ice: Change pf state behavior to protect reset path

Currently, there is no bit, or set of bits, that protect the entirety
of the reset path.

If the reset is originated by the driver, then the relevant
one of the following bits will be set when the reset is scheduled:
__ICE_PFR_REQ
__ICE_CORER_REQ
__ICE_GLOBR_REQ
This bit will not be cleared until after the rebuild has completed.

If the reset is originated by the FW, then the first the driver knows of
it will be the reception of the OICR interrupt.  The __ICE_RESET_OICR_RECV
bit will be set in the interrupt handler.  This will also be the indicator
in a SW originated reset that we have completed the pre-OICR tasks and
have informed the FW that a reset was requested.

To utilize these bits, change the function:
ice_is_reset_recovery_pending()
	to be:
ice_is_reset_in_progress()

The new function will check all of the above bits in the pf->state and
will return a true if one or more of these bits are set.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ice/ice.h

@@ -124,7 +124,7 @@ enum ice_state {
 	__ICE_DOWN,
 	__ICE_NEEDS_RESTART,
 	__ICE_PREPARED_FOR_RESET,	/* set by driver when prepared */
-	__ICE_RESET_RECOVERY_PENDING,	/* set by driver when reset starts */
+	__ICE_RESET_OICR_RECV,		/* set by driver after rcv reset OICR */
 	__ICE_PFR_REQ,			/* set by driver and peers */
 	__ICE_CORER_REQ,		/* set by driver and peers */
 	__ICE_GLOBR_REQ,		/* set by driver and peers */

drivers/net/ethernet/intel/ice/ice_lib.c

@@ -2250,7 +2250,7 @@ int ice_vsi_release(struct ice_vsi *vsi)
 	 * currently. This is done to avoid check_flush_dependency() warning
 	 * on this wq
 	 */
-	if (vsi->netdev && !ice_is_reset_recovery_pending(pf->state)) {
+	if (vsi->netdev && !ice_is_reset_in_progress(pf->state)) {
 		unregister_netdev(vsi->netdev);
 		free_netdev(vsi->netdev);
 		vsi->netdev = NULL;
@@ -2280,7 +2280,7 @@ int ice_vsi_release(struct ice_vsi *vsi)
 	 * free VSI netdev when PF is not in reset recovery pending state,\
 	 * for ex: during rmmod.
 	 */
-	if (!ice_is_reset_recovery_pending(pf->state))
+	if (!ice_is_reset_in_progress(pf->state))
 		ice_vsi_clear(vsi);
 
 	return 0;
@@ -2367,10 +2367,13 @@ int ice_vsi_rebuild(struct ice_vsi *vsi)
 }
 
 /**
- * ice_is_reset_recovery_pending - schedule a reset
+ * ice_is_reset_in_progress - check for a reset in progress
  * @state: pf state field
  */
-bool ice_is_reset_recovery_pending(unsigned long *state)
+bool ice_is_reset_in_progress(unsigned long *state)
 {
-	return test_bit(__ICE_RESET_RECOVERY_PENDING, state);
+	return test_bit(__ICE_RESET_OICR_RECV, state) ||
+	       test_bit(__ICE_PFR_REQ, state) ||
+	       test_bit(__ICE_CORER_REQ, state) ||
+	       test_bit(__ICE_GLOBR_REQ, state);
 }

drivers/net/ethernet/intel/ice/ice_lib.h

@@ -54,7 +54,7 @@ ice_get_res(struct ice_pf *pf, struct ice_res_tracker *res, u16 needed, u16 id);
 
 int ice_vsi_rebuild(struct ice_vsi *vsi);
 
-bool ice_is_reset_recovery_pending(unsigned long *state);
+bool ice_is_reset_in_progress(unsigned long *state);
 
 void ice_vsi_free_q_vectors(struct ice_vsi *vsi);
 

drivers/net/ethernet/intel/ice/ice_main.c

@@ -364,21 +364,17 @@ static void ice_do_reset(struct ice_pf *pf, enum ice_reset_req reset_type)
 	dev_dbg(dev, "reset_type 0x%x requested\n", reset_type);
 	WARN_ON(in_interrupt());
 
-	/* PFR is a bit of a special case because it doesn't result in an OICR
-	 * interrupt. Set pending bit here which otherwise gets set in the
-	 * OICR handler.
-	 */
-	if (reset_type == ICE_RESET_PFR)
-		set_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
-
 	ice_prepare_for_reset(pf);
 
 	/* trigger the reset */
 	if (ice_reset(hw, reset_type)) {
 		dev_err(dev, "reset %d failed\n", reset_type);
 		set_bit(__ICE_RESET_FAILED, pf->state);
-		clear_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
+		clear_bit(__ICE_RESET_OICR_RECV, pf->state);
 		clear_bit(__ICE_PREPARED_FOR_RESET, pf->state);
+		clear_bit(__ICE_PFR_REQ, pf->state);
+		clear_bit(__ICE_CORER_REQ, pf->state);
+		clear_bit(__ICE_GLOBR_REQ, pf->state);
 		return;
 	}
 
@@ -389,8 +385,8 @@ static void ice_do_reset(struct ice_pf *pf, enum ice_reset_req reset_type)
 	if (reset_type == ICE_RESET_PFR) {
 		pf->pfr_count++;
 		ice_rebuild(pf);
-		clear_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
 		clear_bit(__ICE_PREPARED_FOR_RESET, pf->state);
+		clear_bit(__ICE_PFR_REQ, pf->state);
 	}
 }
 
@@ -405,14 +401,14 @@ static void ice_reset_subtask(struct ice_pf *pf)
 	/* When a CORER/GLOBR/EMPR is about to happen, the hardware triggers an
 	 * OICR interrupt. The OICR handler (ice_misc_intr) determines what type
 	 * of reset is pending and sets bits in pf->state indicating the reset
-	 * type and __ICE_RESET_RECOVERY_PENDING.  So, if the latter bit is set
+	 * type and __ICE_RESET_OICR_RECV.  So, if the latter bit is set
 	 * prepare for pending reset if not already (for PF software-initiated
 	 * global resets the software should already be prepared for it as
 	 * indicated by __ICE_PREPARED_FOR_RESET; for global resets initiated
 	 * by firmware or software on other PFs, that bit is not set so prepare
 	 * for the reset now), poll for reset done, rebuild and return.
 	 */
-	if (ice_is_reset_recovery_pending(pf->state)) {
+	if (test_bit(__ICE_RESET_OICR_RECV, pf->state)) {
 		clear_bit(__ICE_GLOBR_RECV, pf->state);
 		clear_bit(__ICE_CORER_RECV, pf->state);
 		if (!test_bit(__ICE_PREPARED_FOR_RESET, pf->state))
@@ -428,19 +424,22 @@ static void ice_reset_subtask(struct ice_pf *pf)
 			/* clear bit to resume normal operations, but
 			 * ICE_NEEDS_RESTART bit is set incase rebuild failed
 			 */
-			clear_bit(__ICE_RESET_RECOVERY_PENDING, pf->state);
+			clear_bit(__ICE_RESET_OICR_RECV, pf->state);
 			clear_bit(__ICE_PREPARED_FOR_RESET, pf->state);
+			clear_bit(__ICE_PFR_REQ, pf->state);
+			clear_bit(__ICE_CORER_REQ, pf->state);
+			clear_bit(__ICE_GLOBR_REQ, pf->state);
 		}
 
 		return;
 	}
 
 	/* No pending resets to finish processing. Check for new resets */
-	if (test_and_clear_bit(__ICE_PFR_REQ, pf->state))
+	if (test_bit(__ICE_PFR_REQ, pf->state))
 		reset_type = ICE_RESET_PFR;
-	if (test_and_clear_bit(__ICE_CORER_REQ, pf->state))
+	if (test_bit(__ICE_CORER_REQ, pf->state))
 		reset_type = ICE_RESET_CORER;
-	if (test_and_clear_bit(__ICE_GLOBR_REQ, pf->state))
+	if (test_bit(__ICE_GLOBR_REQ, pf->state))
 		reset_type = ICE_RESET_GLOBR;
 	/* If no valid reset type requested just return */
 	if (reset_type == ICE_RESET_INVAL)
@@ -1029,7 +1028,7 @@ static void ice_service_task(struct work_struct *work)
 	ice_reset_subtask(pf);
 
 	/* bail if a reset/recovery cycle is pending or rebuild failed */
-	if (ice_is_reset_recovery_pending(pf->state) ||
+	if (ice_is_reset_in_progress(pf->state) ||
 	    test_bit(__ICE_SUSPENDED, pf->state) ||
 	    test_bit(__ICE_NEEDS_RESTART, pf->state)) {
 		ice_service_task_complete(pf);
@@ -1250,8 +1249,7 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
 		 * We also make note of which reset happened so that peer
 		 * devices/drivers can be informed.
 		 */
-		if (!test_and_set_bit(__ICE_RESET_RECOVERY_PENDING,
-				      pf->state)) {
+		if (!test_and_set_bit(__ICE_RESET_OICR_RECV, pf->state)) {
 			if (reset == ICE_RESET_CORER)
 				set_bit(__ICE_CORER_RECV, pf->state);
 			else if (reset == ICE_RESET_GLOBR)
@@ -1265,7 +1263,7 @@ static irqreturn_t ice_misc_intr(int __always_unused irq, void *data)
 			 * is received and set back to false after the driver
 			 * has determined that the hardware is out of reset.
 			 *
-			 * __ICE_RESET_RECOVERY_PENDING in pf->state indicates
+			 * __ICE_RESET_OICR_RECV in pf->state indicates
 			 * that a post reset rebuild is required before the
 			 * driver is operational again. This is set above.
 			 *
@@ -1355,7 +1353,7 @@ static int ice_req_irq_msix_misc(struct ice_pf *pf)
 	 * lost during reset. Note that this function is called only during
 	 * rebuild path and not while reset is in progress.
 	 */
-	if (ice_is_reset_recovery_pending(pf->state))
+	if (ice_is_reset_in_progress(pf->state))
 		goto skip_req_irq;
 
 	/* reserve one vector in irq_tracker for misc interrupts */
@@ -1637,7 +1635,7 @@ static int ice_setup_pf_sw(struct ice_pf *pf)
 	struct ice_vsi *vsi;
 	int status = 0;
 
-	if (ice_is_reset_recovery_pending(pf->state))
+	if (ice_is_reset_in_progress(pf->state))
 		return -EBUSY;
 
 	vsi = ice_pf_vsi_setup(pf, pf->hw.port_info);
@@ -2203,7 +2201,7 @@ static int ice_set_mac_address(struct net_device *netdev, void *pi)
 	}
 
 	if (test_bit(__ICE_DOWN, pf->state) ||
-	    ice_is_reset_recovery_pending(pf->state)) {
+	    ice_is_reset_in_progress(pf->state)) {
 		netdev_err(netdev, "can't set mac %pM. device not ready\n",
 			   mac);
 		return -EBUSY;
@@ -3256,7 +3254,7 @@ static int ice_change_mtu(struct net_device *netdev, int new_mtu)
 	}
 	/* if a reset is in progress, wait for some time for it to complete */
 	do {
-		if (ice_is_reset_recovery_pending(pf->state)) {
+		if (ice_is_reset_in_progress(pf->state)) {
 			count++;
 			usleep_range(1000, 2000);
 		} else {