wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer manager

Prefer the term "device" over "chip". Therefore, modify the relevant terms
in hal Rx return buffer manager to use "device" instead.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240430165811.1377182-2-quic_periyasa@quicinc.com

drivers/net/wireless/ath/ath12k/dp_rx.c

@@ -3071,7 +3071,7 @@ static int ath12k_dp_rx_h_defrag_reo_reinject(struct ath12k *ar,
 
 	ath12k_hal_rx_buf_addr_info_set(&reo_ent_ring->buf_addr_info, link_paddr,
 					cookie,
-					HAL_RX_BUF_RBM_WBM_CHIP0_IDLE_DESC_LIST);
+					HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST);
 
 	mpdu_info = u32_encode_bits(1, RX_MPDU_DESC_INFO0_MSDU_COUNT) |
 		    u32_encode_bits(0, RX_MPDU_DESC_INFO0_FRAG_FLAG) |
@@ -3451,7 +3451,7 @@ int ath12k_dp_rx_process_err(struct ath12k_base *ab, struct napi_struct *napi,
 			       (paddr - link_desc_banks[desc_bank].paddr);
 		ath12k_hal_rx_msdu_link_info_get(link_desc_va, &num_msdus, msdu_cookies,
 						 &rbm);
-		if (rbm != HAL_RX_BUF_RBM_WBM_CHIP0_IDLE_DESC_LIST &&
+		if (rbm != HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST &&
 		    rbm != HAL_RX_BUF_RBM_SW3_BM &&
 		    rbm != ab->hw_params->hal_params->rx_buf_rbm) {
 			ab->soc_stats.invalid_rbm++;

drivers/net/wireless/ath/ath12k/hal.h

@@ -770,12 +770,12 @@ struct hal_srng_config {
  * enum hal_rx_buf_return_buf_manager - manager for returned rx buffers
  *
  * @HAL_RX_BUF_RBM_WBM_IDLE_BUF_LIST: Buffer returned to WBM idle buffer list
- * @HAL_RX_BUF_RBM_WBM_CHIP0_IDLE_DESC_LIST: Descriptor returned to WBM idle
- *	descriptor list, where the chip 0 WBM is chosen in case of a multi-chip config
- * @HAL_RX_BUF_RBM_WBM_CHIP1_IDLE_DESC_LIST: Descriptor returned to WBM idle
- *	descriptor list, where the chip 1 WBM is chosen in case of a multi-chip config
- * @HAL_RX_BUF_RBM_WBM_CHIP2_IDLE_DESC_LIST: Descriptor returned to WBM idle
- *	descriptor list, where the chip 2 WBM is chosen in case of a multi-chip config
+ * @HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST: Descriptor returned to WBM idle
+ *	descriptor list, where the device 0 WBM is chosen in case of a multi-device config
+ * @HAL_RX_BUF_RBM_WBM_DEV1_IDLE_DESC_LIST: Descriptor returned to WBM idle
+ *	descriptor list, where the device 1 WBM is chosen in case of a multi-device config
+ * @HAL_RX_BUF_RBM_WBM_DEV2_IDLE_DESC_LIST: Descriptor returned to WBM idle
+ *	descriptor list, where the device 2 WBM is chosen in case of a multi-device config
  * @HAL_RX_BUF_RBM_FW_BM: Buffer returned to FW
  * @HAL_RX_BUF_RBM_SW0_BM: For ring 0 -- returned to host
  * @HAL_RX_BUF_RBM_SW1_BM: For ring 1 -- returned to host
@@ -788,9 +788,9 @@ struct hal_srng_config {
 
 enum hal_rx_buf_return_buf_manager {
 	HAL_RX_BUF_RBM_WBM_IDLE_BUF_LIST,
-	HAL_RX_BUF_RBM_WBM_CHIP0_IDLE_DESC_LIST,
-	HAL_RX_BUF_RBM_WBM_CHIP1_IDLE_DESC_LIST,
-	HAL_RX_BUF_RBM_WBM_CHIP2_IDLE_DESC_LIST,
+	HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST,
+	HAL_RX_BUF_RBM_WBM_DEV1_IDLE_DESC_LIST,
+	HAL_RX_BUF_RBM_WBM_DEV2_IDLE_DESC_LIST,
 	HAL_RX_BUF_RBM_FW_BM,
 	HAL_RX_BUF_RBM_SW0_BM,
 	HAL_RX_BUF_RBM_SW1_BM,