Commit 5fb6fdaf authored by John Youn's avatar John Youn Committed by Felipe Balbi

usb: dwc3: gadget: Fix dead code writing GCTL.RAMCLKSEL

The register programming code in dwc2_updated_ram_clk_sel() will never
be executed. And in fact the entire function can be removed as there is
no way to override the default value of GCTL.RAMCLKSEL. Remove the
function and add a comment explaining where GCTL.RAMCLKSEL should be
programmed if needed in the future.

This fixes dead code warnings in coverity.
Signed-off-by: default avatarJohn Youn <johnyoun@synopsys.com>
Signed-off-by: default avatarFelipe Balbi <felipe.balbi@linux.intel.com>
parent 3c220370
...@@ -2468,32 +2468,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) ...@@ -2468,32 +2468,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCFG, reg); dwc3_writel(dwc->regs, DWC3_DCFG, reg);
} }
static void dwc3_update_ram_clk_sel(struct dwc3 *dwc, u32 speed)
{
u32 reg;
u32 usb30_clock = DWC3_GCTL_CLK_BUS;
/*
* We change the clock only at SS but I dunno why I would want to do
* this. Maybe it becomes part of the power saving plan.
*/
if ((speed != DWC3_DSTS_SUPERSPEED) &&
(speed != DWC3_DSTS_SUPERSPEED_PLUS))
return;
/*
* RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
* each time on Connect Done.
*/
if (!usb30_clock)
return;
reg = dwc3_readl(dwc->regs, DWC3_GCTL);
reg |= DWC3_GCTL_RAMCLKSEL(usb30_clock);
dwc3_writel(dwc->regs, DWC3_GCTL, reg);
}
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{ {
struct dwc3_ep *dep; struct dwc3_ep *dep;
...@@ -2505,7 +2479,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) ...@@ -2505,7 +2479,14 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
speed = reg & DWC3_DSTS_CONNECTSPD; speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed; dwc->speed = speed;
dwc3_update_ram_clk_sel(dwc, speed); /*
* RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
* each time on Connect Done.
*
* Currently we always use the reset value. If any platform
* wants to set this to a different value, we need to add a
* setting and update GCTL.RAMCLKSEL here.
*/
switch (speed) { switch (speed) {
case DWC3_DSTS_SUPERSPEED_PLUS: case DWC3_DSTS_SUPERSPEED_PLUS:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment