pata_efar: fix PIO2 underclocking

Fix the PIO mode 2 using mode 0 timings -- this driver should enable the
fast timing bank starting with PIO2, just like the PIIX/ICH drivers do.
Also, fix/rephrase some comments while at it.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/ata/pata_efar.c

@@ -22,7 +22,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.4"
+#define DRV_VERSION	"0.4.5"
 
 /**
  *	efar_pre_reset	-	Enable bits
@@ -98,18 +98,17 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 			    { 2, 1 },
 			    { 2, 3 }, };
 
-	if (pio > 2)
-		control |= 1;	/* TIME1 enable */
+	if (pio > 1)
+		control |= 1;	/* TIME */
 	if (ata_pio_need_iordy(adev))	/* PIO 3/4 require IORDY */
-		control |= 2;	/* IE enable */
-	/* Intel specifies that the PPE functionality is for disk only */
+		control |= 2;	/* IE */
+	/* Intel specifies that the prefetch/posting is for disk only */
 	if (adev->class == ATA_DEV_ATA)
-		control |= 4;	/* PPE enable */
+		control |= 4;	/* PPE */
 
 	pci_read_config_word(dev, idetm_port, &idetm_data);
 
-	/* Enable PPE, IE and TIME as appropriate */
-
+	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
 		idetm_data &= 0xCCF0;
 		idetm_data |= control;
@@ -129,7 +128,7 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is enabled */
+	idetm_data |= 0x4000;	/* Ensure SITRE is set */
 	pci_write_config_word(dev, idetm_port, idetm_data);
 }