Commit 5d30d03a authored by Alexandre Torgue's avatar Alexandre Torgue

arm64: dts: st: introduce stm32mp25 SoCs family

STM32MP25 family is composed of 4 SoCs defined as following:

-STM32MP251: common part composed of 1*Cortex-A35, common peripherals like
SDMMC, UART, SPI, I2C, PCIe, USB3, parallel and DSI display, 1*ETH ...

-STM32MP253: STM32MP251 + 1*Cortex-A35 (dual CPU), a second ETH, CAN-FD and
LVDS display.

-STM32MP255: STM32MP253 + GPU/AI and video encode/decode.
-STM32MP257: STM32MP255 + ETH TSN switch (2+1 ports).

A second diversity layer exists for security features/ A35 frequency:
-STM32MP25xY, "Y" gives information:
 -Y = A means A35@1.2GHz + no cryp IP and no secure boot.
 -Y = C means A35@1.2GHz + cryp IP and secure boot.
 -Y = D means A35@1.5GHz + no cryp IP and no secure boot.
 -Y = F means A35@1.5GHz + cryp IP and secure boot.
Signed-off-by: default avatarAlexandre Torgue <alexandre.torgue@foss.st.com>
parent 9e4e2441
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a35";
device_type = "cpu";
reg = <0>;
enable-method = "psci";
};
};
arm-pmu {
compatible = "arm,cortex-a35-pmu";
interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>;
interrupt-parent = <&intc>;
};
clocks {
ck_flexgen_08: ck-flexgen-08 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
ck_flexgen_51: ck-flexgen-51 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
ck_icn_ls_mcu: ck-icn-ls-mcu {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
scmi {
compatible = "linaro,scmi-optee";
#address-cells = <1>;
#size-cells = <0>;
linaro,optee-channel-id = <0>;
scmi_clk: protocol@14 {
reg = <0x14>;
#clock-cells = <1>;
};
scmi_reset: protocol@16 {
reg = <0x16>;
#reset-cells = <1>;
};
};
};
intc: interrupt-controller@4ac00000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
reg = <0x0 0x4ac10000 0x0 0x1000>,
<0x0 0x4ac20000 0x0 0x2000>,
<0x0 0x4ac40000 0x0 0x2000>,
<0x0 0x4ac60000 0x0 0x2000>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&intc>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
always-on;
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
ranges = <0x0 0x0 0x0 0x80000000>;
rifsc: rifsc-bus@42080000 {
compatible = "simple-bus";
reg = <0x42080000 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
usart2: serial@400e0000 {
compatible = "st,stm32h7-uart";
reg = <0x400e0000 0x400>;
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ck_flexgen_08>;
status = "disabled";
};
};
syscfg: syscon@44230000 {
compatible = "st,stm32mp25-syscfg", "syscon";
reg = <0x44230000 0x10000>;
};
pinctrl: pinctrl@44240000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp257-pinctrl";
ranges = <0 0x44240000 0xa0400>;
pins-are-numbered;
gpioa: gpio@44240000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x0 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOA";
status = "disabled";
};
gpiob: gpio@44250000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x10000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOB";
status = "disabled";
};
gpioc: gpio@44260000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x20000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOC";
status = "disabled";
};
gpiod: gpio@44270000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x30000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOD";
status = "disabled";
};
gpioe: gpio@44280000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x40000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOE";
status = "disabled";
};
gpiof: gpio@44290000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x50000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOF";
status = "disabled";
};
gpiog: gpio@442a0000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x60000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOG";
status = "disabled";
};
gpioh: gpio@442b0000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x70000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOH";
status = "disabled";
};
gpioi: gpio@442c0000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x80000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOI";
status = "disabled";
};
gpioj: gpio@442d0000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x90000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOJ";
status = "disabled";
};
gpiok: gpio@442e0000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0xa0000 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOK";
status = "disabled";
};
};
pinctrl_z: pinctrl@46200000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32mp257-z-pinctrl";
ranges = <0 0x46200000 0x400>;
pins-are-numbered;
gpioz: gpio@46200000 {
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
reg = <0 0x400>;
clocks = <&ck_icn_ls_mcu>;
st,bank-name = "GPIOZ";
st,bank-ioport = <11>;
status = "disabled";
};
};
};
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include "stm32mp251.dtsi"
/ {
cpus {
cpu1: cpu@1 {
compatible = "arm,cortex-a35";
device_type = "cpu";
reg = <1>;
enable-method = "psci";
};
};
arm-pmu {
interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>;
};
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include "stm32mp253.dtsi"
/ {
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
#include "stm32mp255.dtsi"
/ {
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/ {
};
// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause)
/*
* Copyright (C) STMicroelectronics 2023 - All Rights Reserved
* Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
*/
/ {
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment