Commit 5e19c0b0 authored by Matt Roper's avatar Matt Roper

drm/i915: Expand documentation for gen12 DP pre-enable sequence

Rather than just specifying the bullet numbers from the bspec (e.g.,
"4.b") actually include the description of what the bspec wants us to
do.  Steps can be renumbered or moved so including the description will
help us match the code up to the spec.  Plus if we add support for new
platforms, some of the steps may be added/removed so more descriptive
comments will be useful for ensuring all of the bspec requirements are
met.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: default avatarMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107174527.11165-1-matthew.d.roper@intel.comReviewed-by: default avatarLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: default avatarJosé Roberto de Souza <jose.souza@intel.com>
parent 1d1d0af6
......@@ -3438,48 +3438,86 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
intel_dp->regs.dp_tp_ctl = TGL_DP_TP_CTL(transcoder);
intel_dp->regs.dp_tp_status = TGL_DP_TP_STATUS(transcoder);
/* 1.a got on intel_atomic_commit_tail() */
/*
* 1. Enable Power Wells
*
* This was handled at the beginning of intel_atomic_commit_tail(),
* before we called down into this function.
*/
/* 2. */
/* 2. Enable Panel Power if PPS is required */
intel_edp_panel_on(intel_dp);
/*
* 1.b, 3. and 4.a is done before tgl_ddi_pre_enable_dp() by:
* haswell_crtc_enable()->intel_encoders_pre_pll_enable() and
* haswell_crtc_enable()->intel_enable_shared_dpll()
* 3. For non-TBT Type-C ports, set FIA lane count
* (DFLEXDPSP.DPX4TXLATC)
*
* This was done before tgl_ddi_pre_enable_dp by
* haswell_crtc_enable()->intel_encoders_pre_pll_enable().
*/
/* 4.b */
/*
* 4. Enable the port PLL.
*
* The PLL enabling itself was already done before this function by
* haswell_crtc_enable()->intel_enable_shared_dpll(). We need only
* configure the PLL to port mapping here.
*/
intel_ddi_clk_select(encoder, crtc_state);
/* 5. */
/* 5. If IO power is controlled through PWR_WELL_CTL, Enable IO Power */
if (!intel_phy_is_tc(dev_priv, phy) ||
dig_port->tc_mode != TC_PORT_TBT_ALT)
intel_display_power_get(dev_priv,
dig_port->ddi_io_power_domain);
/* 6. */
/* 6. Program DP_MODE */
icl_program_mg_dp_mode(dig_port, crtc_state);
/*
* 7.a - single stream or multi-stream master transcoder: Configure
* Transcoder Clock Select. For additional MST streams this will be done
* by intel_mst_pre_enable_dp() after programming VC Payload ID through
* AUX.
* 7. The rest of the below are substeps under the bspec's "Enable and
* Train Display Port" step. Note that steps that are specific to
* MST will be handled by intel_mst_pre_enable_dp() before/after it
* calls into this function. Also intel_mst_pre_enable_dp() only calls
* us when active_mst_links==0, so any steps designated for "single
* stream or multi-stream master transcoder" can just be performed
* unconditionally here.
*/
/*
* 7.a Configure Transcoder Clock Select to direct the Port clock to the
* Transcoder.
*/
intel_ddi_enable_pipe_clock(crtc_state);
/* 7.b */
/*
* 7.b Configure TRANS_DDI_FUNC_CTL DDI Select, DDI Mode Select & MST
* Transport Select
*/
intel_ddi_config_transcoder_func(crtc_state);
/* 7.d */
/*
* 7.c Configure & enable DP_TP_CTL with link training pattern 1
* selected
*
* This will be handled by the intel_dp_start_link_train() farther
* down this function.
*/
/*
* 7.d Type C with DP alternate or fixed/legacy/static connection -
* Disable PHY clock gating per Type-C DDI Buffer page
*/
icl_phy_set_clock_gating(dig_port, false);
/* 7.e */
/* 7.e Configure voltage swing and related IO settings */
tgl_ddi_vswing_sequence(encoder, crtc_state->port_clock, level,
encoder->type);
/* 7.f */
/*
* 7.f Combo PHY: Configure PORT_CL_DW10 Static Power Down to power up
* the used lanes of the DDI.
*/
if (intel_phy_is_combo(dev_priv, phy)) {
bool lane_reversal =
dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
......@@ -3489,7 +3527,14 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
lane_reversal);
}
/* 7.g */
/*
* 7.g Configure and enable DDI_BUF_CTL
* 7.h Wait for DDI_BUF_CTL DDI Idle Status = 0b (Not Idle), timeout
* after 500 us.
*
* We only configure what the register value will be here. Actual
* enabling happens during link training farther down.
*/
intel_ddi_init_dp_buf_reg(encoder);
if (!is_mst)
......@@ -3502,10 +3547,17 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
* training
*/
intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
/* 7.c, 7.h, 7.i, 7.j */
/*
* 7.i Follow DisplayPort specification training sequence (see notes for
* failure handling)
* 7.j If DisplayPort multi-stream - Set DP_TP_CTL link training to Idle
* Pattern, wait for 5 idle patterns (DP_TP_STATUS Min_Idles_Sent)
* (timeout after 800 us)
*/
intel_dp_start_link_train(intel_dp);
/* 7.k */
/* 7.k Set DP_TP_CTL link training to Normal */
if (!is_trans_port_sync_mode(crtc_state))
intel_dp_stop_link_train(intel_dp);
......@@ -3518,7 +3570,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_encoder *encoder,
* so not enabling it for now.
*/
/* 7.l */
/* 7.l Configure and enable FEC if needed */
intel_ddi_enable_fec(encoder, crtc_state);
intel_dsc_enable(encoder, crtc_state);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment