rt2x00: Push beacon TX descriptor writing to drivers.

Not all the devices require a TX descriptor to be written (i.e. rt2800
device don't require them). Push down the creation of the TX descriptor
to the device drivers so that they can decide for themselves whether
a TX descriptor is to be created.
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -1076,9 +1076,6 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	u32 word;
 	u32 reg;
 
 	/*
@@ -1091,9 +1088,15 @@ static void rt2400pci_write_beacon(struct queue_entry *entry,
 
 	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
 
-	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
-	rt2x00_desc_write(entry_priv->desc, 1, word);
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2400pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Enable beaconing again.

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1233,9 +1233,6 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
-	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
-	u32 word;
 	u32 reg;
 
 	/*
@@ -1248,9 +1245,15 @@ static void rt2500pci_write_beacon(struct queue_entry *entry,
 
 	rt2x00queue_map_txskb(rt2x00dev, entry->skb);
 
-	rt2x00_desc_read(entry_priv->desc, 1, &word);
-	rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
-	rt2x00_desc_write(entry_priv->desc, 1, word);
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2500pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
 
 	/*
 	 * Enable beaconing again.

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -1107,6 +1107,16 @@ static void rt2500usb_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field16(&reg, TXRX_CSR19_BEACON_GEN, 0);
 	rt2500usb_register_write(rt2x00dev, TXRX_CSR19, reg);
 
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt2500usb_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
 	/*
 	 * Take the descriptor in front of the skb into account.
 	 */

drivers/net/wireless/rt2x00/rt2800pci.c

@@ -688,6 +688,7 @@ static void rt2800pci_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
 
@@ -699,10 +700,25 @@ static void rt2800pci_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
+	/*
+	 * Register descriptor details in skb frame descriptor.
+	 */
+	skbdesc->desc = entry->skb->data - TXWI_DESC_SIZE;
+	skbdesc->desc_len = TXWI_DESC_SIZE;
+
 	/*
 	 * Add the TXWI for the beacon to the skb.
 	 */
 	rt2800_write_txwi(entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
+	/*
+	 * Adjust skb to take TXWI into account.
+	 */
 	skb_push(entry->skb, TXWI_DESC_SIZE);
 
 	/*

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -437,6 +437,7 @@ static void rt2800usb_write_beacon(struct queue_entry *entry,
 				   struct txentry_desc *txdesc)
 {
 	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
 	unsigned int beacon_base;
 	u32 reg;
 
@@ -448,10 +449,25 @@ static void rt2800usb_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
 	rt2800_register_write(rt2x00dev, BCN_TIME_CFG, reg);
 
+	/*
+	 * Register descriptor details in skb frame descriptor.
+	 */
+	skbdesc->desc = entry->skb->data - TXWI_DESC_SIZE;
+	skbdesc->desc_len = TXWI_DESC_SIZE;
+
 	/*
 	 * Add the TXWI for the beacon to the skb.
 	 */
 	rt2800_write_txwi(entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
+	/*
+	 * Adjust skb to take TXWI into account.
+	 */
 	skb_push(entry->skb, TXWI_DESC_SIZE);
 
 	/*

drivers/net/wireless/rt2x00/rt2x00queue.c

@@ -421,7 +421,6 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 {
 	struct data_queue *queue = entry->queue;
 	struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
-	enum rt2x00_dump_type dump_type;
 
 	rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, entry->skb, txdesc);
 
@@ -429,9 +428,7 @@ static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
 	 * All processing on the frame has been completed, this means
 	 * it is now ready to be dumped to userspace through debugfs.
 	 */
-	dump_type = (txdesc->queue == QID_BEACON) ?
-					DUMP_FRAME_BEACON : DUMP_FRAME_TX;
-	rt2x00debug_dump_frame(rt2x00dev, dump_type, entry->skb);
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TX, entry->skb);
 }
 
 static void rt2x00queue_kick_tx_queue(struct queue_entry *entry,
@@ -594,11 +591,6 @@ int rt2x00queue_update_beacon(struct rt2x00_dev *rt2x00dev,
 	memset(skbdesc, 0, sizeof(*skbdesc));
 	skbdesc->entry = intf->beacon;
 
-	/*
-	 * Write TX descriptor into reserved room in front of the beacon.
-	 */
-	rt2x00queue_write_tx_descriptor(intf->beacon, &txdesc);
-
 	/*
 	 * Send beacon to hardware and enable beacon genaration..
 	 */

drivers/net/wireless/rt2x00/rt61pci.c

@@ -1873,6 +1873,16 @@ static void rt61pci_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 	rt2x00pci_register_write(rt2x00dev, TXRX_CSR9, reg);
 
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt61pci_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
 	/*
 	 * Write entire beacon with descriptor to register.
 	 */

drivers/net/wireless/rt2x00/rt73usb.c

@@ -1527,6 +1527,16 @@ static void rt73usb_write_beacon(struct queue_entry *entry,
 	rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
 	rt2x00usb_register_write(rt2x00dev, TXRX_CSR9, reg);
 
+	/*
+	 * Write the TX descriptor for the beacon.
+	 */
+	rt73usb_write_tx_desc(rt2x00dev, entry->skb, txdesc);
+
+	/*
+	 * Dump beacon to userspace through debugfs.
+	 */
+	rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
+
 	/*
 	 * Take the descriptor in front of the skb into account.
 	 */