arm64: dts: Fix TPM schema violations

Since commit 26c9d152 ("dt-bindings: tpm: Consolidate TCG TIS
bindings"), several issues are reported by "make dtbs_check" for arm64
devicetrees:

The compatible property needs to contain the chip's name in addition to
the generic "tcg,tpm_tis-spi" and the nodename needs to be "tpm@0"
rather than "cr50@0":

  tpm@1: compatible: ['tcg,tpm_tis-spi'] is too short
        from schema $id: http://devicetree.org/schemas/tpm/tcg,tpm_tis-spi.yaml#

  cr50@0: $nodename:0: 'cr50@0' does not match '^tpm(@[0-9a-f]+)?$'
        from schema $id: http://devicetree.org/schemas/tpm/google,cr50.yaml#

Fix these schema violations.

phyGATE-Tauri uses an Infineon SLB9670:
https://lore.kernel.org/all/ab45c82485fa272f74adf560cbb58ee60cc42689.camel@phytec.de/

Gateworks Venice uses an Atmel ATTPM20P:
https://trac.gateworks.com/wiki/tpmSigned-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l.dts

@@ -120,7 +120,7 @@ can0: can@0 {
 	};
 
 	tpm: tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-parent = <&gpio2>;
 		pinctrl-names = "default";

arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi

@@ -89,7 +89,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi

@@ -109,7 +109,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts

@@ -234,7 +234,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm: tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tpm>;

arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi

@@ -103,7 +103,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi

@@ -115,7 +115,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm@1 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x1>;
 		spi-max-frequency = <36000000>;
 	};

arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts

@@ -196,7 +196,7 @@ &ecspi1 {
 	status = "okay";
 
 	tpm@0 {
-		compatible = "tcg,tpm_tis-spi";
+		compatible = "atmel,attpm20p", "tcg,tpm_tis-spi";
 		reg = <0x0>;
 		spi-max-frequency = <36000000>;
 	};

arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

@@ -65,7 +65,7 @@ &ecspi2 {
 	status = "okay";
 
 	tpm@0 {
-		compatible = "infineon,slb9670";
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <43000000>;
 	};

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

@@ -888,7 +888,7 @@ &spi0 {
 	status = "okay";
 	cs-gpios = <&pio 86 GPIO_ACTIVE_LOW>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		spi-max-frequency = <1000000>;

arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi

@@ -1402,7 +1402,7 @@ &spi5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi5_pins>;
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupts-extended = <&pio 171 IRQ_TYPE_EDGE_RISING>;

arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts

@@ -70,7 +70,7 @@ &cpu_alert1 {
 &spi0 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi

@@ -706,7 +706,7 @@ &sound {
 &spi2 {
 	status = "okay";
 
-	cr50@0 {
+	tpm@0 {
 		compatible = "google,cr50";
 		reg = <0>;
 		interrupt-parent = <&gpio1>;