Merge tag 'iio-for-v4.2a' of...

Merge tag 'iio-for-v4.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First round of new drivers, functionality and cleanups for the 4.2 cycle

New drivers / device support
* st sensors driver, lsm303dlh magnetometer support.
* ltr501 - support ltr301 and ltr559 chips.

New functionality
* IIO_CHAN_INFO_CALIBEMISSIVITY for thermopile sensors.
* kxcjk1013 - make driver operational with external trigger.
* Add iio targets to the tools Makefile.

Cleanups
* st sensors - more helpful error message if device id wrong or irq request
  fails, explicitly make the Block Data Update optional rather
  than relying on writes to address 0 not doing anything, make interrupt
  support optional (Not always wired, and not all devices actually have
  an interrupt line.)
* kxcjk-1013 white space additions for readability, add the KXCJ9000 ACPI
  id as seen in the wild.
* sx9500 - GPIO reset support, refactor the GPIO interrupt code, add power
  management, optimize power usage by powering down when possible, rename
  the gpio interrupt pin to be more useful, trivial return path simplification,
  trivial formatting fixes.
* isl29018 -  move towards ABI compliance with a view to moving this driver
  out of staging, add some brackets to ensure code works as expected.  Note
  there is no actual bug as the condition being tested is always true
  (with current devices).
* ltr501 - add regmap support to get caching etc for later patches,
  fix a parameter sanity check that always fails (bug introduced
  earlier in this series), ACPI enumeration support,
  interrupt rate control support, interrupt support in general and
  integration time control support, code alignment cleanups.
* mma9553 - a number of little cleanups following a review from Hartmut
  after I'd already applied the original driver patch.
* tmp006 - prefix some defines with TMP006 for consistency.
* tsl4531 - cleanup some wrong prefixes, presumably from copy and paste.
* mlx90614 - check for errors in read values, add power management,
  add emissivity setting, add device tree binding documentation,
  fix a duplicate const warning.
* ti_am335x_adc - refactor the DT parsing into a separate function.

Documentation/ABI/testing/sysfs-bus-iio

@@ -1364,3 +1364,14 @@ Description:
 		hwfifo_watermak_min but not equal to any of the values in this
 		list, the driver will chose an appropriate value for the
 		hardware fifo watermark level.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity
+KernelVersion:	4.1
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The emissivity ratio of the surface in the field of view of the
+		contactless temperature sensor.  Emissivity varies from 0 to 1,
+		with 1 being the emissivity of a black body.

Documentation/devicetree/bindings/iio/st-sensors.txt

@@ -45,6 +45,7 @@ Gyroscopes:
 - st,lsm330-gyro
 
 Magnetometers:
+- st,lsm303dlh-magn
 - st,lsm303dlhc-magn
 - st,lsm303dlm-magn
 - st,lis3mdl-magn

Documentation/devicetree/bindings/iio/temperature/mlx90614.txt

+* Melexis MLX90614 contactless IR temperature sensor
+
+http://melexis.com/Infrared-Thermometer-Sensors/Infrared-Thermometer-Sensors/MLX90614-615.aspx
+
+Required properties:
+
+  - compatible: should be "melexis,mlx90614"
+  - reg: the I2C address of the sensor
+
+Optional properties:
+
+  - wakeup-gpios: device tree identifier of the GPIO connected to the SDA line
+      to hold low in order to wake up the device.  In normal operation, the
+      GPIO is set as input and will not interfere in I2C communication.  There
+      is no need for a GPIO driving the SCL line.  If no GPIO is given, power
+      management is disabled.
+
+Example:
+
+mlx90614@5a {
+	compatible = "melexis,mlx90614";
+	reg = <0x5a>;
+	wakeup-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -117,6 +117,7 @@ lltc	Linear Technology Corporation
 marvell	Marvell Technology Group Ltd.
 maxim	Maxim Integrated Products
 mediatek	MediaTek Inc.
+melexis	Melexis N.V.
 merrii	Merrii Technology Co., Ltd.
 micrel	Micrel Inc.
 microchip	Microchip Technology Inc.

drivers/iio/accel/kxcjk-1013.c

@@ -875,15 +875,18 @@ static int kxcjk1013_write_event_config(struct iio_dev *indio_dev,
 	return 0;
 }
 
-static int kxcjk1013_validate_trigger(struct iio_dev *indio_dev,
-				      struct iio_trigger *trig)
+static int kxcjk1013_buffer_preenable(struct iio_dev *indio_dev)
 {
 	struct kxcjk1013_data *data = iio_priv(indio_dev);
 
-	if (data->dready_trig != trig && data->motion_trig != trig)
-		return -EINVAL;
+	return kxcjk1013_set_power_state(data, true);
+}
 
-	return 0;
+static int kxcjk1013_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct kxcjk1013_data *data = iio_priv(indio_dev);
+
+	return kxcjk1013_set_power_state(data, false);
 }
 
 static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
@@ -935,6 +938,13 @@ static const struct iio_chan_spec kxcjk1013_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_buffer_setup_ops kxcjk1013_buffer_setup_ops = {
+	.preenable		= kxcjk1013_buffer_preenable,
+	.postenable		= iio_triggered_buffer_postenable,
+	.postdisable		= kxcjk1013_buffer_postdisable,
+	.predisable		= iio_triggered_buffer_predisable,
+};
+
 static const struct iio_info kxcjk1013_info = {
 	.attrs			= &kxcjk1013_attrs_group,
 	.read_raw		= kxcjk1013_read_raw,
@@ -943,7 +953,6 @@ static const struct iio_info kxcjk1013_info = {
 	.write_event_value	= kxcjk1013_write_event,
 	.write_event_config	= kxcjk1013_write_event_config,
 	.read_event_config	= kxcjk1013_read_event_config,
-	.validate_trigger	= kxcjk1013_validate_trigger,
 	.driver_module		= THIS_MODULE,
 };
 
@@ -1147,8 +1156,10 @@ static const char *kxcjk1013_match_acpi_device(struct device *dev,
 	id = acpi_match_device(dev->driver->acpi_match_table, dev);
 	if (!id)
 		return NULL;
+
 	if (strcmp(id->id, "SMO8500") == 0)
 		*is_smo8500_device = true;
+
 	*chipset = (enum kx_chipset)id->driver_data;
 
 	return dev_name(dev);
@@ -1163,6 +1174,7 @@ static int kxcjk1013_gpio_probe(struct i2c_client *client,
 
 	if (!client)
 		return -EINVAL;
+
 	if (data->is_smo8500_device)
 		return -ENOTSUPP;
 
@@ -1276,16 +1288,15 @@ static int kxcjk1013_probe(struct i2c_client *client,
 			data->motion_trig = NULL;
 			goto err_trigger_unregister;
 		}
+	}
 
-		ret = iio_triggered_buffer_setup(indio_dev,
-						&iio_pollfunc_store_time,
-						kxcjk1013_trigger_handler,
-						NULL);
-		if (ret < 0) {
-			dev_err(&client->dev,
-					"iio triggered buffer setup failed\n");
-			goto err_trigger_unregister;
-		}
+	ret = iio_triggered_buffer_setup(indio_dev,
+					 &iio_pollfunc_store_time,
+					 kxcjk1013_trigger_handler,
+					 &kxcjk1013_buffer_setup_ops);
+	if (ret < 0) {
+		dev_err(&client->dev, "iio triggered buffer setup failed\n");
+		goto err_trigger_unregister;
 	}
 
 	ret = iio_device_register(indio_dev);
@@ -1418,6 +1429,7 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = {
 static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
+	{"KXCJ9000", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
 	{"SMO8500",  KXCJ91008},
 	{ },

drivers/iio/accel/mma9551_core.c

@@ -374,7 +374,7 @@ EXPORT_SYMBOL(mma9551_read_status_word);
  * @app_id:	Application ID
  * @reg:	Application register
  * @len:	Length of array to read in bytes
- * @val:	Array of words to read
+ * @buf:	Array of words to read
  *
  * Read multiple configuration registers (word-sized registers).
  *
@@ -409,7 +409,7 @@ EXPORT_SYMBOL(mma9551_read_config_words);
  * @app_id:	Application ID
  * @reg:	Application register
  * @len:	Length of array to read in bytes
- * @val:	Array of words to read
+ * @buf:	Array of words to read
  *
  * Read multiple status registers (word-sized registers).
  *
@@ -444,7 +444,7 @@ EXPORT_SYMBOL(mma9551_read_status_words);
  * @app_id:	Application ID
  * @reg:	Application register
  * @len:	Length of array to write in bytes
- * @val:	Array of words to write
+ * @buf:	Array of words to write
  *
  * Write multiple configuration registers (word-sized registers).
  *
@@ -785,7 +785,7 @@ EXPORT_SYMBOL(mma9551_read_accel_scale);
  */
 int mma9551_app_reset(struct i2c_client *client, u32 app_mask)
 {
-	return mma9551_write_config_byte(client, MMA9551_APPID_RCS,
+	return mma9551_write_config_byte(client, MMA9551_APPID_RSC,
 					 MMA9551_RSC_RESET +
 					 MMA9551_RSC_OFFSET(app_mask),
 					 MMA9551_RSC_VAL(app_mask));

drivers/iio/accel/mma9551_core.h

@@ -22,7 +22,7 @@
 #define MMA9551_APPID_TILT		0x0B
 #define MMA9551_APPID_SLEEP_WAKE	0x12
 #define MMA9551_APPID_PEDOMETER	        0x15
-#define MMA9551_APPID_RCS		0x17
+#define MMA9551_APPID_RSC		0x17
 #define MMA9551_APPID_NONE		0xff
 
 /* Reset/Suspend/Clear application app masks */

drivers/iio/accel/mma9553.c

@@ -62,8 +62,8 @@
 #define MMA9553_MASK_STATUS_STEPCHG		BIT(13)
 #define MMA9553_MASK_STATUS_ACTCHG		BIT(12)
 #define MMA9553_MASK_STATUS_SUSP		BIT(11)
-#define MMA9553_MASK_STATUS_ACTIVITY		(BIT(10) | BIT(9) | BIT(8))
-#define MMA9553_MASK_STATUS_VERSION		0x00FF
+#define MMA9553_MASK_STATUS_ACTIVITY		GENMASK(10, 8)
+#define MMA9553_MASK_STATUS_VERSION		GENMASK(7, 0)
 
 #define MMA9553_REG_STEPCNT			0x02
 #define MMA9553_REG_DISTANCE			0x04
@@ -75,14 +75,15 @@
 #define MMA9553_DEFAULT_GPIO_PIN	mma9551_gpio6
 #define MMA9553_DEFAULT_GPIO_POLARITY	0
 
-/* Bitnum used for gpio configuration = bit number in high status byte */
-#define STATUS_TO_BITNUM(bit)		(ffs(bit) - 9)
+/* Bitnum used for GPIO configuration = bit number in high status byte */
+#define MMA9553_STATUS_TO_BITNUM(bit)	(ffs(bit) - 9)
+#define MMA9553_MAX_BITNUM		MMA9553_STATUS_TO_BITNUM(BIT(16))
 
 #define MMA9553_DEFAULT_SAMPLE_RATE	30	/* Hz */
 
 /*
  * The internal activity level must be stable for ACTTHD samples before
- * ACTIVITY is updated.The ACTIVITY variable contains the current activity
+ * ACTIVITY is updated. The ACTIVITY variable contains the current activity
  * level and is updated every time a step is detected or once a second
  * if there are no steps.
  */
@@ -353,11 +354,11 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
 	 * This bit is the logical OR of the SUSPCHG, STEPCHG, and ACTCHG flags.
 	 */
 	if (activity_enabled && ev_step_detect->enabled)
-		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
+		bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_MRGFL);
 	else if (ev_step_detect->enabled)
-		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
+		bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_STEPCHG);
 	else if (activity_enabled)
-		bitnum = STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
+		bitnum = MMA9553_STATUS_TO_BITNUM(MMA9553_MASK_STATUS_ACTCHG);
 	else			/* Reset */
 		appid = MMA9551_APPID_NONE;
 
@@ -365,9 +366,12 @@ static int mma9553_conf_gpio(struct mma9553_data *data)
 		return 0;
 
 	/* Save initial values for activity and stepcnt */
-	if (activity_enabled || ev_step_detect->enabled)
-		mma9553_read_activity_stepcnt(data, &data->activity,
-					      &data->stepcnt);
+	if (activity_enabled || ev_step_detect->enabled) {
+		ret = mma9553_read_activity_stepcnt(data, &data->activity,
+						    &data->stepcnt);
+		if (ret < 0)
+			return ret;
+	}
 
 	ret = mma9551_gpio_config(data->client,
 				  MMA9553_DEFAULT_GPIO_PIN,
@@ -398,13 +402,13 @@ static int mma9553_init(struct mma9553_data *data)
 				      sizeof(data->conf), (u16 *) &data->conf);
 	if (ret < 0) {
 		dev_err(&data->client->dev,
-			"device is not MMA9553L: failed to read cfg regs\n");
+			"failed to read configuration registers\n");
 		return ret;
 	}
 
 
-	/* Reset gpio */
-	data->gpio_bitnum = -1;
+	/* Reset GPIO */
+	data->gpio_bitnum = MMA9553_MAX_BITNUM;
 	ret = mma9553_conf_gpio(data);
 	if (ret < 0)
 		return ret;
@@ -438,6 +442,32 @@ static int mma9553_init(struct mma9553_data *data)
 	return mma9551_set_device_state(data->client, true);
 }
 
+static int mma9553_read_status_word(struct mma9553_data *data, u16 reg,
+				    u16 *tmp)
+{
+	bool powered_on;
+	int ret;
+
+	/*
+	 * The HW only counts steps and other dependent
+	 * parameters (speed, distance, calories, activity)
+	 * if power is on (from enabling an event or the
+	 * step counter).
+	 */
+	powered_on = mma9553_is_any_event_enabled(data, false, 0) ||
+		     data->stepcnt_enabled;
+	if (!powered_on) {
+		dev_err(&data->client->dev, "No channels enabled\n");
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->mutex);
+	ret = mma9551_read_status_word(data->client, MMA9551_APPID_PEDOMETER,
+				       reg, tmp);
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
 static int mma9553_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan,
 			    int *val, int *val2, long mask)
@@ -446,69 +476,30 @@ static int mma9553_read_raw(struct iio_dev *indio_dev,
 	int ret;
 	u16 tmp;
 	u8 activity;
-	bool powered_on;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_PROCESSED:
 		switch (chan->type) {
 		case IIO_STEPS:
-			/*
-			 * The HW only counts steps and other dependent
-			 * parameters (speed, distance, calories, activity)
-			 * if power is on (from enabling an event or the
-			 * step counter */
-			powered_on =
-			    mma9553_is_any_event_enabled(data, false, 0) ||
-			    data->stepcnt_enabled;
-			if (!powered_on) {
-				dev_err(&data->client->dev,
-					"No channels enabled\n");
-				return -EINVAL;
-			}
-			mutex_lock(&data->mutex);
-			ret = mma9551_read_status_word(data->client,
-						       MMA9551_APPID_PEDOMETER,
+			ret = mma9553_read_status_word(data,
 						       MMA9553_REG_STEPCNT,
 						       &tmp);
-			mutex_unlock(&data->mutex);
 			if (ret < 0)
 				return ret;
 			*val = tmp;
 			return IIO_VAL_INT;
 		case IIO_DISTANCE:
-			powered_on =
-			    mma9553_is_any_event_enabled(data, false, 0) ||
-			    data->stepcnt_enabled;
-			if (!powered_on) {
-				dev_err(&data->client->dev,
-					"No channels enabled\n");
-				return -EINVAL;
-			}
-			mutex_lock(&data->mutex);
-			ret = mma9551_read_status_word(data->client,
-						       MMA9551_APPID_PEDOMETER,
+			ret = mma9553_read_status_word(data,
 						       MMA9553_REG_DISTANCE,
 						       &tmp);
-			mutex_unlock(&data->mutex);
 			if (ret < 0)
 				return ret;
 			*val = tmp;
 			return IIO_VAL_INT;
 		case IIO_ACTIVITY:
-			powered_on =
-			    mma9553_is_any_event_enabled(data, false, 0) ||
-			    data->stepcnt_enabled;
-			if (!powered_on) {
-				dev_err(&data->client->dev,
-					"No channels enabled\n");
-				return -EINVAL;
-			}
-			mutex_lock(&data->mutex);
-			ret = mma9551_read_status_word(data->client,
-						       MMA9551_APPID_PEDOMETER,
+			ret = mma9553_read_status_word(data,
 						       MMA9553_REG_STATUS,
 						       &tmp);
-			mutex_unlock(&data->mutex);
 			if (ret < 0)
 				return ret;
 
@@ -533,38 +524,17 @@ static int mma9553_read_raw(struct iio_dev *indio_dev,
 		case IIO_VELOCITY:	/* m/h */
 			if (chan->channel2 != IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z)
 				return -EINVAL;
-			powered_on =
-			    mma9553_is_any_event_enabled(data, false, 0) ||
-			    data->stepcnt_enabled;
-			if (!powered_on) {
-				dev_err(&data->client->dev,
-					"No channels enabled\n");
-				return -EINVAL;
-			}
-			mutex_lock(&data->mutex);
-			ret = mma9551_read_status_word(data->client,
-						       MMA9551_APPID_PEDOMETER,
-						       MMA9553_REG_SPEED, &tmp);
-			mutex_unlock(&data->mutex);
+			ret = mma9553_read_status_word(data,
+						       MMA9553_REG_SPEED,
+						       &tmp);
 			if (ret < 0)
 				return ret;
 			*val = tmp;
 			return IIO_VAL_INT;
 		case IIO_ENERGY:	/* Cal or kcal */
-			powered_on =
-			    mma9553_is_any_event_enabled(data, false, 0) ||
-			    data->stepcnt_enabled;
-			if (!powered_on) {
-				dev_err(&data->client->dev,
-					"No channels enabled\n");
-				return -EINVAL;
-			}
-			mutex_lock(&data->mutex);
-			ret = mma9551_read_status_word(data->client,
-						       MMA9551_APPID_PEDOMETER,
+			ret = mma9553_read_status_word(data,
 						       MMA9553_REG_CALORIES,
 						       &tmp);
-			mutex_unlock(&data->mutex);
 			if (ret < 0)
 				return ret;
 			*val = tmp;
@@ -791,7 +761,7 @@ static int mma9553_write_event_config(struct iio_dev *indio_dev,
 
 	mutex_unlock(&data->mutex);
 
-	return ret;
+	return 0;
 
 err_conf_gpio:
 	if (state) {
@@ -896,7 +866,7 @@ static int mma9553_get_calibgender_mode(struct iio_dev *indio_dev,
 	gender = mma9553_get_bits(data->conf.filter, MMA9553_MASK_CONF_MALE);
 	/*
 	 * HW expects 0 for female and 1 for male,
-	 * while iio index is 0 for male and 1 for female
+	 * while iio index is 0 for male and 1 for female.
 	 */
 	return !gender;
 }
@@ -943,11 +913,11 @@ static const struct iio_event_spec mma9553_activity_events[] = {
 	},
 };
 
-static const char * const calibgender_modes[] = { "male", "female" };
+static const char * const mma9553_calibgender_modes[] = { "male", "female" };
 
 static const struct iio_enum mma9553_calibgender_enum = {
-	.items = calibgender_modes,
-	.num_items = ARRAY_SIZE(calibgender_modes),
+	.items = mma9553_calibgender_modes,
+	.num_items = ARRAY_SIZE(mma9553_calibgender_modes),
 	.get = mma9553_get_calibgender_mode,
 	.set = mma9553_set_calibgender_mode,
 };
@@ -1108,16 +1078,16 @@ static int mma9553_gpio_probe(struct i2c_client *client)
 
 	dev = &client->dev;
 
-	/* data ready gpio interrupt pin */
+	/* data ready GPIO interrupt pin */
 	gpio = devm_gpiod_get_index(dev, MMA9553_GPIO_NAME, 0, GPIOD_IN);
 	if (IS_ERR(gpio)) {
-		dev_err(dev, "acpi gpio get index failed\n");
+		dev_err(dev, "ACPI GPIO get index failed\n");
 		return PTR_ERR(gpio);
 	}
 
 	ret = gpiod_to_irq(gpio);
 
-	dev_dbg(dev, "gpio resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
+	dev_dbg(dev, "GPIO resource, no:%d irq:%d\n", desc_to_gpio(gpio), ret);
 
 	return ret;
 }

drivers/iio/adc/ti_am335x_adc.c

@@ -395,16 +395,30 @@ static const struct iio_info tiadc_info = {
 	.driver_module = THIS_MODULE,
 };
 
+static int tiadc_parse_dt(struct platform_device *pdev,
+			  struct tiadc_device *adc_dev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct property *prop;
+	const __be32 *cur;
+	int channels = 0;
+	u32 val;
+
+	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
+		adc_dev->channel_line[channels] = val;
+		channels++;
+	}
+
+	adc_dev->channels = channels;
+	return 0;
+}
+
 static int tiadc_probe(struct platform_device *pdev)
 {
 	struct iio_dev		*indio_dev;
 	struct tiadc_device	*adc_dev;
 	struct device_node	*node = pdev->dev.of_node;
-	struct property		*prop;
-	const __be32		*cur;
 	int			err;
-	u32			val;
-	int			channels = 0;
 
 	if (!node) {
 		dev_err(&pdev->dev, "Could not find valid DT data.\n");
@@ -420,12 +434,7 @@ static int tiadc_probe(struct platform_device *pdev)
 	adc_dev = iio_priv(indio_dev);
 
 	adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
-
-	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
-		adc_dev->channel_line[channels] = val;
-		channels++;
-	}
-	adc_dev->channels = channels;
+	tiadc_parse_dt(pdev, adc_dev);
 
 	indio_dev->dev.parent = &pdev->dev;
 	indio_dev->name = dev_name(&pdev->dev);

drivers/iio/common/st_sensors/st_sensors_core.c

@@ -245,6 +245,16 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 {
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
 
+	/* Sensor does not support interrupts */
+	if (sdata->sensor_settings->drdy_irq.addr == 0) {
+		if (pdata->drdy_int_pin)
+			dev_info(&indio_dev->dev,
+				 "DRDY on pin INT%d specified, but sensor "
+				 "does not support interrupts\n",
+				 pdata->drdy_int_pin);
+		return 0;
+	}
+
 	switch (pdata->drdy_int_pin) {
 	case 1:
 		if (sdata->sensor_settings->drdy_irq.mask_int1 == 0) {
@@ -285,7 +295,7 @@ static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev,
 	if (!of_property_read_u32(np, "st,drdy-int-pin", &val) && (val <= 2))
 		pdata->drdy_int_pin = (u8) val;
 	else
-		pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 1;
+		pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 0;
 
 	return pdata;
 }
@@ -334,11 +344,13 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 		return err;
 
 	/* set BDU */
-	err = st_sensors_write_data_with_mask(indio_dev,
+	if (sdata->sensor_settings->bdu.addr) {
+		err = st_sensors_write_data_with_mask(indio_dev,
 					sdata->sensor_settings->bdu.addr,
 					sdata->sensor_settings->bdu.mask, true);
-	if (err < 0)
-		return err;
+		if (err < 0)
+			return err;
+	}
 
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 
@@ -491,7 +503,8 @@ int st_sensors_check_device_support(struct iio_dev *indio_dev,
 			break;
 	}
 	if (n == ARRAY_SIZE(sensor_settings[i].sensors_supported)) {
-		dev_err(&indio_dev->dev, "device name and WhoAmI mismatch.\n");
+		dev_err(&indio_dev->dev, "device name \"%s\" and WhoAmI (0x%02x) mismatch",
+			indio_dev->name, wai);
 		goto sensor_name_mismatch;
 	}
 

drivers/iio/common/st_sensors/st_sensors_trigger.c

@@ -37,8 +37,10 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 			IRQF_TRIGGER_RISING,
 			sdata->trig->name,
 			sdata->trig);
-	if (err)
+	if (err) {
+		dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n");
 		goto request_irq_error;
+	}
 
 	iio_trigger_set_drvdata(sdata->trig, indio_dev);
 	sdata->trig->ops = trigger_ops;

drivers/iio/industrialio-core.c

@@ -128,6 +128,7 @@ static const char * const iio_chan_info_postfix[] = {
 	[IIO_CHAN_INFO_CALIBWEIGHT] = "calibweight",
 	[IIO_CHAN_INFO_DEBOUNCE_COUNT] = "debounce_count",
 	[IIO_CHAN_INFO_DEBOUNCE_TIME] = "debounce_time",
+	[IIO_CHAN_INFO_CALIBEMISSIVITY] = "calibemissivity",
 };
 
 /**

drivers/iio/light/Kconfig

@@ -169,7 +169,8 @@ config LTR501
 	select IIO_TRIGGERED_BUFFER
 	help
 	 If you say yes here you get support for the Lite-On LTR-501ALS-01
-	 ambient light and proximity sensor.
+	 ambient light and proximity sensor. This driver also supports LTR-559
+	 ALS/PS or LTR-301 ALS sensors.
 
 	 This driver can also be built as a module.  If so, the module
          will be called ltr501.

drivers/iio/light/tsl2563.c

@@ -240,7 +240,7 @@ static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
  * convert between normalized values and HW values obtained using given
  * timing and gain settings.
  */
-static int adc_shiftbits(u8 timing)
+static int tsl2563_adc_shiftbits(u8 timing)
 {
 	int shift = 0;
 
@@ -263,9 +263,9 @@ static int adc_shiftbits(u8 timing)
 }
 
 /* Convert a HW ADC value to normalized scale. */
-static u32 normalize_adc(u16 adc, u8 timing)
+static u32 tsl2563_normalize_adc(u16 adc, u8 timing)
 {
-	return adc << adc_shiftbits(timing);
+	return adc << tsl2563_adc_shiftbits(timing);
 }
 
 static void tsl2563_wait_adc(struct tsl2563_chip *chip)
@@ -350,8 +350,8 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
 		retry = tsl2563_adjust_gainlevel(chip, adc0);
 	}
 
-	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
-	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
+	chip->data0 = tsl2563_normalize_adc(adc0, chip->gainlevel->gaintime);
+	chip->data1 = tsl2563_normalize_adc(adc1, chip->gainlevel->gaintime);
 
 	if (!chip->int_enabled)
 		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
@@ -361,13 +361,13 @@ static int tsl2563_get_adc(struct tsl2563_chip *chip)
 	return ret;
 }
 
-static inline int calib_to_sysfs(u32 calib)
+static inline int tsl2563_calib_to_sysfs(u32 calib)
 {
 	return (int) (((calib * CALIB_BASE_SYSFS) +
 		       CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
 }
 
-static inline u32 calib_from_sysfs(int value)
+static inline u32 tsl2563_calib_from_sysfs(int value)
 {
 	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
 }
@@ -426,7 +426,7 @@ static const struct tsl2563_lux_coeff lux_table[] = {
 };
 
 /* Convert normalized, scaled ADC values to lux. */
-static unsigned int adc_to_lux(u32 adc0, u32 adc1)
+static unsigned int tsl2563_adc_to_lux(u32 adc0, u32 adc1)
 {
 	const struct tsl2563_lux_coeff *lp = lux_table;
 	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
@@ -442,7 +442,7 @@ static unsigned int adc_to_lux(u32 adc0, u32 adc1)
 }
 
 /* Apply calibration coefficient to ADC count. */
-static u32 calib_adc(u32 adc, u32 calib)
+static u32 tsl2563_calib_adc(u32 adc, u32 calib)
 {
 	unsigned long scaled = adc;
 
@@ -463,9 +463,9 @@ static int tsl2563_write_raw(struct iio_dev *indio_dev,
 	if (mask != IIO_CHAN_INFO_CALIBSCALE)
 		return -EINVAL;
 	if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
-		chip->calib0 = calib_from_sysfs(val);
+		chip->calib0 = tsl2563_calib_from_sysfs(val);
 	else if (chan->channel2 == IIO_MOD_LIGHT_IR)
-		chip->calib1 = calib_from_sysfs(val);
+		chip->calib1 = tsl2563_calib_from_sysfs(val);
 	else
 		return -EINVAL;
 
@@ -491,11 +491,11 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 			ret = tsl2563_get_adc(chip);
 			if (ret)
 				goto error_ret;
-			calib0 = calib_adc(chip->data0, chip->calib0) *
+			calib0 = tsl2563_calib_adc(chip->data0, chip->calib0) *
 				chip->cover_comp_gain;
-			calib1 = calib_adc(chip->data1, chip->calib1) *
+			calib1 = tsl2563_calib_adc(chip->data1, chip->calib1) *
 				chip->cover_comp_gain;
-			*val = adc_to_lux(calib0, calib1);
+			*val = tsl2563_adc_to_lux(calib0, calib1);
 			ret = IIO_VAL_INT;
 			break;
 		case IIO_INTENSITY:
@@ -515,9 +515,9 @@ static int tsl2563_read_raw(struct iio_dev *indio_dev,
 
 	case IIO_CHAN_INFO_CALIBSCALE:
 		if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
-			*val = calib_to_sysfs(chip->calib0);
+			*val = tsl2563_calib_to_sysfs(chip->calib0);
 		else
-			*val = calib_to_sysfs(chip->calib1);
+			*val = tsl2563_calib_to_sysfs(chip->calib1);
 		ret = IIO_VAL_INT;
 		break;
 	default:
@@ -750,8 +750,8 @@ static int tsl2563_probe(struct i2c_client *client,
 	chip->high_thres = 0xffff;
 	chip->gainlevel = tsl2563_gainlevel_table;
 	chip->intr = TSL2563_INT_PERSIST(4);
-	chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS);
-	chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS);
+	chip->calib0 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
+	chip->calib1 = tsl2563_calib_from_sysfs(CALIB_BASE_SYSFS);
 
 	if (pdata)
 		chip->cover_comp_gain = pdata->cover_comp_gain;

drivers/iio/light/tsl4531.c

@@ -24,12 +24,12 @@
 
 #define TSL4531_DRV_NAME "tsl4531"
 
-#define TCS3472_COMMAND BIT(7)
+#define TSL4531_COMMAND BIT(7)
 
-#define TSL4531_CONTROL (TCS3472_COMMAND | 0x00)
-#define TSL4531_CONFIG (TCS3472_COMMAND | 0x01)
-#define TSL4531_DATA (TCS3472_COMMAND | 0x04)
-#define TSL4531_ID (TCS3472_COMMAND | 0x0a)
+#define TSL4531_CONTROL (TSL4531_COMMAND | 0x00)
+#define TSL4531_CONFIG (TSL4531_COMMAND | 0x01)
+#define TSL4531_DATA (TSL4531_COMMAND | 0x04)
+#define TSL4531_ID (TSL4531_COMMAND | 0x0a)
 
 /* operating modes in control register */
 #define TSL4531_MODE_POWERDOWN 0x00

drivers/iio/magnetometer/st_magn.h

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/iio/common/st_sensors.h>
 
+#define LSM303DLH_MAGN_DEV_NAME		"lsm303dlh_magn"
 #define LSM303DLHC_MAGN_DEV_NAME	"lsm303dlhc_magn"
 #define LSM303DLM_MAGN_DEV_NAME		"lsm303dlm_magn"
 #define LIS3MDL_MAGN_DEV_NAME		"lis3mdl"

drivers/iio/magnetometer/st_magn_core.c

@@ -45,6 +45,46 @@
 #define ST_MAGN_FS_AVL_12000MG			12000
 #define ST_MAGN_FS_AVL_16000MG			16000
 
+/* CUSTOM VALUES FOR SENSOR 0 */
+#define ST_MAGN_0_ODR_ADDR			0x00
+#define ST_MAGN_0_ODR_MASK			0x1c
+#define ST_MAGN_0_ODR_AVL_1HZ_VAL		0x00
+#define ST_MAGN_0_ODR_AVL_2HZ_VAL		0x01
+#define ST_MAGN_0_ODR_AVL_3HZ_VAL		0x02
+#define ST_MAGN_0_ODR_AVL_8HZ_VAL		0x03
+#define ST_MAGN_0_ODR_AVL_15HZ_VAL		0x04
+#define ST_MAGN_0_ODR_AVL_30HZ_VAL		0x05
+#define ST_MAGN_0_ODR_AVL_75HZ_VAL		0x06
+#define ST_MAGN_0_ODR_AVL_220HZ_VAL		0x07
+#define ST_MAGN_0_PW_ADDR			0x02
+#define ST_MAGN_0_PW_MASK			0x03
+#define ST_MAGN_0_PW_ON				0x00
+#define ST_MAGN_0_PW_OFF			0x03
+#define ST_MAGN_0_FS_ADDR			0x01
+#define ST_MAGN_0_FS_MASK			0xe0
+#define ST_MAGN_0_FS_AVL_1300_VAL		0x01
+#define ST_MAGN_0_FS_AVL_1900_VAL		0x02
+#define ST_MAGN_0_FS_AVL_2500_VAL		0x03
+#define ST_MAGN_0_FS_AVL_4000_VAL		0x04
+#define ST_MAGN_0_FS_AVL_4700_VAL		0x05
+#define ST_MAGN_0_FS_AVL_5600_VAL		0x06
+#define ST_MAGN_0_FS_AVL_8100_VAL		0x07
+#define ST_MAGN_0_FS_AVL_1300_GAIN_XY		1100
+#define ST_MAGN_0_FS_AVL_1900_GAIN_XY		855
+#define ST_MAGN_0_FS_AVL_2500_GAIN_XY		670
+#define ST_MAGN_0_FS_AVL_4000_GAIN_XY		450
+#define ST_MAGN_0_FS_AVL_4700_GAIN_XY		400
+#define ST_MAGN_0_FS_AVL_5600_GAIN_XY		330
+#define ST_MAGN_0_FS_AVL_8100_GAIN_XY		230
+#define ST_MAGN_0_FS_AVL_1300_GAIN_Z		980
+#define ST_MAGN_0_FS_AVL_1900_GAIN_Z		760
+#define ST_MAGN_0_FS_AVL_2500_GAIN_Z		600
+#define ST_MAGN_0_FS_AVL_4000_GAIN_Z		400
+#define ST_MAGN_0_FS_AVL_4700_GAIN_Z		355
+#define ST_MAGN_0_FS_AVL_5600_GAIN_Z		295
+#define ST_MAGN_0_FS_AVL_8100_GAIN_Z		205
+#define ST_MAGN_0_MULTIREAD_BIT			false
+
 /* CUSTOM VALUES FOR SENSOR 1 */
 #define ST_MAGN_1_WAI_EXP			0x3c
 #define ST_MAGN_1_ODR_ADDR			0x00
@@ -150,6 +190,82 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 };
 
 static const struct st_sensor_settings st_magn_sensors_settings[] = {
+	{
+		.wai = 0, /* This sensor has no valid WhoAmI report 0 */
+		.sensors_supported = {
+			[0] = LSM303DLH_MAGN_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
+		.odr = {
+			.addr = ST_MAGN_0_ODR_ADDR,
+			.mask = ST_MAGN_0_ODR_MASK,
+			.odr_avl = {
+				{ 1, ST_MAGN_0_ODR_AVL_1HZ_VAL, },
+				{ 2, ST_MAGN_0_ODR_AVL_2HZ_VAL, },
+				{ 3, ST_MAGN_0_ODR_AVL_3HZ_VAL, },
+				{ 8, ST_MAGN_0_ODR_AVL_8HZ_VAL, },
+				{ 15, ST_MAGN_0_ODR_AVL_15HZ_VAL, },
+				{ 30, ST_MAGN_0_ODR_AVL_30HZ_VAL, },
+				{ 75, ST_MAGN_0_ODR_AVL_75HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_MAGN_0_PW_ADDR,
+			.mask = ST_MAGN_0_PW_MASK,
+			.value_on = ST_MAGN_0_PW_ON,
+			.value_off = ST_MAGN_0_PW_OFF,
+		},
+		.fs = {
+			.addr = ST_MAGN_0_FS_ADDR,
+			.mask = ST_MAGN_0_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_MAGN_FS_AVL_1300MG,
+					.value = ST_MAGN_0_FS_AVL_1300_VAL,
+					.gain = ST_MAGN_0_FS_AVL_1300_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_1300_GAIN_Z,
+				},
+				[1] = {
+					.num = ST_MAGN_FS_AVL_1900MG,
+					.value = ST_MAGN_0_FS_AVL_1900_VAL,
+					.gain = ST_MAGN_0_FS_AVL_1900_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_1900_GAIN_Z,
+				},
+				[2] = {
+					.num = ST_MAGN_FS_AVL_2500MG,
+					.value = ST_MAGN_0_FS_AVL_2500_VAL,
+					.gain = ST_MAGN_0_FS_AVL_2500_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_2500_GAIN_Z,
+				},
+				[3] = {
+					.num = ST_MAGN_FS_AVL_4000MG,
+					.value = ST_MAGN_0_FS_AVL_4000_VAL,
+					.gain = ST_MAGN_0_FS_AVL_4000_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_4000_GAIN_Z,
+				},
+				[4] = {
+					.num = ST_MAGN_FS_AVL_4700MG,
+					.value = ST_MAGN_0_FS_AVL_4700_VAL,
+					.gain = ST_MAGN_0_FS_AVL_4700_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_4700_GAIN_Z,
+				},
+				[5] = {
+					.num = ST_MAGN_FS_AVL_5600MG,
+					.value = ST_MAGN_0_FS_AVL_5600_VAL,
+					.gain = ST_MAGN_0_FS_AVL_5600_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_5600_GAIN_Z,
+				},
+				[6] = {
+					.num = ST_MAGN_FS_AVL_8100MG,
+					.value = ST_MAGN_0_FS_AVL_8100_VAL,
+					.gain = ST_MAGN_0_FS_AVL_8100_GAIN_XY,
+					.gain2 = ST_MAGN_0_FS_AVL_8100_GAIN_Z,
+				},
+			},
+		},
+		.multi_read_bit = ST_MAGN_0_MULTIREAD_BIT,
+		.bootime = 2,
+	},
 	{
 		.wai = ST_MAGN_1_WAI_EXP,
 		.sensors_supported = {

drivers/iio/magnetometer/st_magn_i2c.c

@@ -20,6 +20,10 @@
 
 #ifdef CONFIG_OF
 static const struct of_device_id st_magn_of_match[] = {
+	{
+		.compatible = "st,lsm303dlh-magn",
+		.data = LSM303DLH_MAGN_DEV_NAME,
+	},
 	{
 		.compatible = "st,lsm303dlhc-magn",
 		.data = LSM303DLHC_MAGN_DEV_NAME,
@@ -71,6 +75,7 @@ static int st_magn_i2c_remove(struct i2c_client *client)
 }
 
 static const struct i2c_device_id st_magn_id_table[] = {
+	{ LSM303DLH_MAGN_DEV_NAME },
 	{ LSM303DLHC_MAGN_DEV_NAME },
 	{ LSM303DLM_MAGN_DEV_NAME },
 	{ LIS3MDL_MAGN_DEV_NAME },

drivers/iio/temperature/tmp006.c

@@ -41,8 +41,8 @@
 #define TMP006_CONFIG_CR_MASK 0x0e00
 #define TMP006_CONFIG_CR_SHIFT 9
 
-#define MANUFACTURER_MAGIC 0x5449
-#define DEVICE_MAGIC 0x0067
+#define TMP006_MANUFACTURER_MAGIC 0x5449
+#define TMP006_DEVICE_MAGIC 0x0067
 
 struct tmp006_data {
 	struct i2c_client *client;
@@ -191,7 +191,7 @@ static bool tmp006_check_identification(struct i2c_client *client)
 	if (did < 0)
 		return false;
 
-	return mid == MANUFACTURER_MAGIC && did == DEVICE_MAGIC;
+	return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC;
 }
 
 static int tmp006_probe(struct i2c_client *client,

include/linux/iio/iio.h

@@ -43,6 +43,7 @@ enum iio_chan_info_enum {
 	IIO_CHAN_INFO_CALIBWEIGHT,
 	IIO_CHAN_INFO_DEBOUNCE_COUNT,
 	IIO_CHAN_INFO_DEBOUNCE_TIME,
+	IIO_CHAN_INFO_CALIBEMISSIVITY,
 };
 
 enum iio_shared_by {

tools/Makefile

@@ -8,6 +8,7 @@ help:
 	@echo '  cpupower   - a tool for all things x86 CPU power'
 	@echo '  firewire   - the userspace part of nosy, an IEEE-1394 traffic sniffer'
 	@echo '  hv         - tools used when in Hyper-V clients'
+	@echo '  iio        - IIO tools'
 	@echo '  lguest     - a minimal 32-bit x86 hypervisor'
 	@echo '  perf       - Linux performance measurement and analysis tool'
 	@echo '  selftests  - various kernel selftests'
@@ -41,7 +42,7 @@ acpi: FORCE
 cpupower: FORCE
 	$(call descend,power/$@)
 
-cgroup firewire hv guest usb virtio vm net: FORCE
+cgroup firewire hv guest usb virtio vm net iio: FORCE
 	$(call descend,$@)
 
 liblockdep: FORCE
@@ -91,7 +92,7 @@ acpi_clean:
 cpupower_clean:
 	$(call descend,power/cpupower,clean)
 
-cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean:
+cgroup_clean hv_clean firewire_clean lguest_clean usb_clean virtio_clean vm_clean net_clean iio_clean:
 	$(call descend,$(@:_clean=),clean)
 
 liblockdep_clean:
@@ -114,6 +115,6 @@ tmon_clean:
 
 clean: acpi_clean cgroup_clean cpupower_clean hv_clean firewire_clean lguest_clean \
 		perf_clean selftests_clean turbostat_clean usb_clean virtio_clean \
-		vm_clean net_clean x86_energy_perf_policy_clean tmon_clean
+		vm_clean net_clean iio_clean x86_energy_perf_policy_clean tmon_clean
 
 .PHONY: FORCE