Commit 5c73d9ac authored by Andrew Lunn's avatar Andrew Lunn Committed by Shawn Guo

ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX

The SFF soldered onto the board expect the ports to use 1000BaseX.  It
makes no sense to have the ports set to SGMII, since they don't even
support that mode.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarChris Healy <cphealy@gmail.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent bcf9d467
...@@ -186,7 +186,7 @@ ports { ...@@ -186,7 +186,7 @@ ports {
port@2 { port@2 {
reg = <2>; reg = <2>;
label = "eth_fc_1000_2"; label = "eth_fc_1000_2";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff1>; sfp = <&sff1>;
}; };
...@@ -194,7 +194,7 @@ port@2 { ...@@ -194,7 +194,7 @@ port@2 {
port@3 { port@3 {
reg = <3>; reg = <3>;
label = "eth_fc_1000_3"; label = "eth_fc_1000_3";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff2>; sfp = <&sff2>;
}; };
...@@ -202,7 +202,7 @@ port@3 { ...@@ -202,7 +202,7 @@ port@3 {
port@4 { port@4 {
reg = <4>; reg = <4>;
label = "eth_fc_1000_4"; label = "eth_fc_1000_4";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff3>; sfp = <&sff3>;
}; };
...@@ -210,7 +210,7 @@ port@4 { ...@@ -210,7 +210,7 @@ port@4 {
port@5 { port@5 {
reg = <5>; reg = <5>;
label = "eth_fc_1000_5"; label = "eth_fc_1000_5";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff4>; sfp = <&sff4>;
}; };
...@@ -218,7 +218,7 @@ port@5 { ...@@ -218,7 +218,7 @@ port@5 {
port@6 { port@6 {
reg = <6>; reg = <6>;
label = "eth_fc_1000_6"; label = "eth_fc_1000_6";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff5>; sfp = <&sff5>;
}; };
...@@ -226,7 +226,7 @@ port@6 { ...@@ -226,7 +226,7 @@ port@6 {
port@7 { port@7 {
reg = <7>; reg = <7>;
label = "eth_fc_1000_7"; label = "eth_fc_1000_7";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff6>; sfp = <&sff6>;
}; };
...@@ -234,7 +234,7 @@ port@7 { ...@@ -234,7 +234,7 @@ port@7 {
port@9 { port@9 {
reg = <9>; reg = <9>;
label = "eth_fc_1000_1"; label = "eth_fc_1000_1";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff0>; sfp = <&sff0>;
}; };
...@@ -269,7 +269,7 @@ ports { ...@@ -269,7 +269,7 @@ ports {
port@2 { port@2 {
reg = <2>; reg = <2>;
label = "eth_fc_1000_8"; label = "eth_fc_1000_8";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff7>; sfp = <&sff7>;
}; };
...@@ -277,7 +277,7 @@ port@2 { ...@@ -277,7 +277,7 @@ port@2 {
port@3 { port@3 {
reg = <3>; reg = <3>;
label = "eth_fc_1000_9"; label = "eth_fc_1000_9";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff8>; sfp = <&sff8>;
}; };
...@@ -285,7 +285,7 @@ port@3 { ...@@ -285,7 +285,7 @@ port@3 {
port@4 { port@4 {
reg = <4>; reg = <4>;
label = "eth_fc_1000_10"; label = "eth_fc_1000_10";
phy-mode = "sgmii"; phy-mode = "1000base-x";
managed = "in-band-status"; managed = "in-band-status";
sfp = <&sff9>; sfp = <&sff9>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment