON = 11,
LED_CTL_STOP_WPS_FAIL = 12,
LED_CTL_STOP_WPS_FAIL_OVERLAP = 13,
} LED_CTL_MODE;
typedef union _frameqos {
......
This diff is collapsed.
/******************************************************************************
* Copyright(c) 2008 - 2010 Realtek Corporation. All rights reserved.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
******************************************************************************/
#ifndef __INC_HAL8192USBLED_H
#define __INC_HAL8192USBLED_H
#include <linux/types.h>
#include <linux/timer.h>
typedef enum _LED_STATE_819xUsb{
LED_UNKNOWN = 0,
LED_ON = 1,
LED_OFF = 2,
LED_BLINK_NORMAL = 3,
LED_BLINK_SLOWLY = 4,
LED_POWER_ON_BLINK = 5,
LED_SCAN_BLINK = 6,
LED_NO_LINK_BLINK = 7,
LED_BLINK_StartToBlink = 8,
LED_BLINK_WPS = 9,
LED_TXRX_BLINK = 10,
LED_BLINK_WPS_STOP = 11,
LED_BLINK_WPS_STOP_OVERLAP = 12,
}LED_STATE_819xUsb;
#define IS_LED_WPS_BLINKING(_LED_819xUsb) (((PLED_819xUsb)_LED_819xUsb)->CurrLedState==LED_BLINK_WPS \
|| ((PLED_819xUsb)_LED_819xUsb)->CurrLedState==LED_BLINK_WPS_STOP \
|| ((PLED_819xUsb)_LED_819xUsb)->bLedWPSBlinkInProgress)
#define IS_LED_BLINKING(_LED_819xUsb) (((PLED_819xUsb)_LED_819xUsb)->bLedWPSBlinkInProgress \
||((PLED_819xUsb)_LED_819xUsb)->bLedScanBlinkInProgress)
typedef enum _LED_PIN_819xUsb{
LED_PIN_GPIO0,
LED_PIN_LED0,
LED_PIN_LED1
}LED_PIN_819xUsb;
typedef enum _LED_STRATEGY_819xUsb{
SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
SW_LED_MODE1, /* SW control for PCI Express */
SW_LED_MODE2, /* SW control for Cameo. */
SW_LED_MODE3, /* SW contorl for RunTop. */
SW_LED_MODE4, /* SW control for Netcore */
SW_LED_MODE5,
HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes) */
}LED_STRATEGY_819xUsb, *PLED_STRATEGY_819xUsb;
typedef struct _LED_819xUsb{
struct net_device *dev;
LED_PIN_819xUsb LedPin;
LED_STATE_819xUsb CurrLedState;
bool bLedOn;
bool bSWLedCtrl;
bool bLedBlinkInProgress;
bool bLedNoLinkBlinkInProgress;
bool bLedLinkBlinkInProgress;
bool bLedStartToLinkBlinkInProgress;
bool bLedScanBlinkInProgress;
bool bLedWPSBlinkInProgress;
u32 BlinkTimes;
LED_STATE_819xUsb BlinkingLedState;
struct timer_list BlinkTimer;
} LED_819xUsb, *PLED_819xUsb;
void InitSwLeds(struct net_device *dev);
void DeInitSwLeds(struct net_device *dev);
void LedControl8192SUsb(struct net_device *dev,LED_CTL_MODE LedAction);
#endif
......@@ -43,6 +43,7 @@
#include "ieee80211/ieee80211.h"
#include "r8192S_firmware.h"
#include "r8192SU_led.h"
/* EEPROM defs for use with linux/eeprom_93cx6.h */
#define RTL819X_EEPROM_CMD_READ (1 << 0)
......@@ -1067,19 +1068,6 @@ typedef enum _RT_CUSTOMER_ID
RT_CID_PRONET = 13,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
//================================================================================
// LED customization.
//================================================================================
typedef enum _LED_STRATEGY_8190{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
SW_LED_MODE1, // SW control for PCI Express
SW_LED_MODE2, // SW control for Cameo.
SW_LED_MODE3, // SW contorl for RunTop.
SW_LED_MODE4, // SW control for Netcore
HW_LED, // HW control 2 LEDs, LED0 and LED1 (there are 4 different control modes)
}LED_STRATEGY_8190, *PLED_STRATEGY_8190;
typedef enum _RESET_TYPE {
RESET_TYPE_NORESET = 0x00,
RESET_TYPE_NORMAL = 0x01,
......@@ -1131,7 +1119,7 @@ typedef struct r8192_priv
u8 eeprom_SubCustomerID;
u8 eeprom_ChannelPlan;
RT_CUSTOMER_ID CustomerID;
LED_STRATEGY_8190 LedStrategy;
LED_STRATEGY_819xUsb LedStrategy;
u8 txqueue_to_outpipemap[9];
u8 RtOutPipes[16];
u8 RtInPipes[16];
......@@ -1501,8 +1489,17 @@ typedef struct r8192_priv
u8 MinSpaceCfg;
u16 rf_pathmap;
//#endif
/* added for led control */
PLED_819xUsb pLed;
LED_819xUsb SwLed0;
LED_819xUsb SwLed1;
u8 bRegUseLed;
struct work_struct BlinkWorkItem;
/* added for led control */
u16 FwCmdIOMap;
u32 FwCmdIOParam;
u8 DMFlag;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment