Commit 5f2fb52f authored by Masahiro Yamada's avatar Masahiro Yamada

kbuild: rename hostprogs-y/always to hostprogs/always-y

In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.

It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.

This commit renames like follows:

  always       ->  always-y
  hostprogs-y  ->  hostprogs

So, scripts/Makefile will look like this:

  always-$(CONFIG_BUILD_BIN2C) += ...
  always-$(CONFIG_KALLSYMS)    += ...
      ...
  hostprogs := $(always-y) $(always-m)

I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.

The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: default avatarMasahiro Yamada <masahiroy@kernel.org>
parent faa7bdd7
...@@ -28,7 +28,6 @@ This document describes the Linux kernel Makefiles. ...@@ -28,7 +28,6 @@ This document describes the Linux kernel Makefiles.
--- 4.3 Using C++ for host programs --- 4.3 Using C++ for host programs
--- 4.4 Controlling compiler options for host programs --- 4.4 Controlling compiler options for host programs
--- 4.5 When host programs are actually built --- 4.5 When host programs are actually built
--- 4.6 Using hostprogs-$(CONFIG_FOO)
=== 5 Kbuild clean infrastructure === 5 Kbuild clean infrastructure
...@@ -595,11 +594,11 @@ compilation stage. ...@@ -595,11 +594,11 @@ compilation stage.
Two steps are required in order to use a host executable. Two steps are required in order to use a host executable.
The first step is to tell kbuild that a host program exists. This is The first step is to tell kbuild that a host program exists. This is
done utilising the variable hostprogs-y. done utilising the variable "hostprogs".
The second step is to add an explicit dependency to the executable. The second step is to add an explicit dependency to the executable.
This can be done in two ways. Either add the dependency in a rule, This can be done in two ways. Either add the dependency in a rule,
or utilise the variable $(always). or utilise the variable "always-y".
Both possibilities are described in the following. Both possibilities are described in the following.
4.1 Simple Host Program 4.1 Simple Host Program
...@@ -612,7 +611,7 @@ Both possibilities are described in the following. ...@@ -612,7 +611,7 @@ Both possibilities are described in the following.
Example:: Example::
hostprogs-y := bin2hex hostprogs := bin2hex
Kbuild assumes in the above example that bin2hex is made from a single Kbuild assumes in the above example that bin2hex is made from a single
c-source file named bin2hex.c located in the same directory as c-source file named bin2hex.c located in the same directory as
...@@ -630,7 +629,7 @@ Both possibilities are described in the following. ...@@ -630,7 +629,7 @@ Both possibilities are described in the following.
Example:: Example::
#scripts/lxdialog/Makefile #scripts/lxdialog/Makefile
hostprogs-y := lxdialog hostprogs := lxdialog
lxdialog-objs := checklist.o lxdialog.o lxdialog-objs := checklist.o lxdialog.o
Objects with extension .o are compiled from the corresponding .c Objects with extension .o are compiled from the corresponding .c
...@@ -650,7 +649,7 @@ Both possibilities are described in the following. ...@@ -650,7 +649,7 @@ Both possibilities are described in the following.
Example:: Example::
#scripts/kconfig/Makefile #scripts/kconfig/Makefile
hostprogs-y := qconf hostprogs := qconf
qconf-cxxobjs := qconf.o qconf-cxxobjs := qconf.o
In the example above the executable is composed of the C++ file In the example above the executable is composed of the C++ file
...@@ -662,7 +661,7 @@ Both possibilities are described in the following. ...@@ -662,7 +661,7 @@ Both possibilities are described in the following.
Example:: Example::
#scripts/kconfig/Makefile #scripts/kconfig/Makefile
hostprogs-y := qconf hostprogs := qconf
qconf-cxxobjs := qconf.o qconf-cxxobjs := qconf.o
qconf-objs := check.o qconf-objs := check.o
...@@ -710,7 +709,7 @@ Both possibilities are described in the following. ...@@ -710,7 +709,7 @@ Both possibilities are described in the following.
Example:: Example::
#drivers/pci/Makefile #drivers/pci/Makefile
hostprogs-y := gen-devlist hostprogs := gen-devlist
$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist $(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
( cd $(obj); ./gen-devlist ) < $< ( cd $(obj); ./gen-devlist ) < $<
...@@ -718,47 +717,31 @@ Both possibilities are described in the following. ...@@ -718,47 +717,31 @@ Both possibilities are described in the following.
$(obj)/gen-devlist is updated. Note that references to $(obj)/gen-devlist is updated. Note that references to
the host programs in special rules must be prefixed with $(obj). the host programs in special rules must be prefixed with $(obj).
(2) Use $(always) (2) Use always-y
When there is no suitable special rule, and the host program When there is no suitable special rule, and the host program
shall be built when a makefile is entered, the $(always) shall be built when a makefile is entered, the always-y
variable shall be used. variable shall be used.
Example:: Example::
#scripts/lxdialog/Makefile #scripts/lxdialog/Makefile
hostprogs-y := lxdialog hostprogs := lxdialog
always := $(hostprogs-y) always-y := $(hostprogs)
This will tell kbuild to build lxdialog even if not referenced in This will tell kbuild to build lxdialog even if not referenced in
any rule. any rule.
4.6 Using hostprogs-$(CONFIG_FOO)
---------------------------------
A typical pattern in a Kbuild file looks like this:
Example::
#scripts/Makefile
hostprogs-$(CONFIG_KALLSYMS) += kallsyms
Kbuild knows about both 'y' for built-in and 'm' for module.
So if a config symbol evaluates to 'm', kbuild will still build
the binary. In other words, Kbuild handles hostprogs-m exactly
like hostprogs-y. But only hostprogs-y is recommended to be used
when no CONFIG symbols are involved.
5 Kbuild clean infrastructure 5 Kbuild clean infrastructure
============================= =============================
"make clean" deletes most generated files in the obj tree where the kernel "make clean" deletes most generated files in the obj tree where the kernel
is compiled. This includes generated files such as host programs. is compiled. This includes generated files such as host programs.
Kbuild knows targets listed in $(hostprogs-y), $(hostprogs-m), $(always), Kbuild knows targets listed in $(hostprogs), $(always-y), $(always-m),
$(extra-y) and $(targets). They are all deleted during "make clean". $(always-), $(extra-y), $(extra-) and $(targets). They are all deleted
Files matching the patterns "*.[oas]", "*.ko", plus some additional files during "make clean". Files matching the patterns "*.[oas]", "*.ko", plus
generated by kbuild are deleted all over the kernel src tree when some additional files generated by kbuild are deleted all over the kernel
"make clean" is executed. source tree when "make clean" is executed.
Additional files or directories can be specified in kbuild makefiles by use of Additional files or directories can be specified in kbuild makefiles by use of
$(clean-files). $(clean-files).
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
bounds-file := include/generated/bounds.h bounds-file := include/generated/bounds.h
always := $(bounds-file) always-y := $(bounds-file)
targets := kernel/bounds.s targets := kernel/bounds.s
$(bounds-file): kernel/bounds.s FORCE $(bounds-file): kernel/bounds.s FORCE
...@@ -28,7 +28,7 @@ $(timeconst-file): kernel/time/timeconst.bc FORCE ...@@ -28,7 +28,7 @@ $(timeconst-file): kernel/time/timeconst.bc FORCE
offsets-file := include/generated/asm-offsets.h offsets-file := include/generated/asm-offsets.h
always += $(offsets-file) always-y += $(offsets-file)
targets += arch/$(SRCARCH)/kernel/asm-offsets.s targets += arch/$(SRCARCH)/kernel/asm-offsets.s
arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file) arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file)
...@@ -39,7 +39,7 @@ $(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE ...@@ -39,7 +39,7 @@ $(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
##### #####
# Check for missing system calls # Check for missing system calls
always += missing-syscalls always-y += missing-syscalls
quiet_cmd_syscalls = CALL $< quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags) cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
...@@ -50,7 +50,7 @@ missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE ...@@ -50,7 +50,7 @@ missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
##### #####
# Check atomic headers are up-to-date # Check atomic headers are up-to-date
always += old-atomics always-y += old-atomics
quiet_cmd_atomics = CALL $< quiet_cmd_atomics = CALL $<
cmd_atomics = $(CONFIG_SHELL) $< cmd_atomics = $(CONFIG_SHELL) $<
......
...@@ -8,7 +8,7 @@ ...@@ -8,7 +8,7 @@
# Copyright (C) 1994 by Linus Torvalds # Copyright (C) 1994 by Linus Torvalds
# #
hostprogs-y := tools/mkbb tools/objstrip hostprogs := tools/mkbb tools/objstrip
targets := vmlinux.gz vmlinux \ targets := vmlinux.gz vmlinux \
vmlinux.nh tools/lxboot tools/bootlx tools/bootph \ vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
tools/bootpzh bootloader bootpheader bootpzheader tools/bootpzh bootloader bootpheader bootpzheader
......
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32 ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
include $(srctree)/lib/vdso/Makefile include $(srctree)/lib/vdso/Makefile
hostprogs-y := vdsomunge hostprogs := vdsomunge
obj-vdso := vgettimeofday.o datapage.o note.o obj-vdso := vgettimeofday.o datapage.o note.o
......
...@@ -115,9 +115,9 @@ VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd) ...@@ -115,9 +115,9 @@ VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd)
# Borrow vdsomunge.c from the arm vDSO # Borrow vdsomunge.c from the arm vDSO
# We have to use a relative path because scripts/Makefile.host prefixes # We have to use a relative path because scripts/Makefile.host prefixes
# $(hostprogs-y) with $(obj) # $(hostprogs) with $(obj)
munge := ../../../arm/vdso/vdsomunge munge := ../../../arm/vdso/vdsomunge
hostprogs-y := $(munge) hostprogs := $(munge)
c-obj-vdso := note.o c-obj-vdso := note.o
c-obj-vdso-gettimeofday := vgettimeofday.o c-obj-vdso-gettimeofday := vgettimeofday.o
......
...@@ -21,7 +21,7 @@ endif ...@@ -21,7 +21,7 @@ endif
drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
strip-flags := $(addprefix --remove-section=,$(drop-sections)) strip-flags := $(addprefix --remove-section=,$(drop-sections))
hostprogs-y := elf2ecoff hostprogs := elf2ecoff
suffix-y := bin suffix-y := bin
suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_BZIP2) := bz2
......
...@@ -84,7 +84,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE ...@@ -84,7 +84,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE) HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
# Calculate the load address of the compressed kernel image # Calculate the load address of the compressed kernel image
hostprogs-y := calc_vmlinuz_load_addr hostprogs := calc_vmlinuz_load_addr
ifneq ($(zload-y),) ifneq ($(zload-y),)
VMLINUZ_LOAD_ADDRESS := $(zload-y) VMLINUZ_LOAD_ADDRESS := $(zload-y)
...@@ -112,7 +112,7 @@ ifdef CONFIG_MACH_DECSTATION ...@@ -112,7 +112,7 @@ ifdef CONFIG_MACH_DECSTATION
endif endif
# elf2ecoff can only handle 32bit image # elf2ecoff can only handle 32bit image
hostprogs-y += ../elf2ecoff hostprogs += ../elf2ecoff
ifdef CONFIG_32BIT ifdef CONFIG_32BIT
VMLINUZ = vmlinuz VMLINUZ = vmlinuz
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y += relocs hostprogs += relocs
relocs-objs += relocs_32.o relocs-objs += relocs_32.o
relocs-objs += relocs_64.o relocs-objs += relocs_64.o
relocs-objs += relocs_main.o relocs-objs += relocs_main.o
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y := elf-entry hostprogs := elf-entry
PHONY += elf-entry PHONY += elf-entry
elf-entry: $(obj)/elf-entry elf-entry: $(obj)/elf-entry
@: @:
hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check hostprogs += loongson3-llsc-check
PHONY += loongson3-llsc-check PHONY += loongson3-llsc-check
loongson3-llsc-check: $(obj)/loongson3-llsc-check loongson3-llsc-check: $(obj)/loongson3-llsc-check
@: @:
...@@ -100,7 +100,7 @@ $(obj)/%.so.raw: OBJCOPYFLAGS := -S ...@@ -100,7 +100,7 @@ $(obj)/%.so.raw: OBJCOPYFLAGS := -S
$(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE $(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE
$(call if_changed,objcopy) $(call if_changed,objcopy)
hostprogs-y := genvdso hostprogs := genvdso
quiet_cmd_genvdso = GENVDSO $@ quiet_cmd_genvdso = GENVDSO $@
define cmd_genvdso define cmd_genvdso
......
...@@ -224,7 +224,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE ...@@ -224,7 +224,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
$(obj)/wrapper.a: $(obj-wlib) FORCE $(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar) $(call if_changed,bootar)
hostprogs-y := addnote hack-coff mktree hostprogs := addnote hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
...@@ -464,7 +464,7 @@ WRAPPER_BINDIR := /usr/sbin ...@@ -464,7 +464,7 @@ WRAPPER_BINDIR := /usr/sbin
INSTALL := install INSTALL := install
extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
......
...@@ -10,8 +10,8 @@ PHONY += kapi ...@@ -10,8 +10,8 @@ PHONY += kapi
kapi: $(kapi-hdrs-y) kapi: $(kapi-hdrs-y)
hostprogs-y += gen_facilities hostprogs += gen_facilities
hostprogs-y += gen_opcode_table hostprogs += gen_opcode_table
HOSTCFLAGS_gen_facilities.o += $(LINUXINCLUDE) HOSTCFLAGS_gen_facilities.o += $(LINUXINCLUDE)
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
ROOT_IMG := /usr/src/root.img ROOT_IMG := /usr/src/root.img
ELFTOAOUT := elftoaout ELFTOAOUT := elftoaout
hostprogs-y := piggyback hostprogs := piggyback
targets := tftpboot.img image zImage vmlinux.aout targets := tftpboot.img image zImage vmlinux.aout
clean-files := System.map clean-files := System.map
......
...@@ -41,7 +41,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE ...@@ -41,7 +41,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso) $(call if_changed,vdso)
HOST_EXTRACFLAGS += -I$(srctree)/tools/include HOST_EXTRACFLAGS += -I$(srctree)/tools/include
hostprogs-y += vdso2c hostprogs += vdso2c
quiet_cmd_vdso2c = VDSO2C $@ quiet_cmd_vdso2c = VDSO2C $@
cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@ cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
......
...@@ -45,8 +45,8 @@ setup-y += video-vesa.o ...@@ -45,8 +45,8 @@ setup-y += video-vesa.o
setup-y += video-bios.o setup-y += video-bios.o
targets += $(setup-y) targets += $(setup-y)
hostprogs-y := tools/build hostprogs := tools/build
hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr hostprogs += mkcpustr
HOST_EXTRACFLAGS += -I$(srctree)/tools/include \ HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
-include include/generated/autoconf.h \ -include include/generated/autoconf.h \
......
...@@ -58,7 +58,7 @@ KBUILD_LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \ ...@@ -58,7 +58,7 @@ KBUILD_LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \
endif endif
LDFLAGS_vmlinux := -T LDFLAGS_vmlinux := -T
hostprogs-y := mkpiggy hostprogs := mkpiggy
HOST_EXTRACFLAGS += -I$(srctree)/tools/include HOST_EXTRACFLAGS += -I$(srctree)/tools/include
sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p' sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'
......
...@@ -59,7 +59,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE ...@@ -59,7 +59,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso_and_check) $(call if_changed,vdso_and_check)
HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/$(SUBARCH)/include/uapi HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/$(SUBARCH)/include/uapi
hostprogs-y += vdso2c hostprogs += vdso2c
quiet_cmd_vdso2c = VDSO2C $@ quiet_cmd_vdso2c = VDSO2C $@
cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@ cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@
......
...@@ -12,7 +12,7 @@ OBJECT_FILES_NON_STANDARD := y ...@@ -12,7 +12,7 @@ OBJECT_FILES_NON_STANDARD := y
# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
KCOV_INSTRUMENT := n KCOV_INSTRUMENT := n
always := realmode.bin realmode.relocs always-y := realmode.bin realmode.relocs
wakeup-objs := wakeup_asm.o wakemain.o video-mode.o wakeup-objs := wakeup_asm.o wakemain.o video-mode.o
wakeup-objs += copy.o bioscall.o regs.o wakeup-objs += copy.o bioscall.o regs.o
......
...@@ -26,7 +26,7 @@ posttest: $(obj)/insn_decoder_test vmlinux $(obj)/insn_sanity ...@@ -26,7 +26,7 @@ posttest: $(obj)/insn_decoder_test vmlinux $(obj)/insn_sanity
$(call cmd,posttest) $(call cmd,posttest)
$(call cmd,sanitytest) $(call cmd,sanitytest)
hostprogs-y += insn_decoder_test insn_sanity hostprogs += insn_decoder_test insn_sanity
# -I needed for generated C source and C source which in the kernel tree. # -I needed for generated C source and C source which in the kernel tree.
HOSTCFLAGS_insn_decoder_test.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/ HOSTCFLAGS_insn_decoder_test.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/
...@@ -39,7 +39,7 @@ $(obj)/insn_decoder_test.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/l ...@@ -39,7 +39,7 @@ $(obj)/insn_decoder_test.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/l
$(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
HOST_EXTRACFLAGS += -I$(srctree)/tools/include HOST_EXTRACFLAGS += -I$(srctree)/tools/include
hostprogs-y += relocs hostprogs += relocs
relocs-objs := relocs_32.o relocs_64.o relocs_common.o relocs-objs := relocs_32.o relocs_64.o relocs_common.o
PHONY += relocs PHONY += relocs
relocs: $(obj)/relocs relocs: $(obj)/relocs
......
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
ccflags-y := -Idrivers/gpu/drm/amd/include ccflags-y := -Idrivers/gpu/drm/amd/include
hostprogs-y := mkregtable hostprogs := mkregtable
clean-files := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h clean-files := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h
quiet_cmd_mkregtable = MKREGTABLE $@ quiet_cmd_mkregtable = MKREGTABLE $@
......
...@@ -12,7 +12,7 @@ obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o ...@@ -12,7 +12,7 @@ obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o
# Files generated that shall be removed upon make clean # Files generated that shall be removed upon make clean
clean-files := consolemap_deftbl.c defkeymap.c clean-files := consolemap_deftbl.c defkeymap.c
hostprogs-y += conmakehash hostprogs += conmakehash
quiet_cmd_conmk = CONMK $@ quiet_cmd_conmk = CONMK $@
cmd_conmk = $(obj)/conmakehash $< > $@ cmd_conmk = $(obj)/conmakehash $< > $@
......
...@@ -18,7 +18,7 @@ obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o ...@@ -18,7 +18,7 @@ obj-$(CONFIG_SPU_BASE) += logo_spe_clut224.o
# How to generate logo's # How to generate logo's
hostprogs-y := pnmtologo hostprogs := pnmtologo
# Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..." # Create commands like "pnmtologo -t mono -n logo_mac_mono -o ..."
quiet_cmd_logo = LOGO $@ quiet_cmd_logo = LOGO $@
......
...@@ -7,7 +7,7 @@ obj-$(CONFIG_ZORRO) += zorro.o zorro-driver.o zorro-sysfs.o ...@@ -7,7 +7,7 @@ obj-$(CONFIG_ZORRO) += zorro.o zorro-driver.o zorro-sysfs.o
obj-$(CONFIG_PROC_FS) += proc.o obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_ZORRO_NAMES) += names.o obj-$(CONFIG_ZORRO_NAMES) += names.o
hostprogs-y := gen-devlist hostprogs := gen-devlist
# Files generated that shall be removed upon make clean # Files generated that shall be removed upon make clean
clean-files := devlist.h clean-files := devlist.h
......
...@@ -35,4 +35,4 @@ $(obj)/utf8data.h: $(src)/utf8data.h_shipped FORCE ...@@ -35,4 +35,4 @@ $(obj)/utf8data.h: $(src)/utf8data.h_shipped FORCE
endif endif
targets += utf8data.h targets += utf8data.h
hostprogs-y += mkutf8data hostprogs += mkutf8data
...@@ -239,8 +239,8 @@ obj-$(CONFIG_ASN1) += asn1_decoder.o ...@@ -239,8 +239,8 @@ obj-$(CONFIG_ASN1) += asn1_decoder.o
obj-$(CONFIG_FONT_SUPPORT) += fonts/ obj-$(CONFIG_FONT_SUPPORT) += fonts/
hostprogs-y := gen_crc32table hostprogs := gen_crc32table
hostprogs-y += gen_crc64table hostprogs += gen_crc64table
clean-files := crc32table.h clean-files := crc32table.h
clean-files += crc64table.h clean-files += crc64table.h
......
...@@ -10,7 +10,7 @@ raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \ ...@@ -10,7 +10,7 @@ raid6_pq-$(CONFIG_ALTIVEC) += altivec1.o altivec2.o altivec4.o altivec8.o \
raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o raid6_pq-$(CONFIG_KERNEL_MODE_NEON) += neon.o neon1.o neon2.o neon4.o neon8.o recov_neon.o recov_neon_inner.o
raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o raid6_pq-$(CONFIG_S390) += s390vx8.o recov_s390xc.o
hostprogs-y += mktables hostprogs += mktables
ifeq ($(CONFIG_ALTIVEC),y) ifeq ($(CONFIG_ALTIVEC),y)
altivec_flags := -maltivec $(call cc-option,-mabi=altivec) altivec_flags := -maltivec $(call cc-option,-mabi=altivec)
......
...@@ -3,7 +3,7 @@ ...@@ -3,7 +3,7 @@
# Makefile for the Linux BPFILTER layer. # Makefile for the Linux BPFILTER layer.
# #
hostprogs-y := bpfilter_umh hostprogs := bpfilter_umh
bpfilter_umh-objs := main.o bpfilter_umh-objs := main.o
KBUILD_HOSTCFLAGS += -I $(srctree)/tools/include/ -I $(srctree)/tools/include/uapi KBUILD_HOSTCFLAGS += -I $(srctree)/tools/include/ -I $(srctree)/tools/include/uapi
HOSTCC := $(CC) HOSTCC := $(CC)
......
...@@ -111,65 +111,65 @@ ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS) ...@@ -111,65 +111,65 @@ ibumad-objs := bpf_load.o ibumad_user.o $(TRACE_HELPERS)
hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS) hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS)
# Tell kbuild to always build the programs # Tell kbuild to always build the programs
always := $(tprogs-y) always-y := $(tprogs-y)
always += sockex1_kern.o always-y += sockex1_kern.o
always += sockex2_kern.o always-y += sockex2_kern.o
always += sockex3_kern.o always-y += sockex3_kern.o
always += tracex1_kern.o always-y += tracex1_kern.o
always += tracex2_kern.o always-y += tracex2_kern.o
always += tracex3_kern.o always-y += tracex3_kern.o
always += tracex4_kern.o always-y += tracex4_kern.o
always += tracex5_kern.o always-y += tracex5_kern.o
always += tracex6_kern.o always-y += tracex6_kern.o
always += tracex7_kern.o always-y += tracex7_kern.o
always += sock_flags_kern.o always-y += sock_flags_kern.o
always += test_probe_write_user_kern.o always-y += test_probe_write_user_kern.o
always += trace_output_kern.o always-y += trace_output_kern.o
always += tcbpf1_kern.o always-y += tcbpf1_kern.o
always += tc_l2_redirect_kern.o always-y += tc_l2_redirect_kern.o
always += lathist_kern.o always-y += lathist_kern.o
always += offwaketime_kern.o always-y += offwaketime_kern.o
always += spintest_kern.o always-y += spintest_kern.o
always += map_perf_test_kern.o always-y += map_perf_test_kern.o
always += test_overhead_tp_kern.o always-y += test_overhead_tp_kern.o
always += test_overhead_raw_tp_kern.o always-y += test_overhead_raw_tp_kern.o
always += test_overhead_kprobe_kern.o always-y += test_overhead_kprobe_kern.o
always += parse_varlen.o parse_simple.o parse_ldabs.o always-y += parse_varlen.o parse_simple.o parse_ldabs.o
always += test_cgrp2_tc_kern.o always-y += test_cgrp2_tc_kern.o
always += xdp1_kern.o always-y += xdp1_kern.o
always += xdp2_kern.o always-y += xdp2_kern.o
always += xdp_router_ipv4_kern.o always-y += xdp_router_ipv4_kern.o
always += test_current_task_under_cgroup_kern.o always-y += test_current_task_under_cgroup_kern.o
always += trace_event_kern.o always-y += trace_event_kern.o
always += sampleip_kern.o always-y += sampleip_kern.o
always += lwt_len_hist_kern.o always-y += lwt_len_hist_kern.o
always += xdp_tx_iptunnel_kern.o always-y += xdp_tx_iptunnel_kern.o
always += test_map_in_map_kern.o always-y += test_map_in_map_kern.o
always += tcp_synrto_kern.o always-y += tcp_synrto_kern.o
always += tcp_rwnd_kern.o always-y += tcp_rwnd_kern.o
always += tcp_bufs_kern.o always-y += tcp_bufs_kern.o
always += tcp_cong_kern.o always-y += tcp_cong_kern.o
always += tcp_iw_kern.o always-y += tcp_iw_kern.o
always += tcp_clamp_kern.o always-y += tcp_clamp_kern.o
always += tcp_basertt_kern.o always-y += tcp_basertt_kern.o
always += tcp_tos_reflect_kern.o always-y += tcp_tos_reflect_kern.o
always += tcp_dumpstats_kern.o always-y += tcp_dumpstats_kern.o
always += xdp_redirect_kern.o always-y += xdp_redirect_kern.o
always += xdp_redirect_map_kern.o always-y += xdp_redirect_map_kern.o
always += xdp_redirect_cpu_kern.o always-y += xdp_redirect_cpu_kern.o
always += xdp_monitor_kern.o always-y += xdp_monitor_kern.o
always += xdp_rxq_info_kern.o always-y += xdp_rxq_info_kern.o
always += xdp2skb_meta_kern.o always-y += xdp2skb_meta_kern.o
always += syscall_tp_kern.o always-y += syscall_tp_kern.o
always += cpustat_kern.o always-y += cpustat_kern.o
always += xdp_adjust_tail_kern.o always-y += xdp_adjust_tail_kern.o
always += xdp_fwd_kern.o always-y += xdp_fwd_kern.o
always += task_fd_query_kern.o always-y += task_fd_query_kern.o
always += xdp_sample_pkts_kern.o always-y += xdp_sample_pkts_kern.o
always += ibumad_kern.o always-y += ibumad_kern.o
always += hbm_out_kern.o always-y += hbm_out_kern.o
always += hbm_edt_kern.o always-y += hbm_edt_kern.o
always += xdpsock_kern.o always-y += xdpsock_kern.o
ifeq ($(ARCH), arm) ifeq ($(ARCH), arm)
# Strip all except -D__LINUX_ARM_ARCH__ option needed to handle linux # Strip all except -D__LINUX_ARM_ARCH__ option needed to handle linux
......
...@@ -2,12 +2,8 @@ ...@@ -2,12 +2,8 @@
obj-$(CONFIG_SAMPLE_CONNECTOR) += cn_test.o obj-$(CONFIG_SAMPLE_CONNECTOR) += cn_test.o
# List of programs to build # List of programs to build
ifdef CONFIG_SAMPLE_CONNECTOR hostprogs := ucon
hostprogs-y := ucon always-y := $(hostprogs)
endif
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include HOSTCFLAGS_ucon.o += -I$(objtree)/usr/include
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# List of programs to build # List of programs to build
hostprogs-y := hid-example hostprogs := hid-example
always-y := $(hostprogs)
# Tell kbuild to always build the programs
always := $(hostprogs-y)
HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include HOSTCFLAGS_hid-example.o += -I$(objtree)/usr/include
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# Copyright (c) 2012-2019, Intel Corporation. All rights reserved. # Copyright (c) 2012-2019, Intel Corporation. All rights reserved.
hostprogs-y := mei-amt-version hostprogs := mei-amt-version
HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include HOSTCFLAGS_mei-amt-version.o += -I$(objtree)/usr/include
always := $(hostprogs-y) always-y := $(hostprogs)
all: mei-amt-version all: mei-amt-version
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y := pidfd-metadata hostprogs := pidfd-metadata
always := $(hostprogs-y) always-y := $(hostprogs)
HOSTCFLAGS_pidfd-metadata.o += -I$(objtree)/usr/include HOSTCFLAGS_pidfd-metadata.o += -I$(objtree)/usr/include
all: pidfd-metadata all: pidfd-metadata
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
ifndef CROSS_COMPILE ifndef CROSS_COMPILE
hostprogs-y := bpf-fancy dropper bpf-direct user-trap hostprogs := bpf-fancy dropper bpf-direct user-trap
HOSTCFLAGS_bpf-fancy.o += -I$(objtree)/usr/include HOSTCFLAGS_bpf-fancy.o += -I$(objtree)/usr/include
HOSTCFLAGS_bpf-fancy.o += -idirafter $(objtree)/include HOSTCFLAGS_bpf-fancy.o += -idirafter $(objtree)/include
...@@ -40,5 +40,5 @@ HOSTLDLIBS_bpf-fancy += $(MFLAG) ...@@ -40,5 +40,5 @@ HOSTLDLIBS_bpf-fancy += $(MFLAG)
HOSTLDLIBS_dropper += $(MFLAG) HOSTLDLIBS_dropper += $(MFLAG)
HOSTLDLIBS_user-trap += $(MFLAG) HOSTLDLIBS_user-trap += $(MFLAG)
endif endif
always := $(hostprogs-y) always-y := $(hostprogs)
endif endif
# SPDX-License-Identifier: GPL-2.0-only # SPDX-License-Identifier: GPL-2.0-only
# List of programs to build # List of programs to build
hostprogs-y := uhid-example hostprogs := uhid-example
# Tell kbuild to always build the programs # Tell kbuild to always build the programs
always := $(hostprogs-y) always-y := $(hostprogs)
HOSTCFLAGS_uhid-example.o += -I$(objtree)/usr/include HOSTCFLAGS_uhid-example.o += -I$(objtree)/usr/include
# SPDX-License-Identifier: GPL-2.0-only # SPDX-License-Identifier: GPL-2.0-only
# List of programs to build # List of programs to build
hostprogs-y := \ hostprogs := \
test-fsmount \ test-fsmount \
test-statx test-statx
# Tell kbuild to always build the programs always-y := $(hostprogs)
always := $(hostprogs-y)
HOSTCFLAGS_test-fsmount.o += -I$(objtree)/usr/include HOSTCFLAGS_test-fsmount.o += -I$(objtree)/usr/include
HOSTCFLAGS_test-statx.o += -I$(objtree)/usr/include HOSTCFLAGS_test-statx.o += -I$(objtree)/usr/include
...@@ -7,14 +7,14 @@ ...@@ -7,14 +7,14 @@
HOST_EXTRACFLAGS += -I$(srctree)/tools/include HOST_EXTRACFLAGS += -I$(srctree)/tools/include
hostprogs-$(CONFIG_BUILD_BIN2C) += bin2c always-$(CONFIG_BUILD_BIN2C) += bin2c
hostprogs-$(CONFIG_KALLSYMS) += kallsyms always-$(CONFIG_KALLSYMS) += kallsyms
hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount always-$(BUILD_C_RECORDMCOUNT) += recordmcount
hostprogs-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable always-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable
hostprogs-$(CONFIG_ASN1) += asn1_compiler always-$(CONFIG_ASN1) += asn1_compiler
hostprogs-$(CONFIG_MODULE_SIG_FORMAT) += sign-file always-$(CONFIG_MODULE_SIG_FORMAT) += sign-file
hostprogs-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert always-$(CONFIG_SYSTEM_TRUSTED_KEYRING) += extract-cert
hostprogs-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert always-$(CONFIG_SYSTEM_EXTRA_CERTIFICATE) += insert-sys-cert
HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include HOSTCFLAGS_sorttable.o = -I$(srctree)/tools/include
HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
...@@ -30,10 +30,10 @@ HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED ...@@ -30,10 +30,10 @@ HOSTCFLAGS_sorttable.o += -DUNWINDER_ORC_ENABLED
HOSTLDLIBS_sorttable = -lpthread HOSTLDLIBS_sorttable = -lpthread
endif endif
always := $(hostprogs-y) $(hostprogs-m) hostprogs := $(always-y) $(always-m)
# The following hostprogs-y programs are only build on demand # The following programs are only built on demand
hostprogs-y += unifdef hostprogs += unifdef
subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins subdir-$(CONFIG_GCC_PLUGINS) += gcc-plugins
subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-$(CONFIG_MODVERSIONS) += genksyms
......
...@@ -16,6 +16,8 @@ obj-m := ...@@ -16,6 +16,8 @@ obj-m :=
lib-y := lib-y :=
lib-m := lib-m :=
always := always :=
always-y :=
always-m :=
targets := targets :=
subdir-y := subdir-y :=
subdir-m := subdir-m :=
...@@ -44,7 +46,7 @@ include $(kbuild-file) ...@@ -44,7 +46,7 @@ include $(kbuild-file)
include scripts/Makefile.lib include scripts/Makefile.lib
# Do not include host rules unless needed # Do not include host rules unless needed
ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),) ifneq ($(hostprogs)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
include scripts/Makefile.host include scripts/Makefile.host
endif endif
...@@ -348,7 +350,7 @@ $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE ...@@ -348,7 +350,7 @@ $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
$(call if_changed_rule,as_o_S) $(call if_changed_rule,as_o_S)
targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y) targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
targets += $(extra-y) $(MAKECMDGOALS) $(always) targets += $(extra-y) $(always-y) $(MAKECMDGOALS)
# Linker scripts preprocessor (.lds.S -> .lds) # Linker scripts preprocessor (.lds.S -> .lds)
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------
...@@ -490,7 +492,7 @@ else ...@@ -490,7 +492,7 @@ else
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \ __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
$(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \ $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
$(subdir-ym) $(always) $(subdir-ym) $(always-y)
@: @:
endif endif
......
...@@ -28,8 +28,8 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn)) ...@@ -28,8 +28,8 @@ subdir-ymn := $(addprefix $(obj)/,$(subdir-ymn))
# directory # directory
__clean-files := $(extra-y) $(extra-m) $(extra-) \ __clean-files := $(extra-y) $(extra-m) $(extra-) \
$(always) $(targets) $(clean-files) \ $(always) $(always-y) $(always-m) $(always-) $(targets) $(clean-files) \
$(hostprogs-y) $(hostprogs-m) $(hostprogs-) \ $(hostprogs) $(hostprogs-y) $(hostprogs-m) $(hostprogs-) \
$(hostlibs-y) $(hostlibs-m) $(hostlibs-) \ $(hostlibs-y) $(hostlibs-m) $(hostlibs-) \
$(hostcxxlibs-y) $(hostcxxlibs-m) $(hostcxxlibs-y) $(hostcxxlibs-m)
......
...@@ -24,21 +24,21 @@ $(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE ...@@ -24,21 +24,21 @@ $(obj)/%.tab.c $(obj)/%.tab.h: $(src)/%.y FORCE
# Both C and C++ are supported, but preferred language is C for such utilities. # Both C and C++ are supported, but preferred language is C for such utilities.
# #
# Sample syntax (see Documentation/kbuild/makefiles.rst for reference) # Sample syntax (see Documentation/kbuild/makefiles.rst for reference)
# hostprogs-y := bin2hex # hostprogs := bin2hex
# Will compile bin2hex.c and create an executable named bin2hex # Will compile bin2hex.c and create an executable named bin2hex
# #
# hostprogs-y := lxdialog # hostprogs := lxdialog
# lxdialog-objs := checklist.o lxdialog.o # lxdialog-objs := checklist.o lxdialog.o
# Will compile lxdialog.c and checklist.c, and then link the executable # Will compile lxdialog.c and checklist.c, and then link the executable
# lxdialog, based on checklist.o and lxdialog.o # lxdialog, based on checklist.o and lxdialog.o
# #
# hostprogs-y := qconf # hostprogs := qconf
# qconf-cxxobjs := qconf.o # qconf-cxxobjs := qconf.o
# qconf-objs := menu.o # qconf-objs := menu.o
# Will compile qconf as a C++ program, and menu as a C program. # Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf # They are linked as C++ code to the executable qconf
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m)) __hostprogs := $(sort $(hostprogs))
host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m)) host-cshlib := $(sort $(hostlibs-y) $(hostlibs-m))
host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m)) host-cxxshlib := $(sort $(hostcxxlibs-y) $(hostcxxlibs-m))
......
...@@ -4,6 +4,8 @@ asflags-y += $(EXTRA_AFLAGS) ...@@ -4,6 +4,8 @@ asflags-y += $(EXTRA_AFLAGS)
ccflags-y += $(EXTRA_CFLAGS) ccflags-y += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS) cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS) ldflags-y += $(EXTRA_LDFLAGS)
always-y += $(always)
hostprogs += $(hostprogs-y) $(hostprogs-m)
# flags that take effect in current and sub directories # flags that take effect in current and sub directories
KBUILD_AFLAGS += $(subdir-asflags-y) KBUILD_AFLAGS += $(subdir-asflags-y)
...@@ -59,6 +61,8 @@ subdir-obj-y := $(filter %/built-in.a, $(obj-y)) ...@@ -59,6 +61,8 @@ subdir-obj-y := $(filter %/built-in.a, $(obj-y))
real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) real-obj-y := $(foreach m, $(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m))) real-obj-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)) $($(m:.o=-))),$($(m:.o=-objs)) $($(m:.o=-y)) $($(m:.o=-m)),$(m)))
always-y += $(always-m)
# DTB # DTB
# If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built # If CONFIG_OF_ALL_DTBS is enabled, all DT blobs are built
extra-y += $(dtb-y) extra-y += $(dtb-y)
...@@ -72,7 +76,7 @@ endif ...@@ -72,7 +76,7 @@ endif
# Add subdir path # Add subdir path
extra-y := $(addprefix $(obj)/,$(extra-y)) extra-y := $(addprefix $(obj)/,$(extra-y))
always := $(addprefix $(obj)/,$(always)) always-y := $(addprefix $(obj)/,$(always-y))
targets := $(addprefix $(obj)/,$(targets)) targets := $(addprefix $(obj)/,$(targets))
modorder := $(addprefix $(obj)/,$(modorder)) modorder := $(addprefix $(obj)/,$(modorder))
obj-m := $(addprefix $(obj)/,$(obj-m)) obj-m := $(addprefix $(obj)/,$(obj-m))
......
...@@ -2,5 +2,5 @@ ...@@ -2,5 +2,5 @@
# #
# fixdep: used to generate dependency information during build process # fixdep: used to generate dependency information during build process
hostprogs-y := fixdep hostprogs := fixdep
always := $(hostprogs-y) always-y := $(hostprogs)
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
# scripts/dtc makefile # scripts/dtc makefile
hostprogs-$(CONFIG_DTC) := dtc hostprogs := dtc
always := $(hostprogs-y) always-$(CONFIG_DTC) := $(hostprogs)
dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \ dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
srcpos.o checks.o util.o srcpos.o checks.o util.o
......
...@@ -23,7 +23,7 @@ $(objtree)/$(obj)/randomize_layout_seed.h: FORCE ...@@ -23,7 +23,7 @@ $(objtree)/$(obj)/randomize_layout_seed.h: FORCE
targets = randomize_layout_seed.h randomize_layout_hash.h targets = randomize_layout_seed.h randomize_layout_hash.h
$(HOSTLIBS)-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p))) $(HOSTLIBS)-y := $(foreach p,$(GCC_PLUGIN),$(if $(findstring /,$(p)),,$(p)))
always := $($(HOSTLIBS)-y) always-y := $($(HOSTLIBS)-y)
$(foreach p,$($(HOSTLIBS)-y:%.so=%),$(eval $(p)-objs := $(p).o)) $(foreach p,$($(HOSTLIBS)-y:%.so=%),$(eval $(p)-objs := $(p).o))
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y := genksyms hostprogs := genksyms
always := $(hostprogs-y) always-y := $(hostprogs)
genksyms-objs := genksyms.o parse.tab.o lex.lex.o genksyms-objs := genksyms.o parse.tab.o lex.lex.o
......
...@@ -157,11 +157,11 @@ HOSTCFLAGS_lexer.lex.o := -I $(srctree)/$(src) ...@@ -157,11 +157,11 @@ HOSTCFLAGS_lexer.lex.o := -I $(srctree)/$(src)
HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src) HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src)
# conf: Used for defconfig, oldconfig and related targets # conf: Used for defconfig, oldconfig and related targets
hostprogs-y += conf hostprogs += conf
conf-objs := conf.o $(common-objs) conf-objs := conf.o $(common-objs)
# nconf: Used for the nconfig target based on ncurses # nconf: Used for the nconfig target based on ncurses
hostprogs-y += nconf hostprogs += nconf
nconf-objs := nconf.o nconf.gui.o $(common-objs) nconf-objs := nconf.o nconf.gui.o $(common-objs)
HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs) HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs)
...@@ -171,7 +171,7 @@ HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags) ...@@ -171,7 +171,7 @@ HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags)
$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg $(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg
# mconf: Used for the menuconfig target based on lxdialog # mconf: Used for the menuconfig target based on lxdialog
hostprogs-y += mconf hostprogs += mconf
lxdialog := $(addprefix lxdialog/, \ lxdialog := $(addprefix lxdialog/, \
checklist.o inputbox.o menubox.o textbox.o util.o yesno.o) checklist.o inputbox.o menubox.o textbox.o util.o yesno.o)
mconf-objs := mconf.o $(lxdialog) $(common-objs) mconf-objs := mconf.o $(lxdialog) $(common-objs)
...@@ -183,7 +183,7 @@ $(foreach f, mconf.o $(lxdialog), \ ...@@ -183,7 +183,7 @@ $(foreach f, mconf.o $(lxdialog), \
$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg $(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg
# qconf: Used for the xconfig target based on Qt # qconf: Used for the xconfig target based on Qt
hostprogs-y += qconf hostprogs += qconf
qconf-cxxobjs := qconf.o qconf-cxxobjs := qconf.o
qconf-objs := images.o $(common-objs) qconf-objs := images.o $(common-objs)
...@@ -199,7 +199,7 @@ $(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg ...@@ -199,7 +199,7 @@ $(obj)/%.moc: $(src)/%.h $(obj)/qconf-cfg
$(call cmd,moc) $(call cmd,moc)
# gconf: Used for the gconfig target based on GTK+ # gconf: Used for the gconfig target based on GTK+
hostprogs-y += gconf hostprogs += gconf
gconf-objs := gconf.o images.o $(common-objs) gconf-objs := gconf.o images.o $(common-objs)
HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs) HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs)
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
OBJECT_FILES_NON_STANDARD := y OBJECT_FILES_NON_STANDARD := y
hostprogs-y := modpost mk_elfconfig hostprogs := modpost mk_elfconfig
always := $(hostprogs-y) empty.o always-y := $(hostprogs) empty.o
modpost-objs := modpost.o file2alias.o sumversion.o modpost-objs := modpost.o file2alias.o sumversion.o
......
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y := genheaders hostprogs := genheaders
HOST_EXTRACFLAGS += \ HOST_EXTRACFLAGS += \
-I$(srctree)/include/uapi -I$(srctree)/include \ -I$(srctree)/include/uapi -I$(srctree)/include \
-I$(srctree)/security/selinux/include -I$(srctree)/security/selinux/include
always := $(hostprogs-y) always-y := $(hostprogs)
# SPDX-License-Identifier: GPL-2.0 # SPDX-License-Identifier: GPL-2.0
hostprogs-y := mdp hostprogs := mdp
HOST_EXTRACFLAGS += \ HOST_EXTRACFLAGS += \
-I$(srctree)/include/uapi -I$(srctree)/include \ -I$(srctree)/include/uapi -I$(srctree)/include \
-I$(srctree)/security/selinux/include -I$(objtree)/include -I$(srctree)/security/selinux/include -I$(objtree)/include
always := $(hostprogs-y) always-y := $(hostprogs)
clean-files := policy.* file_contexts clean-files := policy.* file_contexts
...@@ -52,7 +52,7 @@ ifeq ($(cpio-data),) ...@@ -52,7 +52,7 @@ ifeq ($(cpio-data),)
cpio-data := $(obj)/initramfs_data.cpio cpio-data := $(obj)/initramfs_data.cpio
hostprogs-y := gen_init_cpio hostprogs := gen_init_cpio
# .initramfs_data.cpio.d is used to identify all files included # .initramfs_data.cpio.d is used to identify all files included
# in initramfs and to detect if any files are added/removed. # in initramfs and to detect if any files are added/removed.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment